Johannes Sixt e8a1c686ae t3504: do check for conflict marker after failed cherry-pick
The test with disabled rerere should make sure that the cherry-picked
result does not have the conflict replaced with a recorded resolution.

It attempts to do so by ensuring that the file content is _not_ equal
to some other file. That by itself is a very dubious check because just
about every random result of an incomplete cherry-pick would satisfy
the condition.

In this case, the intent was to check that the conflicting file does
_not_ contain the resolved content. But the check actually uses the
wrong reference file, but not the resolved content. Needless to say
that the non-equality is satisfied. And, on top of it, it uses a commit
that does not even touch the file that is checked.

Do check for the expected result, which is content from both sides of
the merge and merge conflicts. (The latter we check for just the
middle separator for brevity.)

As a side-effect, this also removes an incorrect use of test_must_fail.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-27 12:56:02 -08:00
2019-12-06 16:31:39 +01:00
2019-10-24 13:34:03 +09:00
2019-12-06 16:31:39 +01:00
2019-12-06 16:31:40 +01:00
2019-05-14 16:45:01 +09:00
2019-09-28 14:04:16 +09:00
2019-10-15 13:48:02 +09:00
2019-08-19 15:04:58 -07:00
2019-10-15 13:48:02 +09:00
2019-07-19 11:30:20 -07:00
2019-07-09 15:25:44 -07:00
2019-07-09 15:25:44 -07:00
2019-07-25 13:59:20 -07:00
2019-08-19 15:04:58 -07:00
2019-10-15 13:48:00 +09:00
2019-10-07 11:32:58 +09:00
2019-10-15 13:48:02 +09:00
2019-12-06 16:31:39 +01:00
2019-12-06 16:31:39 +01:00
2019-10-11 14:24:46 +09:00
2019-09-12 11:03:51 -07:00
2019-07-09 15:25:43 -07:00
2019-05-05 15:20:10 +09:00
2019-10-15 13:48:02 +09:00
2019-08-19 15:04:57 -07:00
2019-10-15 13:48:02 +09:00
2019-12-06 16:31:39 +01:00
2019-12-06 16:31:39 +01:00
2019-12-06 16:31:30 +01:00
2019-07-25 13:59:20 -07:00
2019-12-06 16:31:39 +01:00
2019-12-06 16:31:23 +01:00
2019-12-06 16:31:40 +01:00
2019-08-30 10:22:42 -07:00
2019-09-30 13:19:24 +09:00
2019-08-15 12:37:10 -07:00
2019-04-22 11:14:43 +09:00
2019-10-15 13:48:02 +09:00
2019-01-14 12:13:04 -08:00
2019-08-19 15:05:00 -07:00
2019-07-19 11:30:20 -07:00
2019-07-19 11:30:20 -07:00
2019-05-05 15:20:10 +09:00
2019-10-15 13:48:02 +09:00
2019-12-06 16:31:39 +01:00
2019-02-06 22:05:23 -08:00
2019-02-05 14:26:09 -08:00
2018-11-02 12:14:21 +09:00
2019-09-17 09:39:16 -07:00
2019-10-15 13:48:02 +09:00
2019-10-15 13:48:02 +09:00
2019-12-06 16:31:39 +01:00
2019-10-12 21:29:30 +05:30
2019-10-15 13:48:02 +09:00
2019-04-01 11:57:39 +09:00
2019-12-06 16:31:40 +01:00
2019-08-19 15:04:59 -07:00
2019-10-15 13:48:02 +09:00
2019-10-15 13:48:02 +09:00
2019-05-05 15:20:10 +09:00
2019-09-30 13:19:26 +09:00
2019-10-11 14:24:46 +09:00
2019-10-11 14:24:48 +09:00
2019-02-05 14:26:11 -08:00
2019-12-06 16:31:39 +01:00
2019-12-06 16:31:30 +01:00
2019-12-06 16:31:30 +01:00
2018-12-09 12:37:32 +09:00
2019-09-05 14:10:18 -07:00
2019-09-05 14:10:18 -07:00
2019-05-13 23:50:35 +09:00
2019-08-13 12:21:33 -07:00
2019-05-05 15:20:10 +09:00
2019-12-06 16:31:39 +01:00
2019-12-06 16:31:39 +01:00
2019-09-03 15:10:53 -07:00
2019-12-06 16:31:39 +01:00
2019-10-12 10:57:39 +09:00
2019-10-09 14:01:00 +09:00
2018-10-19 13:34:02 +09:00
2019-10-11 14:24:46 +09:00

Build Status

Git - fast, scalable, distributed revision control system

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals.

Git is an Open Source project covered by the GNU General Public License version 2 (some parts of it are under different licenses, compatible with the GPLv2). It was originally written by Linus Torvalds with help of a group of hackers around the net.

Please read the file INSTALL for installation instructions.

Many Git online resources are accessible from https://git-scm.com/ including full documentation and Git related tools.

See Documentation/gittutorial.txt to get started, then see Documentation/giteveryday.txt for a useful minimum set of commands, and Documentation/git-<commandname>.txt for documentation of each command. If git has been correctly installed, then the tutorial can also be read with man gittutorial or git help tutorial, and the documentation of each command with man git-<commandname> or git help <commandname>.

CVS users may also want to read Documentation/gitcvs-migration.txt (man gitcvs-migration or git help cvs-migration if git is installed).

The user discussion and development of Git take place on the Git mailing list -- everyone is welcome to post bug reports, feature requests, comments and patches to git@vger.kernel.org (read Documentation/SubmittingPatches for instructions on patch submission). To subscribe to the list, send an email with just "subscribe git" in the body to majordomo@vger.kernel.org. The mailing list archives are available at https://public-inbox.org/git/, http://marc.info/?l=git and other archival sites.

Issues which are security relevant should be disclosed privately to the Git Security mailing list git-security@googlegroups.com.

The maintainer frequently sends the "What's cooking" reports that list the current status of various development topics to the mailing list. The discussion following them give a good reference for project status, development direction and remaining tasks.

The name "git" was given by Linus Torvalds when he wrote the very first version. He described the tool as "the stupid content tracker" and the name as (depending on your mood):

  • random three-letter combination that is pronounceable, and not actually used by any common UNIX command. The fact that it is a mispronunciation of "get" may or may not be relevant.
  • stupid. contemptible and despicable. simple. Take your pick from the dictionary of slang.
  • "global information tracker": you're in a good mood, and it actually works for you. Angels sing, and a light suddenly fills the room.
  • "goddamn idiotic truckload of sh*t": when it breaks
Description
No description provided
Readme 279 MiB
Languages
C 50.5%
Shell 38.7%
Perl 4.5%
Tcl 3.2%
Python 0.8%
Other 2.1%