The reflog iterator enumerates all reflogs known to a ref backend. In
the "reftable" backend there is no way to list all existing reflogs
directly. Instead, we have to iterate through all reflog entries and
discard all those redundant entries for which we have already returned a
reflog entry.
This logic is implemented by tracking the last reflog name that we have
emitted to the iterator's user. If the next log record has the same name
we simply skip it until we find another record with a different refname.
This last reflog name is stored in a simple C string, which requires us
to free and reallocate it whenever we need to update the reflog name.
Convert it to use a `struct strbuf` instead, which reduces the number of
allocations. Before:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 1,068,485 allocs, 1,068,363 frees, 281,122,886 bytes allocated
After:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 68,485 allocs, 68,363 frees, 256,234,072 bytes allocated
Note that even after this change we still allocate quite a lot of data,
even though the number of allocations does not scale with the number of
log records anymore. This remainder comes mostly from decompressing the
log blocks, where we decompress each block into newly allocated memory.
This will be addressed at a later point in time.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When decoding log records we need a temporary buffer to decode the
reflog entry's name, mail address and message. As this buffer is local
to the function we thus have to reallocate it for every single log
record which we're about to decode, which is inefficient.
Refactor the code such that callers need to pass in a scratch buffer,
which allows us to reuse it for multiple decodes. This reduces the
number of allocations when iterating through reflogs. Before:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 2,068,487 allocs, 2,068,365 frees, 305,122,946 bytes allocated
After:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 1,068,485 allocs, 1,068,363 frees, 281,122,886 bytes allocated
Note that this commit also drop some redundant calls to `strbuf_reset()`
right before calling `decode_string()`. The latter already knows to
reset the buffer, so there is no need for these.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Same as the preceding commit we can allocate log messages as needed when
decoding log records, thus further reducing the number of allocations.
Before:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 3,068,488 allocs, 3,068,366 frees, 307,122,961 bytes allocated
After:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 2,068,487 allocs, 2,068,365 frees, 305,122,946 bytes allocated
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When decoding a log record we always reallocate their refname arrays.
This results in quite a lot of needless allocation churn.
Refactor the code to grow the array as required only. Like this, we
should usually only end up reallocating the array a small handful of
times when iterating over many refs. Before:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 4,068,487 allocs, 4,068,365 frees, 332,011,793 bytes allocated
After:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 3,068,488 allocs, 3,068,366 frees, 307,122,961 bytes allocated
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each reflog entry contains information regarding the authorship of who
has made the change. This authorship information is not the same as that
of any of the commits that the reflog entry references, but instead
corresponds to the local user that has executed the command. Thus, it is
almost always the case that all reflog entries have the same author.
We can make use of this fact when decoding reftable records: instead of
freeing and then reallocating the authorship information of log records,
we can special-case when the next record during an iteration has the
exact same authorship as the preceding record. If so, then there is no
need to reallocate the respective fields.
This change results in two allocations less per log record that we're
iterating over in the most common case. Before:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 6,068,489 allocs, 6,068,367 frees, 361,011,822 bytes allocated
After:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 4,068,487 allocs, 4,068,365 frees, 332,011,793 bytes allocated
An alternative would be to store the capacity of both name and email and
then use `REFTABLE_ALLOC_GROW()` to conditionally reallocate the array.
But reftable records are copied around quite a lot, and thus we need to
be a bit mindful of the overall record size. Furthermore, a memory
comparison should also be more efficient than having to copy over memory
even if we wouldn't have to allocate a new array every time.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7af607c58d (reftable/record: store "val1" hashes as static arrays,
2024-01-03) and b31e3cc620 (reftable/record: store "val2" hashes as
static arrays, 2024-01-03) we have converted ref records to store their
object IDs in a static array. Convert log records to do the same so that
their old and new object IDs are arrays, too.
This change results in two allocations less per log record that we're
iterating over. Before:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 8,068,495 allocs, 8,068,373 frees, 401,011,862 bytes allocated
After:
HEAP SUMMARY:
in use at exit: 13,473 bytes in 122 blocks
total heap usage: 6,068,489 allocs, 6,068,367 frees, 361,011,822 bytes allocated
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new reflog iterator, we first have to reload the stack
that the iterator is being created. This is done so that any concurrent
writes to the stack are reflected. But `reflog_iterator_for_stack()`
always reloads the main stack, which is wrong.
Fix this and reload the correct stack.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/reftable-iteration-perf-part2:
refs/reftable: precompute prefix length
reftable: allow inlining of a few functions
reftable/record: decode keys in place
reftable/record: reuse refname when copying
reftable/record: reuse refname when decoding
reftable/merged: avoid duplicate pqueue emptiness check
reftable/merged: circumvent pqueue with single subiter
reftable/merged: handle subiter cleanup on close only
reftable/merged: remove unnecessary null check for subiters
reftable/merged: make subiters own their records
reftable/merged: advance subiter on subsequent iteration
reftable/merged: make `merged_iter` structure private
reftable/pq: use `size_t` to track iterator index
We're recomputing the prefix length on every iteration of the ref
iterator. Precompute it for another speedup when iterating over 1
million refs:
Benchmark 1: show-ref: single matching ref (revision = HEAD~)
Time (mean ± σ): 100.3 ms ± 3.7 ms [User: 97.3 ms, System: 2.8 ms]
Range (min … max): 97.5 ms … 139.7 ms 1000 runs
Benchmark 2: show-ref: single matching ref (revision = HEAD)
Time (mean ± σ): 95.8 ms ± 3.4 ms [User: 92.9 ms, System: 2.8 ms]
Range (min … max): 93.0 ms … 121.9 ms 1000 runs
Summary
show-ref: single matching ref (revision = HEAD) ran
1.05 ± 0.05 times faster than show-ref: single matching ref (revision = HEAD~)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a few functions which are basically just accessors to
structures. As those functions are executed inside the hot loop when
iterating through many refs, the fact that they cannot be inlined is
costing us some performance.
Move the function definitions into their respective headers so that they
can be inlined. This results in a performance improvement when iterating
over 1 million refs:
Benchmark 1: show-ref: single matching ref (revision = HEAD~)
Time (mean ± σ): 105.9 ms ± 3.6 ms [User: 103.0 ms, System: 2.8 ms]
Range (min … max): 103.1 ms … 133.4 ms 1000 runs
Benchmark 2: show-ref: single matching ref (revision = HEAD)
Time (mean ± σ): 100.7 ms ± 3.4 ms [User: 97.8 ms, System: 2.8 ms]
Range (min … max): 97.8 ms … 124.0 ms 1000 runs
Summary
show-ref: single matching ref (revision = HEAD) ran
1.05 ± 0.05 times faster than show-ref: single matching ref (revision = HEAD~)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading a record from a block, we need to decode the record's key.
As reftable keys are prefix-compressed, meaning they reuse a prefix from
the preceding record's key, this is a bit more involved than just having
to copy the relevant bytes: we need to figure out the prefix and suffix
lengths, copy the prefix from the preceding record and finally copy the
suffix from the current record.
This is done by passing three buffers to `reftable_decode_key()`: one
buffer that holds the result, one buffer that holds the last key, and
one buffer that points to the current record. The final key is then
assembled by calling `strbuf_add()` twice to copy over the prefix and
suffix.
Performing two memory copies is inefficient though. And we can indeed do
better by decoding keys in place. Instead of providing two buffers, the
caller may only call a single buffer that is already pre-populated with
the last key. Like this, we only have to call `strbuf_setlen()` to trim
the record to its prefix and then `strbuf_add()` to add the suffix.
This refactoring leads to a noticeable performance bump when iterating
over 1 million refs:
Benchmark 1: show-ref: single matching ref (revision = HEAD~)
Time (mean ± σ): 112.2 ms ± 3.9 ms [User: 109.3 ms, System: 2.8 ms]
Range (min … max): 109.2 ms … 149.6 ms 1000 runs
Benchmark 2: show-ref: single matching ref (revision = HEAD)
Time (mean ± σ): 106.0 ms ± 3.5 ms [User: 103.2 ms, System: 2.7 ms]
Range (min … max): 103.2 ms … 133.7 ms 1000 runs
Summary
show-ref: single matching ref (revision = HEAD) ran
1.06 ± 0.05 times faster than show-ref: single matching ref (revision = HEAD~)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do the same optimization as in the preceding commit, but this time for
`reftable_record_copy()`. While not as noticeable, it still results in a
small speedup when iterating over 1 million refs:
Benchmark 1: show-ref: single matching ref (revision = HEAD~)
Time (mean ± σ): 114.0 ms ± 3.8 ms [User: 111.1 ms, System: 2.7 ms]
Range (min … max): 110.9 ms … 144.3 ms 1000 runs
Benchmark 2: show-ref: single matching ref (revision = HEAD)
Time (mean ± σ): 112.5 ms ± 3.7 ms [User: 109.5 ms, System: 2.8 ms]
Range (min … max): 109.2 ms … 140.7 ms 1000 runs
Summary
show-ref: single matching ref (revision = HEAD) ran
1.01 ± 0.05 times faster than show-ref: single matching ref (revision = HEAD~)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When decoding a reftable record we will first release the user-provided
record and then decode the new record into it. This is quite inefficient
as we basically need to reallocate at least the refname every time.
Refactor the function to start tracking the refname capacity. Like this,
we can stow away the refname, release, restore and then grow the refname
to the required number of bytes via `REFTABLE_ALLOC_GROW()`.
This refactoring is safe to do because all functions that assigning to
the refname will first call `reftable_ref_record_release()`, which will
zero out the complete record after releasing memory.
This change results in a nice speedup when iterating over 1 million
refs:
Benchmark 1: show-ref: single matching ref (revision = HEAD~)
Time (mean ± σ): 124.0 ms ± 3.9 ms [User: 121.1 ms, System: 2.7 ms]
Range (min … max): 120.4 ms … 152.7 ms 1000 runs
Benchmark 2: show-ref: single matching ref (revision = HEAD)
Time (mean ± σ): 114.4 ms ± 3.7 ms [User: 111.5 ms, System: 2.7 ms]
Range (min … max): 111.0 ms … 152.1 ms 1000 runs
Summary
show-ref: single matching ref (revision = HEAD) ran
1.08 ± 0.05 times faster than show-ref: single matching ref (revision = HEAD~)
Furthermore, with this change we now perform a mostly constant number of
allocations when iterating. Before this change:
HEAP SUMMARY:
in use at exit: 13,603 bytes in 125 blocks
total heap usage: 1,006,620 allocs, 1,006,495 frees, 25,398,363 bytes allocated
After this change:
HEAP SUMMARY:
in use at exit: 13,603 bytes in 125 blocks
total heap usage: 6,623 allocs, 6,498 frees, 509,592 bytes allocated
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `merged_iter_next_void()` we first check whether the iter
has been exhausted already. We already perform this check two levels
down the stack in `merged_iter_next_entry()` though, which makes this
check redundant.
Now if this check was there to accelerate the common case it might have
made sense to keep it. But the iterator being exhausted is rather the
uncommon case because you can expect most reftable stacks to contain
more than two refs.
Simplify the code by removing the check. As `merged_iter_next_void()` is
basically empty except for calling `merged_iter_next()` now, merge these
two functions. This also results in a tiny speedup when iterating over
many refs:
Benchmark 1: show-ref: single matching ref (revision = HEAD~)
Time (mean ± σ): 125.6 ms ± 3.8 ms [User: 122.7 ms, System: 2.8 ms]
Range (min … max): 122.4 ms … 153.4 ms 1000 runs
Benchmark 2: show-ref: single matching ref (revision = HEAD)
Time (mean ± σ): 124.0 ms ± 3.9 ms [User: 121.1 ms, System: 2.8 ms]
Range (min … max): 120.1 ms … 156.4 ms 1000 runs
Summary
show-ref: single matching ref (revision = HEAD) ran
1.01 ± 0.04 times faster than show-ref: single matching ref (revision = HEAD~)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merged iterator uses a priority queue to order records so that we
can yielid them in the expected order. This priority queue of course
comes with some overhead as we need to add, compare and remove entries
in that priority queue.
In the general case, that overhead cannot really be avoided. But when we
have a single subiter left then there is no need to use the priority
queue anymore because the order is exactly the same as what that subiter
would return.
While having a single subiter may sound like an edge case, it happens
more frequently than one might think. In the most common scenario, you
can expect a repository to have a single large table that contains most
of the records and then a set of smaller tables which contain later
additions to the reftable stack. In this case it is quite likely that we
exhaust subiters of those smaller stacks before exhausting the large
table.
Special-case this and return records directly from the remaining
subiter. This results in a sizeable speedup when iterating over 1m refs
in a repository with a single table:
Benchmark 1: show-ref: single matching ref (revision = HEAD~)
Time (mean ± σ): 135.4 ms ± 4.4 ms [User: 132.5 ms, System: 2.8 ms]
Range (min … max): 131.0 ms … 166.3 ms 1000 runs
Benchmark 2: show-ref: single matching ref (revision = HEAD)
Time (mean ± σ): 126.3 ms ± 3.9 ms [User: 123.3 ms, System: 2.8 ms]
Range (min … max): 122.7 ms … 157.0 ms 1000 runs
Summary
show-ref: single matching ref (revision = HEAD) ran
1.07 ± 0.05 times faster than show-ref: single matching ref (revision = HEAD~)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When advancing one of the subiters fails we immediately release
resources associated with that subiter. This is not necessary though as
we will release these resources when closing the merged iterator anyway.
Drop the logic and only release resources when the merged iterator is
done. This is a mere cleanup that should help reduce the cognitive load
when reading through the code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever we advance a subiter we first call `iterator_is_null()`. This
is not needed though because we only ever advance subiters which have
entries in the priority queue, and we do not end entries to the priority
queue when the subiter has been exhausted.
Drop the check as well as the now-unused function. This results in a
surprisingly big speedup:
Benchmark 1: show-ref: single matching ref (revision = HEAD~)
Time (mean ± σ): 138.1 ms ± 4.4 ms [User: 135.1 ms, System: 2.8 ms]
Range (min … max): 133.4 ms … 167.3 ms 1000 runs
Benchmark 2: show-ref: single matching ref (revision = HEAD)
Time (mean ± σ): 134.4 ms ± 4.2 ms [User: 131.5 ms, System: 2.8 ms]
Range (min … max): 130.0 ms … 164.0 ms 1000 runs
Summary
show-ref: single matching ref (revision = HEAD) ran
1.03 ± 0.05 times faster than show-ref: single matching ref (revision = HEAD~)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For each subiterator, the merged table needs to track their current
record. This record is owned by the priority queue though instead of by
the merged iterator. This is not optimal performance-wise.
For one, we need to move around records whenever we add or remove a
record from the priority queue. Thus, the bigger the entries the more
bytes we need to copy around. And compared to pointers, a reftable
record is rather on the bigger side. The other issue is that this makes
it harder to reuse the records.
Refactor the code so that the merged iterator tracks ownership of the
records per-subiter. Instead of having records in the priority queue, we
can now use mere pointers to the per-subiter records. This also allows
us to swap records between the caller and the per-subiter record instead
of doing an actual copy via `reftable_record_copy_from()`, which removes
the need to release the caller-provided record.
This results in a noticeable speedup when iterating through many refs.
The following benchmark iterates through 1 million refs:
Benchmark 1: show-ref: single matching ref (revision = HEAD~)
Time (mean ± σ): 145.5 ms ± 4.5 ms [User: 142.5 ms, System: 2.8 ms]
Range (min … max): 141.3 ms … 177.0 ms 1000 runs
Benchmark 2: show-ref: single matching ref (revision = HEAD)
Time (mean ± σ): 139.0 ms ± 4.7 ms [User: 136.1 ms, System: 2.8 ms]
Range (min … max): 134.2 ms … 182.2 ms 1000 runs
Summary
show-ref: single matching ref (revision = HEAD) ran
1.05 ± 0.05 times faster than show-ref: single matching ref (revision = HEAD~)
This refactoring also allows a subsequent refactoring where we start
reusing memory allocated by the reftable records because we do not need
to release the caller-provided record anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When advancing the merged iterator, we pop the topmost entry from its
priority queue and then advance the sub-iterator that the entry belongs
to, adding the result as a new entry. This is quite sensible in the case
where the merged iterator is used to actually iterate through records.
But the merged iterator is also used when we look up a single record,
only, so advancing the sub-iterator is wasted effort because we would
never even look at the result.
Instead of immediately advancing the sub-iterator, we can also defer
this to the next iteration of the merged iterator by storing the
intent-to-advance. This results in a small speedup when reading many
records. The following benchmark creates 10000 refs, which will also end
up with many ref lookups:
Benchmark 1: update-ref: create many refs (revision = HEAD~)
Time (mean ± σ): 337.2 ms ± 7.3 ms [User: 200.1 ms, System: 136.9 ms]
Range (min … max): 329.3 ms … 373.2 ms 100 runs
Benchmark 2: update-ref: create many refs (revision = HEAD)
Time (mean ± σ): 332.5 ms ± 5.9 ms [User: 197.2 ms, System: 135.1 ms]
Range (min … max): 327.6 ms … 359.8 ms 100 runs
Summary
update-ref: create many refs (revision = HEAD) ran
1.01 ± 0.03 times faster than update-ref: create many refs (revision = HEAD~)
While this speedup alone isn't really worth it, this refactoring will
also allow two additional optimizations in subsequent patches. First, it
will allow us to special-case when there is only a single sub-iter left
to circumvent the priority queue altogether. And second, it makes it
easier to avoid copying records to the caller.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `merged_iter` structure is not used anywhere outside of "merged.c",
but is declared in its header. Move it into the code file so that it is
clear that its implementation details are never exposed to anything.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reftable priority queue is used by the merged iterator to yield
records from its sub-iterators in the expected order. Each entry has a
record corresponding to such a sub-iterator as well as an index that
indicates which sub-iterator the record belongs to. But while the
sub-iterators are tracked with a `size_t`, we store the index as an
`int` in the entry.
Fix this and use `size_t` consistently.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Practice the new mark-up rule for <placeholders> with "git add"
documentation page.
* jc/doc-add-placeholder-fix:
doc: apply the new placeholder rules to git-add documentation
The way placeholders are to be marked-up in documentation have been
specified; use "_<placeholder>_" to typeset the word inside a pair
of <angle-brakets> emphasized.
* ja/doc-placeholders-markup-rules:
doc: clarify the format of placeholders
"git reflog" learned a "list" subcommand that enumerates known reflogs.
* ps/reflog-list:
builtin/reflog: introduce subcommand to list reflogs
refs: stop resolving ref corresponding to reflogs
refs: drop unused params from the reflog iterator callback
refs: always treat iterators as ordered
refs/files: sort merged worktree and common reflogs
refs/files: sort reflogs returned by the reflog iterator
dir-iterator: support iteration in sorted order
dir-iterator: pass name to `prepare_next_entry_data()` directly
Doc update.
* ja/docfixes:
doc: end sentences with full-stop
doc: close unclosed angle-bracket of a placeholder in git-clone doc
doc: git-rev-parse: enforce command-line description syntax
"git difftool --dir-diff" learned to honor the "--trust-exit-code"
option; it used to always exit with 0 and signalled success.
* ps/difftool-dir-diff-exit-code:
git-difftool--helper: honor `--trust-exit-code` with `--dir-diff`
Credential helper based on libsecret (in contrib/) has been updated
to handle an empty password correctly.
* mh/libsecret-empty-password-fix:
libsecret: retrieve empty password
Some parts of command line completion script (in contrib/) have
been micro-optimized.
* bb/completion-no-grep-into-awk:
completion: use awk for filtering the config entries
Variants of vimdiff learned to honor mergetool.<variant>.layout settings.
* km/mergetool-vimdiff-layout-fallback:
mergetools: vimdiff: use correct tool's name when reading mergetool config
"git tag --column" failed to check the exit status of its "git
column" invocation, which has been corrected.
* rj/tag-column-fix:
tag: error when git-column fails
"git am --help" now tells readers what actions are available in
"git am --whitespace=<action>", in addition to saying that the
option is passed through to the underlying "git apply".
* jc/am-whitespace-doc:
doc: add shortcut to "am --whitespace=<action>"
More tests that are marked as "ref-files only" have been updated to
improve test coverage of reftable backend.
* ps/ref-tests-update-even-more:
t7003: ensure filter-branch prunes reflogs with the reftable backend
t2011: exercise D/F conflicts with HEAD with the reftable backend
t1405: remove unneeded cleanup step
t1404: make D/F conflict tests compatible with reftable backend
t1400: exercise reflog with gaps with reftable backend
t0410: convert tests to use DEFAULT_REPO_FORMAT prereq
t: move tests exercising the "files" backend
Teach "git checkout -p" and friends that "@" is a synonym for
"HEAD".
* gt/at-is-synonym-for-head-in-add-patch:
add -p tests: remove PERL prerequisites
add-patch: classify '@' as a synonym for 'HEAD'
"git column" has been taught to reject negative padding value, as
it would lead to nonsense behaviour including division by zero.
* kh/column-reject-negative-padding:
column: guard against negative padding
column: disallow negative padding
Adjust use of "rev-list --missing" in an existing tests so that it
does not depend on a buggy failure mode.
* jc/t9210-lazy-fix:
t9210: do not rely on lazy fetching to fail
The code to iterate over refs with the reftable backend has seen
some optimization.
* ps/reftable-iteration-perf:
reftable/reader: add comments to `table_iter_next()`
reftable/record: don't try to reallocate ref record name
reftable/block: swap buffers instead of copying
reftable/pq: allocation-less comparison of entry keys
reftable/merged: skip comparison for records of the same subiter
reftable/merged: allocation-less dropping of shadowed records
reftable/record: introduce function to compare records by key
"git apply" on a filesystem without filemode support have learned
to take a hint from what is in the index for the path, even when
not working with the "--index" or "--cached" option, when checking
the executable bit match what is required by the preimage in the
patch.
* cp/apply-core-filemode:
apply: code simplification
apply: correctly reverse patch's pre- and post-image mode bits
apply: ignore working tree filemode when !core.filemode
Integrate the reftable code into the refs framework as a backend.
* ps/reftable-backend:
refs/reftable: fix leak when copying reflog fails
ci: add jobs to test with the reftable backend
refs: introduce reftable backend
