Update the way rename() emulation on Windows handle directories to
correct an earlier attempt to do the same.
* js/mingw-rename-fix:
mingw_rename: do support directory renames
Revert recent changes to the way windows environment is set up for
GitHub CI.
* js/github-windows-setup-fix:
GitHub ci(windows): speed up initializing Git for Windows' minimal SDK again
Build fixes for Windows.
* js/ps-build-cmake-fixup:
cmake/vcxproj: stop special-casing `remote-ext`
cmake: put the Perl modules into the correct location again
cmake: use the correct file name for the Perl header
cmake(mergetools): better support for out-of-tree builds
cmake: better support for out-of-tree builds follow-up
Regression fix for 'show-index' when run outside of a repository.
* as/show-index-uninitialized-hash:
t5300: add test for 'show-index --object-format'
show-index: fix uninitialized hash function
Start working to make the codebase buildable with -Wsign-compare.
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
Reftable backend adds check for upper limit of log's update_index.
* kn/reftable-writer-log-write-verify:
reftable/writer: ensure valid range for log's update_index
GitLab CI updates.
* ps/ci-gitlab-update:
ci/lib: fix "CI setup" sections with GitLab CI
ci/lib: do not interpret escape sequences in `group ()` arguments
ci/lib: remove duplicate trap to end "CI setup" group
gitlab-ci: update macOS images to Sonoma
Recent reftable updates mistook a NULL return from a request for
0-byte allocation as OOM and died unnecessarily, which has been
corrected.
* ps/reftable-alloc-failures-zalloc-fix:
reftable/basics: return NULL on zero-sized allocations
reftable/stack: fix zero-sized allocation when there are no readers
reftable/merged: fix zero-sized allocation when there are no readers
reftable/stack: don't perform auto-compaction with less than two tables
In the preceding commits we have fixed a couple of issues when
allocating zero-sized objects. These issues were masked by
implementation-defined behaviour. Quoting malloc(3p):
If size is 0, either:
* A null pointer shall be returned and errno may be set to an
implementation-defined value, or
* A pointer to the allocated space shall be returned. The
application shall ensure that the pointer is not used to access an
object.
So it is perfectly valid that implementations of this function may or
may not return a NULL pointer in such a case.
Adapt both `reftable_malloc()` and `reftable_realloc()` so that they
return NULL pointers on zero-sized allocations. This should remove any
implementation-defined behaviour in our allocators and thus allows us to
detect such platform-specific issues more easily going forward.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar as the preceding commit, we may try to do a zero-sized
allocation when reloading a reftable stack that ain't got any tables.
It is implementation-defined whether malloc(3p) returns a NULL pointer
in that case or a zero-sized object. In case it does return a NULL
pointer though it causes us to think we have run into an out-of-memory
situation, and thus we return an error.
Fix this by only allocating arrays when they have at least one entry.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was reported [1] that Git started to fail with an out-of-memory error
when initializing repositories with the reftable backend on NonStop
platforms. A bisect led to 802c0646ac (reftable/merged: handle
allocation failures in `merged_table_init_iter()`, 2024-10-02), which
changed how we allocate memory when initializing a merged table.
The root cause of this seems to be that NonStop returns a `NULL` pointer
when doing a zero-sized allocation. This would've already happened
before the above change, but we never noticed because we did not check
the result. Now we do notice and thus return an out-of-memory error to
the caller.
Fix the issue by skipping the allocation altogether in case there are no
readers.
[1]: <00ad01db5017$aa9ce340$ffd6a9c0$@nexbridge.com>
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to compact tables we need at least two tables. Bail out early
from `reftable_stack_auto_compact()` in case we have less than two
tables.
In the original, `stack_table_sizes_for_compaction()` yields an array
that has the same length as the number of tables. This array is then
passed on to `suggest_compaction_segment()`, which returns an empty
segment in case we have less than two tables. The segment is then passed
to `segment_size()`, which will return `0` because both start and end of
the segment are `0`. And because we only call `stack_compact_range()` in
case we have a positive segment size we don't perform auto-compaction at
all. Consequently, this change does not result in a user-visible change
in behaviour when called with a single table.
But when called with no tables this protects us against a potential
out-of-memory error: `stack_table_sizes_for_compaction()` would try to
allocate a zero-byte object when there aren't any tables, and that may
lead to a `NULL` pointer on some platforms like NonStop which causes us
to bail out with an out-of-memory error.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bundle create" with an annotated tag on the positive end of
the revision range had a workaround code for older limitation in
the revision walker, which has become unnecessary.
* tc/bundle-with-tag-remove-workaround:
bundle: remove unneeded code
"git fetch" honors "remote.<remote>.followRemoteHEAD" settings to
tweak the remote-tracking HEAD in "refs/remotes/<remote>/HEAD".
* bf/fetch-set-head-config:
remote set-head: set followRemoteHEAD to "warn" if "always"
fetch set_head: add warn-if-not-$branch option
fetch set_head: move warn advice into advise_if_enabled
fetch: add configuration for set_head behaviour
"git fetch" from a configured remote learned to update a missing
remote-tracking HEAD but it asked the remote about their HEAD even
when it did not need to, which has been corrected. Incidentally,
this also corrects "git fetch --tags $URL" which was broken by the
new feature in an unspecified way.
* jc/set-head-symref-fix:
fetch: do not ask for HEAD unnecessarily
When "git fetch $remote" notices that refs/remotes/$remote/HEAD is
missing and discovers what branch the other side points with its
HEAD, refs/remotes/$remote/HEAD is updated to point to it.
* bf/set-head-symref:
fetch set_head: handle mirrored bare repositories
fetch: set remote/HEAD if it does not exist
refs: add create_only option to refs_update_symref_extended
refs: add TRANSACTION_CREATE_EXISTS error
remote set-head: better output for --auto
remote set-head: refactor for readability
refs: atomically record overwritten ref in update_symref
refs: standardize output of refs_read_symbolic_ref
t/t5505-remote: test failure of set-head
t/t5505-remote: set default branch to main
* 'master' of https://github.com/j6t/gitk:
gitk: offer "Copy commit ID to X11 selection" only on X11
gitk: support auto-copy comit ID to primary clipboard
gitk: prefs dialog: refine Auto-select UI
gitk: UI text: change "SHA1 ID" to "Commit ID"
gitk: add text wrapping preferences
gitk: make headings of preferences bold
gitk: check main window visibility before waiting for it to show
gitk: sv.po: Update Swedish translation (323t)
* ah/commit-id-to-clipboard:
gitk: offer "Copy commit ID to X11 selection" only on X11
gitk: support auto-copy comit ID to primary clipboard
gitk: prefs dialog: refine Auto-select UI
gitk: UI text: change "SHA1 ID" to "Commit ID"
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
When the `vcxproj` target was introduced in `config.mak.uname` to allow
building Git with the Visual C toolchain, the `git remote-ext` command
was always executed in its dashed form. Therefore, it was impossible to
pass the test suite unless that command existed in its dashed form, and
we had to special-case this.
Later, when the `vcxproj` target got out of fashion because Visual
Studio gained native support for CMake builds, this special-casing was
copied without questioning it.
But as of 675df192c5 (transport-helper: do not run git-remote-ext etc.
in dashed form, 2020-08-26), the reason for this special-casing no
longer exists. So let's just drop it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ccfba9e0c4 (Makefile: use "generate-perl.sh" to massage Perl
library, 2024-12-06), the previous strategy (which avoided spawning a
shell script to transform the files) was replaced by the same
`generate-perl.sh` invocation as for the Makefile-based build.
The only difference is that now the transformation tries to handle the
Perl modules in-place (which ends up in empty files because the same
file is used as input and output via stdin/stdout redirection), and the
Perl script cannot find them anymore because they are not in the
expected place.
Let's put them into the expected place again, i.e. into
`perl/build/lib/` instead of `perl/`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e4b488049a (Makefile: extract script to massage Perl scripts,
2024-12-06), the code was refactored that is used to transform the Perl
scripts/modules to their final form.
Even the CMake-based build was adjusted, but the change used the file
name `PERL-HEADER` instead of the file name used by the Makefile-based
build (same name but with the `GIT-` prefix). Let's adjust the former to
the latter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7e0730c8ba (t: better support for out-of-tree builds, 2024-12-06)
the strategy was changed from letting `t7609-mergetool--lib.sh`
hard-code the directory where it expects to find the merge tools to
hard-coding that value in the placeholder `@GIT_TEST_MERGE_TOOLS_DIR@`
that is replaced during the build.
However, likely due to a copy/paste mistake (and reviewers missed this,
too), the CMake-based build was adjusted incorrectly, replacing that
placeholder not with the path to the merge tools, but with a Boolean
indicating whether to use a runtime-generated path prefix or not.
Let's fix that, addressing this CMake-build's symptom:
Initialized empty Git repository in D:/a/git/git/t/trash directory.t7609-mergetool--lib/.git/
++ . true/vimdiff
./test-lib.sh: line 1021: true/vimdiff: No such file or directory
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7e0730c8ba (t: better support for out-of-tree builds, 2024-12-06),
the `bin-wrappers/` strategy was changed so that it no longer hard-codes
the template directory to be `@BUILD_DIR@/templates/blt`, but instead
interpolates the `@TEMPLATE_DIR@` placeholder during the build.
However, this commit only adjusted the `Makefile`-based build.
Let's adjust the CMake-based build as well. This fixes t0000.15 which
would otherwise fail with:
++ echo ''\''t1234-verbose/err'\'' is not empty, it contains:'
't1234-verbose/err' is not empty, it contains:
++ cat t1234-verbose/err
warning: templates not found in @TEMPLATE_DIR@
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be the case that initializing the minimal SDK (i.e. a
radically slimmed-down subset of Git for Windows' development
environment intended to perform the CI builds and little else) took
a bit over one minute, would then be cached, and subsequent jobs would
take at most half a dozen seconds to initialize said minimal SDK.
It is important that this step is fast because we have to run the test
suite in parallel, in a set of matrix jobs, to offset the slowness of
the shell-based test suite, and each and every job has to initialize the
very same minimal SDK.
While it may sound as if parallelizing the jobs might only waste the
generously-provided build minutes but at least the _wallclock_ time
would pass quick, in reality it matters a lot: Frequently Git for
Windows' or GitGitGadget PRs get stuck waiting for quite a while before
CI builds start because other PRs' builds still spend substantial
amounts of time to run, blocking due to the concurrency limit being
reached.
Since 91839a8827 (ci: create script to set up Git for Windows SDK,
2024-10-09), the situation has worsened: every job that requires the
minimal Git for Windows SDK spends roughly two-and-a-half minutes doing
so.
With the switch away from the GitHub Action `setup-git-for-windows-sdk`,
we incurred more downsides:
- It is no longer possible for said Action to fix problems independently
from the Git repository, e.g. when new rules about GitHub Actions
require changes in the way the minimal SDK is initialized.
- The minimal SDK was installed specifically outside of the worktree so
as not to clutter it nor incur an additional cost to verify that the
worktree is clean.
Therefore, even if it would be nice to have a shared process between
GitHub and GitLab based CI builds, let's switch the GitHub-based CI back
to the tried-and-tested `setup-git-for-windows-sdk` Action.
This commit partially reverts 91839a8827 (ci: create script to set up
Git for Windows SDK, 2024-10-09).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 391bceae43 (compat/mingw: support POSIX semantics for atomic
renames, 2024-10-27), we taught the `mingw_rename()` function to respect
POSIX semantics, but we did so only as a fallback after `_wrename()`
fails.
This hid a bug in the implementation that was not caught by Git's test
suite: The `CreateFileW()` function _can_ open handles to directories,
but not when asked to use the `FILE_ATTRIBUTE_NORMAL` flag, as that flag
only is allowed for files.
Let's fix this by using the common `FILE_FLAG_BACKUP_SEMANTICS` flag
that can be used for opening handles to directories, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build procedure update plus introduction of Meson based builds.
* ps/build: (24 commits)
Introduce support for the Meson build system
Documentation: add comparison of build systems
t: allow overriding build dir
t: better support for out-of-tree builds
Documentation: extract script to generate a list of mergetools
Documentation: teach "cmd-list.perl" about out-of-tree builds
Documentation: allow sourcing generated includes from separate dir
Makefile: simplify building of templates
Makefile: write absolute program path into bin-wrappers
Makefile: allow "bin-wrappers/" directory to exist
Makefile: refactor generators to be PWD-independent
Makefile: extract script to generate gitweb.js
Makefile: extract script to generate gitweb.cgi
Makefile: extract script to massage Python scripts
Makefile: extract script to massage Shell scripts
Makefile: use "generate-perl.sh" to massage Perl library
Makefile: extract script to massage Perl scripts
Makefile: consistently use PERL_PATH
Makefile: generate doc versions via GIT-VERSION-GEN
Makefile: generate "git.rc" via GIT-VERSION-GEN
...
Fix performance regression of a recent "fatten promisor pack with
local objects" protection against an unwanted gc.
* jt/fix-fattening-promisor-fetch:
index-pack --promisor: also check commits' trees
index-pack --promisor: don't check blobs
index-pack --promisor: dedup before checking links
The syntax ":/<text>" to name the latest commit with the matching
text was broken with a recent change, which has been corrected.
* ps/commit-with-message-syntax-fix:
object-name: fix reversed ordering with ":/<text>" revisions
The advice messages now tell the newer 'git config set' command to
set the advice.token configuration variable to squelch a message.
* bf/explicit-config-set-in-advice-messages:
advice: suggest using subcommand "git config set"
"git tag" has been taught to refuse to create refs/tags/HEAD
as such a tag will be confusing in the context of UI provided by
the Git Porcelain commands.
* jc/forbid-head-as-tagname:
tag: "git tag" refuses to use HEAD as a tagname
t5604: do not expect that HEAD can be a valid tagname
refs: drop strbuf_ prefix from helpers
refs: move ref name helpers around
"git describe" optimization.
* jk/describe-perf:
describe: split "found all tags" and max_candidates logic
describe: stop traversing when we run out of names
describe: stop digging for max_candidates+1
t/perf: add tests for git-describe
t6120: demonstrate weakness in disjoint-root handling
This option is only useful where a selection clipboard is available, which
is only the case on X11. Do not clutter the UI in other environments.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
The --ancestry-path option is designed to be given a commit that is
on the path, which was not documented, which has been corrected.
* kk/doc-ancestry-path:
doc: mention rev-list --ancestry-path restrictions
Yet another "pass the repository through the callchain" topic.
* kn/midx-wo-the-repository:
midx: inline the `MIDX_MIN_SIZE` definition
midx: pass down `hash_algo` to functions using global variables
midx: pass `repository` to `load_multi_pack_index`
midx: cleanup internal usage of `the_repository` and `the_hash_algo`
midx-write: pass down repository to `write_midx_file[_only]`
write-midx: add repository field to `write_midx_context`
midx-write: use `revs->repo` inside `read_refs_snapshot`
midx-write: pass down repository to static functions
packfile.c: remove unnecessary prepare_packed_git() call
midx: add repository to `multi_pack_index` struct
config: make `packed_git_(limit|window_size)` non-global variables
config: make `delta_base_cache_limit` a non-global variable
packfile: pass down repository to `for_each_packed_object`
packfile: pass down repository to `has_object[_kept]_pack`
packfile: pass down repository to `odb_pack_name`
packfile: pass `repository` to static function in the file
packfile: use `repository` from `packed_git` directly
packfile: add repository to struct `packed_git`
Backport oss-fuzz tests for us to our codebase.
* es/oss-fuzz:
fuzz: port fuzz-url-decode-mem from OSS-Fuzz
fuzz: port fuzz-parse-attr-line from OSS-Fuzz
fuzz: port fuzz-credential-from-url-gently from OSS-Fuzz
"git fast-import" learned to reject paths with ".." and "." as
their components to avoid creating invalid tree objects.
* en/fast-import-verify-path:
t9300: test verification of renamed paths
fast-import: disallow more path components
fast-import: disallow "." and ".." path components
"git bundle --unbundle" and "git clone" running on a bundle file
both learned to trigger fsck over the new objects with configurable
fck check levels.
* jt/bundle-fsck:
transport: propagate fsck configuration during bundle fetch
fetch-pack: split out fsck config parsing
bundle: support fsck message configuration
bundle: add bundle verification options type
To show a remerge diff, the merge needs to be recreated. For that to
work, the merge base(s) need to be found, which means that the commits'
parents have to be traversed until common ancestors are found (if any).
However, one optimization that hails all the way back to cb115748ec
(Some more memory leak avoidance, 2006-06-17) is to release the commit's
list of parents immediately after showing it _and to set that parent
list to `NULL`_. This can break the merge base computation.
This problem is most obvious when traversing the commits in reverse: In
that instance, if a parent of a merge commit has been shown as part of
the `git log` command, by the time the merge commit's diff needs to be
computed, that parent commit's list of parent commits will have been set
to `NULL` and as a result no merge base will be found (even if one
should be found).
Traversing commits in reverse is far from the only circumstance in which
this problem occurs, though. There are many avenues to traversing at
least one commit in the revision walk that will later be part of a merge
base computation, for example when not even walking any revisions in
`git show <merge1> <merge2>` where `<merge1>` is part of the commit
graph between the parents of `<merge2>`.
Another way to force a scenario where a commit is traversed before it
has to be traversed again as part of a merge base computation is to
start with two revisions (where the first one is reachable from the
second but not in a first-parent ancestry) and show the commit log with
`--topo-order` and `--first-parent`.
Let's fix this by special-casing the `remerge_diff` mode, similar to
what we did with reflogs in f35650dff6 (log: do not free parents when
walking reflog, 2017-07-07).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Auto-select ("Copy commit ID to X11 selection") is useful when a
selection cliboard exists, but otherwise generally meaningless, for
instance on Windows.
Add a similar pref and behavior which copies the commit ID to the
primary clipboard - for platforms without a selection clipboard, but
which can also be useful additionally on platforms with selection.
Note that while autoselect is enabled by default, autocopy isn't.
That's because the selection clipboard is typically dispensable, while
the primary clipboard can be considered a more precious resource,
which we don't want to (clear and) overwrite by default.
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
Tl;DR: change Auto-select text, move the length input to a new line.
The Auto-select preference auto-selects [part of] the commit ID text
at the respective widget on startup, and when the current commit at
the graph changes.
Its real premise, however, is to populate the selection clipboard
with the commit ID. Consider, for instance, how meaningless it is on
platforms without a selection clipboard - like Windows or macOS (on
Windows the selection is not even visible with the default Tk theme,
because it's only visible in focused widgets - which the commit ID
widget is not during normal application of this selection).
So rename the Auto-select label to "Copy commit ID to X11 selection",
to reflect better the ultimate outcome of its application
Note that there exists other, non-X11 platforms with a selection
clipboard, like Wayland, and if a native Tk client exists on such
platforms, then the description will not be accurate, but hopefully
it's not too misleading either.
Additionally, move the length input widget to a new line, because:
- This length applies to both Auto-select and "Copy commit reference"
context menu item, so it's not exclusive to the selection length.
- The next commit will add support for primary clipboard as well,
where this length will also be used.
Also, move the "Hide remotes" item above these selection prefs, to
keep the selection prefs semi-grouped before the spacing of the
following title "Diff display options".
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
