This reverts commit 6436a20284.
The idea of that commit is that if read_ref_at() is counting back to the
Nth reflog but the reflog is short by one entry (e.g., because it was
pruned), we can find the oid of the missing entry by looking at the
"before" oid value of the entry that comes after it (whereas before, we
looked at the "after" value of each entry and complained that we
couldn't find the one from before the truncation).
This works fine for resolving the oid of ref@{n}, as it is used by
get_oid_basic(), which does not look at any other aspect of the reflog
we found (e.g., its timestamp or message). But there's another caller of
read_ref_at(): in show-branch we use it to walk over the reflog, and we
do care about the reflog entry. And so that commit broke "show-branch
--reflog"; it shows the reflog message for ref@{0} as ref@{1}, ref@{1}
as ref@{2}, and so on.
For example, in the new test in t3202 we produce:
! [branch@{0}] (0 seconds ago) commit: three
! [branch@{1}] (0 seconds ago) commit: three
! [branch@{2}] (60 seconds ago) commit: two
! [branch@{3}] (2 minutes ago) reset: moving to HEAD^
instead of the correct:
! [branch@{0}] (0 seconds ago) commit: three
! [branch@{1}] (60 seconds ago) commit: two
! [branch@{2}] (2 minutes ago) reset: moving to HEAD^
! [branch@{3}] (2 minutes ago) commit: one
But there's another bug, too: because it is looking at the "old" value
of the reflog after the one we're interested in, it has to special-case
ref@{0} (since there isn't anything after it). That's why it doesn't
show the offset bug in the output above. But this special-case code
fails to handle the situation where the reflog is empty or missing; it
returns success even though the reflog message out-parameter has been
left uninitialized. You can't trigger this through get_oid_basic(), but
"show-branch --reflog" will pretty reliably segfault as it tries to
access the garbage pointer.
Fixing the segfault would be pretty easy. But the off-by-one problem is
inherent in this approach. So let's start by reverting the commit to
give us a clean slate to work with.
This isn't a pure revert; all of the code changes are reverted, but for
the tests:
1. We'll flip the cases in t1508 to expect_failure; making these work
was the goal of 6436a2028, and we'll want to use them for our
replacement approach.
2. There's a test in t3202 for "show-branch --reflog", but it expects
the broken output! It was added by f2463490c4 (show-branch: show
reflog message, 2021-12-02) which was fixing another bug, and I
think the author simply didn't notice that the second line showed
the wrong reflog.
Rather than fixing that test, let's replace it with one that is
more thorough (while still covering the reflog message fix from
that commit). We'll use a longer reflog, which lets us see more
entries (thus making the "off by one" pattern much more clear). And
we'll use a more recent timestamp for "now" so that our relative
dates have more resolution. That lets us see that the reflog dates
are correct (whereas when you are 4 years away, two entries that
are 60 seconds apart will have the same "4 years ago" relative
date). Because we're adjusting the repository state, I've moved
this new test to the end of the script, leaving the other tests
undisturbed.
We'll also add a new test which covers the missing reflog case;
previously it segfaulted, but now it reports the empty reflog).
Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 97e9d0b78a (trailer: find the end of the log message, 2023-10-20)
combined two code paths for finding the end of the log message. For the
"no_divider" case, we used to use find_trailer_end(), and that has now
been rolled into find_end_of_log_message(). But there's a regression;
that function returns early when no_divider is set, returning the whole
string.
That's not how find_trailer_end() behaved. Although it did skip the
"---" processing (which is what "no_divider" is meant to do), we should
still respect ignored_log_message_bytes(), which covers things like
comments, "commit -v" cut lines, and so on.
The bug is actually in the interpret-trailers command, but the obvious
way to experience it is by running "commit -v" with a "--trailer"
option. The new trailer will be added at the end of the verbose diff,
rather than before it (and consequently will be ignored entirely, since
everything after the diff's intro scissors line is thrown away).
I've added two tests here: one for interpret-trailers directly, which
shows the bug via the parsing routines, and one for "commit -v".
The fix itself is pretty simple: instead of returning early, no_divider
just skips the "---" handling but still calls ignored_log_message_bytes().
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the localized translation in 2.44, for zh_CN, we have
uniformly modified the translation of the word "commit-graph" to make it
more consistent with language usage habits.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
After we upgraded actions/setup-go to v5, the following warning message
was reported every time we ran the CI.
Restore cache failed: Dependencies file is not found ...
Disable cache to suppress warning messages as described in the solution
below.
https://github.com/actions/setup-go/issues/427
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
When we upgraded GitHub Actions "mshick/add-pr-comment" to v2, the
following warning message was reported every time we ran the CI.
Unexpected input(s) 'repo-token-user-login', valid inputs ...
Removed the obsolete parameter "repo-token-user-login" to suppress
warning messages.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
* 'master' of github.com:git/git: (51 commits)
Hopefully the last batch of fixes before 2.44 final
Git 2.43.2
A few more fixes before -rc1
write-or-die: fix the polarity of GIT_FLUSH environment variable
A few more topics before -rc1
completion: add and use __git_compute_second_level_config_vars_for_section
completion: add and use __git_compute_first_level_config_vars_for_section
completion: complete 'submodule.*' config variables
completion: add space after config variable names also in Bash 3
receive-pack: use find_commit_header() in check_nonce()
ci(linux32): add a note about Actions that must not be updated
ci: bump remaining outdated Actions versions
unit-tests: do show relative file paths on non-Windows, too
receive-pack: use find_commit_header() in check_cert_push_options()
prune: mark rebase autostash and orig-head as reachable
sequencer: unset GIT_CHERRY_PICK_HELP for 'exec' commands
ref-filter.c: sort formatted dates by byte value
ssh signing: signal an error with a negative return value
bisect: document command line arguments for "bisect start"
bisect: document "terms" subcommand more fully
...
The command line completion script (in contrib/) learned to
complete configuration variable names better.
* pb/complete-config:
completion: add and use __git_compute_second_level_config_vars_for_section
completion: add and use __git_compute_first_level_config_vars_for_section
completion: complete 'submodule.*' config variables
completion: add space after config variable names also in Bash 3
The code paths that call repo_read_object_file() have been
tightened to react to errors.
* js/check-null-from-read-object-file:
Always check the return value of `repo_read_object_file()`
Code simplification.
* rs/receive-pack-remove-find-header:
receive-pack: use find_commit_header() in check_nonce()
receive-pack: use find_commit_header() in check_cert_push_options()
"git cherry-pick" invoked during "git rebase -i" session lost
the authorship information, which has been corrected.
* vn/rebase-with-cherry-pick-authorship:
sequencer: unset GIT_CHERRY_PICK_HELP for 'exec' commands
The sequencer machinery does not use the ref API and instead
records names of certain objects it needs for its correct operation
in temporary files, which makes these objects susceptible to loss
by garbage collection. These temporary files have been added as
starting points for reachability analysis to fix this.
* pw/gc-during-rebase:
prune: mark rebase autostash and orig-head as reachable
Some l10n translators translated the parameters "files", "param1" and
"param2" in the following message:
"synonym for --dirstat=files,param1,param2..."
Translating "param1" and "param2" is OK, but changing the parameter
"files" is wrong. The parameters that are not meant to be used verbatim
should be marked as placeholders, but the verbatim parameter not marked
as a placeholder should be left as is.
This change is a complement for commit 51e846e673 (doc: enforce
placeholders in documentation, 2023-12-25).
With the help of Jean-Noël,some parameter combinations in one
placeholder (e.g. "<param1,param2>...") are splited into seperate
placeholders.
Helped-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
