The table iterator has to iterate towards the next block once it has
yielded all records of the current block. This is done by creating a new
table iterator, initializing it to the next block, releasing the old
iterator and then copying over the data.
Refactor the code to instead advance the table iterator in place. This
is simpler and unlocks some optimizations in subsequent patches. Also,
it allows us to avoid some allocations.
The following measurements show a single matching ref out of 1 million
refs. Before this change:
HEAP SUMMARY:
in use at exit: 13,603 bytes in 125 blocks
total heap usage: 7,235 allocs, 7,110 frees, 301,481 bytes allocated
After:
HEAP SUMMARY:
in use at exit: 13,603 bytes in 125 blocks
total heap usage: 315 allocs, 190 frees, 107,027 bytes allocated
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The table iterator allows the caller to iterate through all records in a
reftable table. To do so it iterates through all blocks of the desired
type one by one, where for each block it creates a new block iterator
and yields all its entries.
One of the things that is somewhat confusing in this context is who owns
the block reader that is being used to read the blocks and pass them to
the block iterator. Intuitively, as the table iterator is responsible
for iterating through the blocks, one would assume that this iterator is
also responsible for managing the lifecycle of the reader. And while it
somewhat is, the block reader is ultimately stored inside of the block
iterator.
Refactor the code such that the block reader is instead fully managed by
the table iterator. Instead of passing the reader to the block iterator,
we now only end up passing the block data to it. Despite clearing up the
lifecycle of the reader, it will also allow for better reuse of the
reader in subsequent patches.
The following benchmark prints a single matching ref out of 1 million
refs. Before:
HEAP SUMMARY:
in use at exit: 13,603 bytes in 125 blocks
total heap usage: 6,607 allocs, 6,482 frees, 509,635 bytes allocated
After:
HEAP SUMMARY:
in use at exit: 13,603 bytes in 125 blocks
total heap usage: 7,235 allocs, 7,110 frees, 301,481 bytes allocated
Note that while there are more allocation and free calls now, the
overall number of bytes allocated is significantly lower. The number of
allocations will be reduced significantly by the next patch though.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new function `block_reader_release()` that releases
resources acquired by the block reader. This function will be extended
in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function definitions and declaration of `struct block_reader` and
`struct block_iter` are somewhat mixed up, making it hard to see which
functions belong together. Rearrange them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `block_iter_seek()` is merely a simple wrapper around
`block_reader_seek()`. Merge those two functions into a new function
`block_iter_seek_key()` that more clearly says what it is actually
doing.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `block_reader_start()` does not really apply to the block
reader, but to the block iterator. It's name is thus somewhat confusing.
Rename it to `block_iter_seek_start()` to clarify.
We will rename `block_reader_seek()` in similar spirit in the next
commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up by splitting code responsible for writing midx files
into its own file.
* tb/midx-write:
midx-write.c: use `--stdin-packs` when repacking
midx-write.c: check count of packs to repack after grouping
midx-write.c: factor out common want_included_pack() routine
midx-write: move writing-related functions from midx.c
t-prio-queue test has been cleaned up by using C99 compound
literals; this is meant to also serve as a weather-balloon to smoke
out folks with compilers who have trouble compiling code that uses
the feature.
* rs/t-prio-queue-cleanup:
t-prio-queue: simplify using compound literals
Reftable code clean-up and some bugfixes.
* ps/reftable-binsearch-updates:
reftable/block: avoid decoding keys when searching restart points
reftable/record: extract function to decode key lengths
reftable/block: fix error handling when searching restart points
reftable/block: refactor binary search over restart points
reftable/refname: refactor binary search over refnames
reftable/basics: improve `binsearch()` test
reftable/basics: fix return type of `binsearch()` to be `size_t`
"git checkout/switch --detach foo", after switching to the detached
HEAD state, gave the tracking information for the 'foo' branch,
which was pointless.
Tested-by: M Hickford <mirth.hickford@gmail.com>
cf. <CAGJzqsmE9FDEBn=u3ge4LA3ha4fDbm4OWiuUbMaztwjELBd7ug@mail.gmail.com>
* jc/checkout-detach-wo-tracking-report:
checkout: omit "tracking" information on a detached HEAD
Match the option argument type in the help text to the correct type
updated by a recent series.
* js/merge-tree-3-trees:
merge-tree: fix argument type of the `--merge-base` option
In 5f43cf5b2e (merge-tree: accept 3 trees as arguments, 2024-01-28), I
taught `git merge-tree` to perform three-way merges on trees. This
commit even changed the manual page to state that the `--merge-base`
option takes a tree-ish rather than requiring a commit.
But I forgot to adjust the in-program help text. This patch fixes that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc update, as a preparation to enhance "git update-ref --stdin".
* kn/clarify-update-ref-doc:
githooks: use {old,new}-oid instead of {old,new}-value
update-ref: use {old,new}-oid instead of {old,new}value
Another "set -u" fix for the bash prompt (in contrib/) script.
* vs/complete-with-set-u-fix:
completion: protect prompt against unset SHOWUPSTREAM in nounset mode
completion: fix prompt with unset SHOWCONFLICTSTATE in nounset mode
Use advice_if_enabled() API to rewrite a simple pattern to
call advise() after checking advice_enabled().
* rj/use-adv-if-enabled:
add: use advise_if_enabled for ADVICE_ADD_EMBEDDED_REPO
add: use advise_if_enabled for ADVICE_ADD_EMPTY_PATHSPEC
add: use advise_if_enabled for ADVICE_ADD_IGNORED_FILE
"git pack-refs" learned the "--auto" option, which is a useful
addition to be triggered from "git gc --auto".
Acked-by: Karthik Nayak <karthik.188@gmail.com>
cf. <CAOLa=ZRAEA7rSUoYL0h-2qfEELdbPHbeGpgBJRqesyhHi9Q6WQ@mail.gmail.com>
* ps/pack-refs-auto:
builtin/gc: pack refs when using `git maintenance run --auto`
builtin/gc: forward git-gc(1)'s `--auto` flag when packing refs
t6500: extract objects with "17" prefix
builtin/gc: move `struct maintenance_run_opts`
builtin/pack-refs: introduce new "--auto" flag
builtin/pack-refs: release allocated memory
refs/reftable: expose auto compaction via new flag
refs: remove `PACK_REFS_ALL` flag
refs: move `struct pack_refs_opts` to where it's used
t/helper: drop pack-refs wrapper
refs/reftable: print errors on compaction failure
reftable/stack: gracefully handle failed auto-compaction due to locks
reftable/stack: use error codes when locking fails during compaction
reftable/error: discern locked/outdated errors
reftable/stack: fix error handling in `reftable_stack_init_addition()`
The test script had an incomplete and ineffective attempt to avoid
clobbering the testing user's real crontab (and its equivalents),
which has been completed.
* es/test-cron-safety:
test-lib: fix non-functioning GIT_TEST_MAINT_SCHEDULER fallback
"git add -p" and other "interactive hunk selection" UI has learned to
skip showing the hunk immediately after it has already been shown, and
an additional action to explicitly ask to reshow the current hunk.
* rj/add-p-explicit-reshow:
add-patch: do not print hunks repeatedly
add-patch: introduce 'p' in interactive-patch
Documentation rules has been explicitly described how to mark-up
literal parts and a few manual pages have been updated as examples.
* ja/doc-markup-updates:
doc: git-clone: do not autoreference the manpage in itself
doc: git-clone: apply new documentation formatting guidelines
doc: git-init: apply new documentation formatting guidelines
doc: allow literal and emphasis format in doc vs help tests
doc: rework CodingGuidelines with new formatting rules
The "hint:" messages given by the advice mechanism, when given a
message with a blank line, left a line with trailing whitespace,
which has been cleansed.
* jc/advice-sans-trailing-whitespace:
advice: omit trailing whitespace
"git apply" failed to extract the filename the patch applied to,
when the change was about an empty file created in or deleted from
a directory whose name ends with a SP, which has been corrected.
* jc/apply-parse-diff-git-header-names-fix:
t4126: fix "funny directory name" test on Windows (again)
t4126: make sure a directory with SP at the end is usable
apply: parse names out of "diff --git" more carefully
core.commentChar used to be limited to a single byte, but has been
updated to allow an arbitrary multi-byte sequence.
* jk/core-comment-string:
config: add core.commentString
config: allow multi-byte core.commentChar
environment: drop comment_line_char compatibility macro
wt-status: drop custom comment-char stringification
sequencer: handle multi-byte comment characters when writing todo list
find multi-byte comment chars in unterminated buffers
find multi-byte comment chars in NUL-terminated strings
prefer comment_line_str to comment_line_char for printing
strbuf: accept a comment string for strbuf_add_commented_lines()
strbuf: accept a comment string for strbuf_commented_addf()
strbuf: accept a comment string for strbuf_stripspace()
environment: store comment_line_char as a string
strbuf: avoid shadowing global comment_line_char name
commit: refactor base-case of adjust_comment_line_char()
strbuf: avoid static variables in strbuf_add_commented_lines()
strbuf: simplify comment-handling in add_lines() helper
config: forbid newline as core.commentChar
"git config" learned "--comment=<message>" option to leave a
comment immediately after the "variable = value" on the same line
in the configuration file.
* rs/config-comment:
config: allow tweaking whitespace between value and comment
config: fix --comment formatting
config: add --comment option to add a comment
Allow git-cherry-pick(1) to automatically drop redundant commits via
a new `--empty` option, similar to the `--empty` options for
git-rebase(1) and git-am(1). Includes a soft deprecation of
`--keep-redundant-commits` as well as some related docs changes and
sequencer code cleanup.
* bl/cherry-pick-empty:
cherry-pick: add `--empty` for more robust redundant commit handling
cherry-pick: enforce `--keep-redundant-commits` incompatibility
sequencer: do not require `allow_empty` for redundant commit options
sequencer: handle unborn branch with `--allow-empty`
rebase: update `--empty=ask` to `--empty=stop`
docs: clean up `--empty` formatting in git-rebase(1) and git-am(1)
docs: address inaccurate `--empty` default with `--exec`
The "--pretty=<shortHand>" option of the commands in the "git log"
family, defined as "[pretty] shortHand = <expansion>" should have
been looked up case insensitively, but was not, which has been
corrected.
* bl/pretty-shorthand-config-fix:
pretty: find pretty formats case-insensitively
pretty: update tests to use `test_config`
The t/README file now gives a hint on running individual tests in
the "t/" directory with "make t<num>-*.sh t<num>-*.sh".
* pb/test-scripts-are-build-targets:
t/README: mention test files are make targets
Documentation updates.
* ds/grep-doc-updates:
grep docs: describe --no-index further and improve formatting a bit
grep docs: describe --recurse-submodules further and improve formatting a bit
Introduce an experimental protocol for contributors to propose the
topic description to be used in the "What's cooking" report, the
merge commit message for the topic, and in the release notes and
document it in the SubmittingPatches document.
* jc/release-notes-entry-experiment:
SubmittingPatches: release-notes entry experiment
The implementation and documentation of "object-format" option
exchange between the Git itself and its remote helpers did not
quite match, which has been corrected.
* jk/remote-helper-object-format-option-fix:
transport-helper: send "true" value for object-format option
transport-helper: drop "object-format <algo>" option
transport-helper: use write helpers more consistently
When searching over restart points in a block we decode the key of each
of the records, which results in a memory allocation. This is quite
pointless though given that records it restart points will never use
prefix compression and thus store their keys verbatim in the block.
Refactor the code so that we can avoid decoding the keys, which saves us
some allocations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're about to refactor the binary search over restart points so that it
does not need to fully decode the record keys anymore. To do so we will
need to decode the record key lengths, which is non-trivial logic.
Extract the logic to decode these lengths from `refatble_decode_key()`
so that we can reuse it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing the binary search over restart points in a block we need to
decode the record keys. This decoding step can result in an error when
the block is corrupted, which we indicate to the caller of the binary
search by setting `args.error = 1`. But the only caller that exists
mishandles this because it in fact performs the error check before
calling `binsearch()`.
Fix this bug by checking for errors at the right point in time.
Furthermore, refactor `binsearch()` so that it aborts the search in case
the callback function returns a negative value so that we don't
needlessly continue to search the block.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When seeking a record in our block reader we perform a binary search
over the block's restart points so that we don't have to do a linear
scan over the whole block. The logic to do so is quite intricate though,
which makes it hard to understand.
Improve documentation and rename some of the functions and variables so
that the code becomes easier to understand overall. This refactoring
should not result in any change in behaviour.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is comparatively hard to understand how exactly the binary search
over refnames works given that the function and variable names are not
exactly easy to grasp. Rename them to make this more obvious. This
should not result in any change in behaviour.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `binsearch()` test is somewhat weird in that it doesn't explicitly
spell out its expectations. Instead it does so in a rather ad-hoc way
with some hard-to-understand computations.
Refactor the test to spell out the needle as well as expected index for
all testcases. This refactoring highlights that the `binsearch_func()`
is written somewhat weirdly to find the first integer smaller than the
needle, not smaller or equal to it. Adjust the function accordingly.
While at it, rename the callback function to better convey its meaning.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `binsearch()` function can be used to find the first element for
which a callback functions returns a truish value. But while the array
size is of type `size_t`, the function in fact returns an `int` that is
supposed to index into that array.
Fix the function signature to return a `size_t`. This conversion does
not change any semantics given that the function would only ever return
a value in the range `[0, sz]` anyway.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
