When we call get_remote_heads() for protocol v0, that may populate the
"shallow" oid_array, which must be cleaned up to avoid a leak at the
program exit. The same problem exists for both fetch-pack and send-pack,
but not for the usual transport.c code paths, since we already do this
cleanup in disconnect_git().
Fixing this lets us mark t5542 as leak-free for the send-pack side, but
fetch-pack will need some more fixes before we can do the same for
t5539.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our fetch_pack_args holds a filter_options struct that may be populated
with allocated strings by the by the "--filter" command-line option. We
must free it before exiting to avoid a leak when the program exits.
The usual fetch code paths that use transport.c don't have the same
leak, because we do the cleanup in disconnect_git().
Fixing this leak lets us mark t5500 as leak-free.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_connect() function has a special CONNECT_DIAG_URL mode, where we
stop short of actually connecting to the other side and just print some
parsing details. For URLs that require a child process (like ssh), we
free() the child_process struct but forget to clear it, leaking the
strings we stuffed into its "env" list.
This leak is triggered many times in t5500, which uses "fetch-pack
--diag-url", but we're not yet ready to mark it as leak-free.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `fetch_pack()` the caller is expected to pass in a set of
sought-after refs that they want to fetch. This array gets massaged to
not contain duplicate entries, which is done by replacing duplicate refs
with `NULL` pointers. This modifies the caller-provided array, and in
case we do unset any pointers the caller now loses track of that ref and
cannot free it anymore.
Now the obvious fix would be to not only unset these pointers, but to
also free their contents. But this doesn't work because callers continue
to use those refs. Another potential solution would be to copy the array
in `fetch_pack()` so that we dont modify the caller-provided one. But
that doesn't work either because the NULL-ness of those entries is used
by callers to skip over ref entries that we didn't even try to fetch in
`report_unmatched_refs()`.
Instead, we make it the responsibility of our callers to duplicate these
arrays as needed. It ain't pretty, but it works to plug the memory leak.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unregistering a shallow root we shrink the array of grafts by one
and move remaining grafts one to the left. This can of course only
happen when there are any grafts left, because otherwise there is
nothing to move. As such, this code is guarded by a condition that only
performs the move in case there are grafts after the position of the
graft to be unregistered.
By mistake we also put the call to free the unregistered graft into that
condition. But that doesn't make any sense, as we want to always free
the graft when it exists. Fix the resulting memory leak by doing so.
This leak is exposed by t5500, but plugging it does not make the whole
test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never clear the arguments that we pass to git-index-pack(1). Create a
common exit path and release them there to plug this leak.
This is leak is exposed by t5702, but plugging the leak does not make
the whole test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
A few usability fixes to "git jump" (in contrib/).
* jk/jump-quickfix-fixes:
git-jump: ignore deleted files in diff mode
git-jump: always specify column 1 for diff entries
When a remote-helper dies before Git writes to it, SIGPIPE killed
Git silently. We now explain the situation a bit better to the end
user in our error message.
* jk/diag-unexpected-remote-helper-death:
print an error when remote helpers die during capabilities
Code clean-up.
* ps/environ-wo-the-repository: (21 commits)
environment: stop storing "core.notesRef" globally
environment: stop storing "core.warnAmbiguousRefs" globally
environment: stop storing "core.preferSymlinkRefs" globally
environment: stop storing "core.logAllRefUpdates" globally
refs: stop modifying global `log_all_ref_updates` variable
branch: stop modifying `log_all_ref_updates` variable
repo-settings: track defaults close to `struct repo_settings`
repo-settings: split out declarations into a standalone header
environment: guard state depending on a repository
environment: reorder header to split out `the_repository`-free section
environment: move `set_git_dir()` and related into setup layer
environment: make `get_git_namespace()` self-contained
environment: move object database functions into object layer
config: make dependency on repo in `read_early_config()` explicit
config: document `read_early_config()` and `read_very_early_config()`
environment: make `get_git_work_tree()` accept a repository
environment: make `get_graft_file()` accept a repository
environment: make `get_index_file()` accept a repository
environment: make `get_object_directory()` accept a repository
environment: make `get_git_common_dir()` accept a repository
...
The interpret-trailers command failed to recognise the end of the
message when the commit log ends in an incomplete line.
* bl/trailers-and-incomplete-last-line-fix:
interpret-trailers: handle message without trailing newline
Cygwin does have /dev/tty support that is needed by things like
single-key input mode.
* rj/cygwin-has-dev-tty:
config.mak.uname: add HAVE_DEV_TTY to cygwin config section
In a few corner cases "git diff --exit-code" failed to report
"changes" (e.g., renamed without any content change), which has
been corrected.
* rs/diff-exit-code-fix:
diff: report dirty submodules as changes in builtin_diff()
diff: report copies and renames as changes in run_diff_cmd()
Merge the topics that have been cooking since 2024-09-13 or so in
'next'.
Let's try a new workflow to update the maintenance track by removing
the "merge ... later to maint" comments from the draft release notes
on the 'master' track.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Git 2.39, Git.pm stopped working in a bare repository, which has
been corrected.
* jk/git-pm-bare-repo-fix:
Git.pm: use "rev-parse --absolute-git-dir" rather than perl code
Git.pm: fix bare repository search with Directory option
The support to customize build options to adjust for older versions
and/or older systems for the interop tests has been improved.
* jk/interop-test-build-options:
t/interop: allow per-version make options
The "imap-send" now allows to be compiled with NO_OPENSSL and
OPENSSL_SHA1 defined together.
* jk/no-openssl-with-openssl-sha1:
imap-send: handle NO_OPENSSL even when openssl exists
"git rebase --autostash" failed to resurrect the autostashed
changes when the command gets aborted after giving back control
asking for hlep in conflict resolution.
* pw/rebase-autostash-fix:
rebase: apply and cleanup autostash when rebase fails to start
The error messages from the test script checker have been improved.
* es/chainlint-message-updates:
chainlint: reduce annotation noise-factor
chainlint: make error messages self-explanatory
chainlint: don't be fooled by "?!...?!" in test body
Import clar unit tests framework libgit2 folks invented for our
use.
* ps/clar-unit-test:
Makefile: rename clar-related variables to avoid confusion
clar: add CMake support
t/unit-tests: convert ctype tests to use clar
t/unit-tests: convert strvec tests to use clar
t/unit-tests: implement test driver
Makefile: wire up the clar unit testing framework
Makefile: do not use sparse on third-party sources
Makefile: make hdr-check depend on generated headers
Makefile: fix sparse dependency on GENERATED_H
clar: stop including `shellapi.h` unnecessarily
clar(win32): avoid compile error due to unused `fs_copy()`
clar: avoid compile error with mingw-w64
t/clar: fix compatibility with NonStop
t: import the clar unit testing framework
t: do not pass GIT_TEST_OPTS to unit tests with prove
This batch is solely to unbreak the 32-bit CI jobs that can no
longer work with Ubuntu xenial image that is too ancient.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI updates
* jk/ci-linux32-update:
ci: add Ubuntu 16.04 job to GitLab CI
ci: use regular action versions for linux32 job
ci: use more recent linux32 image
ci: unify ubuntu and ubuntu32 dependencies
ci: drop run-docker scripts
CI started failing completely for linux32 jobs, as the step to
upload failed test directory uses GitHub actions that is deprecated
and is now disabled. Remove the step so at least we will know if
the tests are passing.
* jc/ci-upload-artifact-and-linux32:
ci: remove 'Upload failed tests' directories' step from linux32 jobs
CI updates
* jk/ci-linux32-update:
ci: add Ubuntu 16.04 job to GitLab CI
ci: use regular action versions for linux32 job
ci: use more recent linux32 image
ci: unify ubuntu and ubuntu32 dependencies
ci: drop run-docker scripts
CI started failing completely for linux32 jobs, as the step to
upload failed test directory uses GitHub actions that is deprecated
and is now disabled. Remove the step so at least we will know if
the tests are passing.
* jc/ci-upload-artifact-and-linux32:
ci: remove 'Upload failed tests' directories' step from linux32 jobs
Bugfixes and leak plugging in "git for-each-ref --format=..." code
paths.
* jk/ref-filter-trailer-fixes:
ref-filter: fix leak with unterminated %(if) atoms
ref-filter: add ref_format_clear() function
ref-filter: fix leak when formatting %(push:remoteref)
ref-filter: fix leak with %(describe) arguments
ref-filter: fix leak of %(trailers) "argbuf"
ref-filter: store ref_trailer_buf data per-atom
ref-filter: drop useless cast in trailers_atom_parser()
ref-filter: strip signature when parsing tag trailers
ref-filter: avoid extra copies of payload/signature
t6300: drop newline from wrapped test title
Code clean-up.
* jc/range-diff-lazy-setup:
remerge-diff: clean up temporary objdir at a central place
remerge-diff: lazily prepare temporary objdir on demand
Another reftable test migrated to the unit-test framework.
* cp/unit-test-reftable-stack:
t-reftable-stack: add test for stack iterators
t-reftable-stack: add test for non-default compaction factor
t-reftable-stack: use reftable_ref_record_equal() to compare ref records
t-reftable-stack: use Git's tempfile API instead of mkstemp()
t: harmonize t-reftable-stack.c with coding guidelines
t: move reftable/stack_test.c to the unit testing framework
In the test "cc list is sanitized", we feed a commit with a variety of
trailers to send-email, and then check its output to see how it handled
them. For most of them, we are grepping for a specific mention of the
header, but there's a "BugID" header which we expect to be ignored. We
confirm this by grepping for "12345", the fake BugID, and making sure it
is not present.
But we can be fooled by false positives! I just tracked down a flaky
test failure here that was caused by matching this unrelated line in the
output:
<20240914090449.612345-1-author@example.com>
which will change from run to run based on the time, pid, etc.
Ideally we'd tighten the regex to make this more specifically, but since
the point is that it _shouldn't_ be mentioned, it's hard to say what the
right match would be (e.g., would there be a leading space?).
Instead, let's just choose a match that is much less likely to appear.
The actual content of the header isn't important, since it's supposed to
be ignored.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you do something like this:
rm file_a
echo change >file_b
git jump diff
then we'll generate two quickfix entries for the diff, one for each
file. But the one for the deleted file is rather pointless. There's no
content to show since the file is gone, and in fact we open the editor
with the path /dev/null!
In vim, at least, the result is a confusing annoyance: the editor opens
with an empty buffer, and you have to skip past it to the useful
quickfix entry (after scratching your head and figuring out that no,
nothing is broken).
Let's skip such entries entirely. There's nothing useful to show, since
the point is that the file has been deleted.
It is possible that you could be doing a diff whose post-image is not
the working tree, and then you'd perhaps be jumping to the deleted
content (or at least something that was in the same spot). But I don't
think it's worth worrying about that case. For one thing, using git-jump
for such diffs is a bad idea in general, as it's going to sometimes move
you to the wrong spot. And two, a deletion is always going to have one
hunk starting at line 1, which is not that interesting to jump to in the
first place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
