Credential helper based on libsecret (in contrib/) has been updated
to handle an empty password correctly.
* mh/libsecret-empty-password-fix:
libsecret: retrieve empty password
Some parts of command line completion script (in contrib/) have
been micro-optimized.
* bb/completion-no-grep-into-awk:
completion: use awk for filtering the config entries
Variants of vimdiff learned to honor mergetool.<variant>.layout settings.
* km/mergetool-vimdiff-layout-fallback:
mergetools: vimdiff: use correct tool's name when reading mergetool config
"git tag --column" failed to check the exit status of its "git
column" invocation, which has been corrected.
* rj/tag-column-fix:
tag: error when git-column fails
"git am --help" now tells readers what actions are available in
"git am --whitespace=<action>", in addition to saying that the
option is passed through to the underlying "git apply".
* jc/am-whitespace-doc:
doc: add shortcut to "am --whitespace=<action>"
More tests that are marked as "ref-files only" have been updated to
improve test coverage of reftable backend.
* ps/ref-tests-update-even-more:
t7003: ensure filter-branch prunes reflogs with the reftable backend
t2011: exercise D/F conflicts with HEAD with the reftable backend
t1405: remove unneeded cleanup step
t1404: make D/F conflict tests compatible with reftable backend
t1400: exercise reflog with gaps with reftable backend
t0410: convert tests to use DEFAULT_REPO_FORMAT prereq
t: move tests exercising the "files" backend
Teach "git checkout -p" and friends that "@" is a synonym for
"HEAD".
* gt/at-is-synonym-for-head-in-add-patch:
add -p tests: remove PERL prerequisites
add-patch: classify '@' as a synonym for 'HEAD'
"git column" has been taught to reject negative padding value, as
it would lead to nonsense behaviour including division by zero.
* kh/column-reject-negative-padding:
column: guard against negative padding
column: disallow negative padding
Adjust use of "rev-list --missing" in an existing tests so that it
does not depend on a buggy failure mode.
* jc/t9210-lazy-fix:
t9210: do not rely on lazy fetching to fail
The code to iterate over refs with the reftable backend has seen
some optimization.
* ps/reftable-iteration-perf:
reftable/reader: add comments to `table_iter_next()`
reftable/record: don't try to reallocate ref record name
reftable/block: swap buffers instead of copying
reftable/pq: allocation-less comparison of entry keys
reftable/merged: skip comparison for records of the same subiter
reftable/merged: allocation-less dropping of shadowed records
reftable/record: introduce function to compare records by key
"git apply" on a filesystem without filemode support have learned
to take a hint from what is in the index for the path, even when
not working with the "--index" or "--cached" option, when checking
the executable bit match what is required by the preimage in the
patch.
* cp/apply-core-filemode:
apply: code simplification
apply: correctly reverse patch's pre- and post-image mode bits
apply: ignore working tree filemode when !core.filemode
Integrate the reftable code into the refs framework as a backend.
* ps/reftable-backend:
refs/reftable: fix leak when copying reflog fails
ci: add jobs to test with the reftable backend
refs: introduce reftable backend
Commit 97e9d0b78a (trailer: find the end of the log message, 2023-10-20)
combined two code paths for finding the end of the log message. For the
"no_divider" case, we used to use find_trailer_end(), and that has now
been rolled into find_end_of_log_message(). But there's a regression;
that function returns early when no_divider is set, returning the whole
string.
That's not how find_trailer_end() behaved. Although it did skip the
"---" processing (which is what "no_divider" is meant to do), we should
still respect ignored_log_message_bytes(), which covers things like
comments, "commit -v" cut lines, and so on.
The bug is actually in the interpret-trailers command, but the obvious
way to experience it is by running "commit -v" with a "--trailer"
option. The new trailer will be added at the end of the verbose diff,
rather than before it (and consequently will be ignored entirely, since
everything after the diff's intro scissors line is thrown away).
I've added two tests here: one for interpret-trailers directly, which
shows the bug via the parsing routines, and one for "commit -v".
The fix itself is pretty simple: instead of returning early, no_divider
just skips the "---" handling but still calls ignored_log_message_bytes().
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Perl implementation of add --interactive was removed in commit [1].
Additionally, the interactive.singleKey setting is no longer silently
ignored. The internal implementation of ReadKey [2] displays a warning
if the platform is unsupported.
[1] 20b813d7d (add: remove "add.interactive.useBuiltin" & Perl "git add--interactive", 2023-02-06)
[2] a5e46e6b0 (terminal: add a new function to read a single keystroke, 2020-01-14)
Signed-off-by: Julio Bacellari <julio.bacel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our lib-credential.sh library comes with a "clean" function that removes
all of the credentials used in its tests (to avoid leaving cruft in
system credential storage). But it's easy to add a test that uses a new
credential but forget to add it to the clean function. E.g., the case
fixed by 83e6eb7d7a (t/lib-credential: clean additional credential,
2024-02-15).
We should be able to catch this automatically, but it's a little tricky.
We can't just compare the contents of the helper's storage before and
after the test run, because there isn't a way to ask a helper to dump
all of its storage. And in most cases we don't have direct access to the
underlying storage (since the whole point of the helper is to abstract
that away). We can work around that by using our own "store" helper,
since we can directly inspect its state by looking at its on-disk file.
But there's a catch: the "store" helper doesn't support features like
caching or expiration, so using it naively fails tests (and skipping
those tests would give us incomplete coverage). Implementing all of
those features would be non-trivial. But we can hack around that by
overriding the "check" function used by the tests to turn most requests
into noop success (except for "approve" requests, which actually store
things).
And then at the end we can check that running the "clean" function takes
us back to an empty state.
Note that because we've skipped any tests that erase credentials
(because of our noop check function), the state we see at cleanup time
may be larger than it would be normally. That's OK. The point of the
clean function is to clean up any cruft we _might_ have left in place,
so we're just being doubly thorough.
The way this is bolted onto t0303 feels a little messy. But it's really
the best place to do it, because then we know that it is running the
exact sequence of tests that we'd use for testing a real external
helper. In a normal run of "make test" it currently does nothing (the
idea is that you run it manually after pointing it at some helper
program). But now with this patch, "make test" will sanity-check the
script itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0ce02e2f (credential/libsecret: store new attributes, 2023-06-16)
a test that stores empty username and password fails when
t0303-credential-external.sh is run with
GIT_TEST_CREDENTIAL_HELPER=libsecret.
Retrieve empty password carefully. This fixes test:
ok 14 - helper (libsecret) can store empty username
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The /mergetools/vimdiff script, which handles both vimdiff, nvimdiff
and gvimdiff mergetools (the latter 2 simply source the vimdiff script), has a
function merge_cmd() which read the layout variable from git config, and it
would always read the value of mergetool.**vimdiff**.layout, instead of the
mergetool being currently used (vimdiff or nvimdiff or gvimdiff).
It looks like in 7b5cf8be18 (vimdiff: add tool documentation, 2022-03-30),
we explained the current behavior in Documentation/config/mergetool.txt:
```
mergetool.vimdiff.layout::
The vimdiff backend uses this variable to control how its split
windows look like. Applies even if you are using Neovim (`nvim`) or
gVim (`gvim`) as the merge tool. See BACKEND SPECIFIC HINTS section
```
which makes sense why it's explained this way - the vimdiff backend is used by
gvim and nvim. But the mergetool's configuration should be separate for each tool,
and indeed that's confirmed in same commit at Documentation/mergetools/vimdiff.txt:
```
Variants
Instead of `--tool=vimdiff`, you can also use one of these other variants:
* `--tool=gvimdiff`, to open gVim instead of Vim.
* `--tool=nvimdiff`, to open Neovim instead of Vim.
When using these variants, in order to specify a custom layout you will have to
set configuration variables `mergetool.gvimdiff.layout` and
`mergetool.nvimdiff.layout` instead of `mergetool.vimdiff.layout`
```
So it looks like we just forgot to update the 1 part of the vimdiff script
that read the config variable. Cheers.
Though, for backward compatibility, I've kept the mergetool.vimdiff
fallback, so that people who unknowingly relied on it, won't have their
setup broken now.
Signed-off-by: Kipras Melnikovas <kipras@kipras.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the localized translation in 2.44, for zh_CN, we have
uniformly modified the translation of the word "commit-graph" to make it
more consistent with language usage habits.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Commits 1e0ee4087e (completion: add and use
__git_compute_first_level_config_vars_for_section, 2024-02-10) and
6e32f718ff (completion: add and use
__git_compute_second_level_config_vars_for_section, 2024-02-10)
introduced new helpers for config completion.
Both helpers use a pipeline of grep and awk to filter the list of config
entries. awk is perfectly capable of filtering, so let's eliminate the
grep process and move the filtering into the awk script.
The "-E" grep option (extended syntax) was not necessary, as $section is
a single word.
While at it, wrap the over-long lines to make them more readable.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we upgraded actions/setup-go to v5, the following warning message
was reported every time we ran the CI.
Restore cache failed: Dependencies file is not found ...
Disable cache to suppress warning messages as described in the solution
below.
https://github.com/actions/setup-go/issues/427
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
When we upgraded GitHub Actions "mshick/add-pr-comment" to v2, the
following warning message was reported every time we ran the CI.
Unexpected input(s) 'repo-token-user-login', valid inputs ...
Removed the obsolete parameter "repo-token-user-login" to suppress
warning messages.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
