In general, we'd like to make sure Git works on the LTS versions of
major Linux distributions. To do that, let's add CI jobs for the oldest
regular (non-extended) LTS versions of the major distributions: Ubuntu
20.04, Debian 11, and RHEL 8. Because RHEL isn't available to the
public at no charge, use AlmaLinux, which is binary compatible with it.
Note that Debian does not offer the language-pack packages, but suitable
locale support can be installed with the locales-all package.
Otherwise, use the set of installation instructions which exist and are
most similar to the existing supported distros.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We're no longer testing this version and it's well beyond regular LTS
support now, so remove the stanza for it from the case statement in our
CI code.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Ubuntu 16.04 is past its normal LTS lifespan, so let's switch to Ubuntu
20.04 instead, which is the latest regular LTS version.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Avoid losing exit status by having Git command being tested on the
upstream side of a pipe.
* co/t6050-pipefix:
t6050: avoid pipes with upstream Git commands
Teaches the ref-filter machinery to recognize and avoid cases where
sorting would be redundant.
* ps/ref-filter-sort:
ref-filter: format iteratively with lexicographic refname sorting
Implements a new reftable-specific strbuf replacement to reduce
reftable's dependency on Git-specific data structures.
* ps/reftable-strbuf:
reftable: handle trivial `reftable_buf` errors
reftable/stack: adapt `stack_filename()` to handle allocation failures
reftable/record: adapt `reftable_record_key()` to handle allocation failures
reftable/stack: adapt `format_name()` to handle allocation failures
t/unit-tests: check for `reftable_buf` allocation errors
reftable/blocksource: adapt interface name
reftable: convert from `strbuf` to `reftable_buf`
reftable/basics: provide new `reftable_buf` interface
reftable: stop using `strbuf_addf()`
reftable: stop using `strbuf_addbuf()`
Teaches 'shortlog' to explicitly use SHA-1 when operating outside of
a repository.
* wm/shortlog-hash:
builtin/shortlog: explicitly set hash algo when there is no repo
Commands that can also work outside Git have learned to take the
repository instance "repo" when we know we are in a repository, and
NULL when we are not, in a parameter. The uses of the_repository
variable in a few of them have been removed using the new calling
convention.
* jc/a-commands-without-the-repo:
archive: remove the_repository global variable
annotate: remove usage of the_repository global
git: pass in repo to builtin based on setup_git_directory_gently
Enable Windows-based CI in GitLab.
* ps/ci-gitlab-windows:
gitlab-ci: exercise Git on Windows
gitlab-ci: introduce stages and dependencies
ci: handle Windows-based CI jobs in GitLab CI
ci: create script to set up Git for Windows SDK
t7300: work around platform-specific behaviour with long paths on MinGW
A "git fetch" from the superproject going down to a submodule used
a wrong remote when the default remote names are set differently
between them.
* db/submodule-fetch-with-remote-name-fix:
submodule: correct remote name with fetch
This change updates the script to conform to the coding standards
outlined in the Git project's documentation. According to the guidelines
in Documentation/CodingGuidelines under "Redirection operators", there
should be no whitespace after redirection operators.
Signed-off-by: Seyi Kuforiji <kuforiji98@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
An extra worktree attached to a repository points at each other to
allow finding the repository from the worktree and vice versa
possible. Turn this linkage to relative paths.
* cw/worktree-relative:
worktree: add test for path handling in linked worktrees
worktree: link worktrees with relative paths
worktree: refactor infer_backlink() to use *strbuf
worktree: repair copied repository and linked worktrees
Fail gracefully instead of crashing when attempting to write the
contents of a corrupt in-core index as a tree object.
* ps/cache-tree-w-broken-index-entry:
unpack-trees: detect mismatching number of cache-tree/index entries
cache-tree: detect mismatching number of index entries
cache-tree: refactor verification to return error codes
In pipes, the exit code of a chain of commands is determined by
the final command. In order not to miss the exit code of a failed
Git command, avoid pipes instead write output of Git commands
into a file.
For better debugging experience, instances of "grep" were changed
to "test_grep". "test_grep" provides more context in case of a
failed "grep".
Signed-off-by: Chizoba ODINAKA <chizobajames21@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Correct "expected" to rightly terminate with NUL ie '\0' instead of '0'
which may have been typoed.
We didn't notice this before because the test is run with
"test_expect_failure", meaning the test would have been marked broken
anyways.
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
“Trailer” is the preferred nomenclature in this project. Also add a
definite article where I think it makes sense.
As we can see the rest of the document already prefers this term. This
just gets rid of the last stragglers.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In bd98f9774e (ref-filter.c: filter & format refs in the same callback,
2023-11-14), we have introduced logic into the ref-filter subsystem that
determines whether or not we can output references iteratively instead
of first collecting all references, post-processing them and printing
them once done. This has the advantage that we don't have to store all
refs in memory and, when used with e.g. `--count=1`, that we don't have
to read all refs in the first place.
One restriction we have in place for that is that caller must not ask
for sorted refs, because there is no way to sort the refs without first
reading them all into an array. So the benefits can only be reaped when
explicitly asking for output not to be sorted.
But there is one exception here where we _can_ get away with sorting
refs while streaming: ref backends sort references returned by their
iterators in lexicographic order. So if the following conditions are all
true we can do iterative streaming:
- There must be at most a single sorting specification, as otherwise
we're not using plain lexicographic ordering.
- The sorting specification must use the "refname".
- The sorting specification must not be using any flags, like
case-insensitive sorting.
Now the resulting logic does feel quite fragile overall, which makes me
a bit uneasy. But after thinking about this for a while I couldn't find
any obvious gaps in my reasoning. Furthermore, given that lexicographic
sorting order is the default in git-for-each-ref(1), this is likely to
benefit a whole lot of usecases out there.
The following benchmark executes git-for-each-ref(1) in a crafted repo
with 1 million references:
Benchmark 1: git for-each-ref (revision = HEAD~)
Time (mean ± σ): 6.756 s ± 0.014 s [User: 3.004 s, System: 3.541 s]
Range (min … max): 6.738 s … 6.784 s 10 runs
Benchmark 2: git for-each-ref (revision = HEAD)
Time (mean ± σ): 6.479 s ± 0.017 s [User: 2.858 s, System: 3.422 s]
Range (min … max): 6.450 s … 6.519 s 10 runs
Summary
git for-each-ref (revision = HEAD)
1.04 ± 0.00 times faster than git for-each-ref (revision = HEAD~)
The change results in a slight performance improvement, but nothing that
would really stand out. Something that cannot be seen in the benchmark
though is peak memory usage, which went from 404.5MB to 68.96kB.
A more interesting benchmark is printing a single referenence with
`--count=1`:
Benchmark 1: git for-each-ref --count=1 (revision = HEAD~)
Time (mean ± σ): 6.655 s ± 0.018 s [User: 2.865 s, System: 3.576 s]
Range (min … max): 6.630 s … 6.680 s 10 runs
Benchmark 2: git for-each-ref --count=1 (revision = HEAD)
Time (mean ± σ): 8.6 ms ± 1.3 ms [User: 2.3 ms, System: 6.1 ms]
Range (min … max): 6.7 ms … 14.4 ms 266 runs
Summary
git git for-each-ref --count=1 (revision = HEAD)
770.58 ± 116.19 times faster than git for-each-ref --count=1 (revision = HEAD~)
Whereas we scaled with the number of references before, we now print the
first reference and exit immediately, which provides a massive win.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git maintenance start" crashed due to an uninitialized variable
reference, which has been corrected.
* ps/maintenance-start-crash-fix:
builtin/gc: fix crash when running `git maintenance start`
"git rebase --rebase-merges" now uses branch names as labels when
able.
* ng/rebase-merges-branch-name-as-label:
rebase-merges: try and use branch names as labels
rebase-update-refs: extract load_branch_decorations
load_branch_decorations: fix memory leak with non-static filters
Convert the reftable library such that we handle failures with the
new `reftable_buf` interfaces.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The `stack_filename()` function cannot pass any errors to the caller as it
has a `void` return type. Adapt it and its callers such that we can
handle errors and start handling allocation failures.
There are two interesting edge cases in `reftable_stack_destroy()` and
`reftable_addition_close()`. Both of these are trying to tear down their
respective structures, and while doing so they try to unlink some of the
tables they have been keeping alive. Any earlier attempts to do that may
fail on Windows because it keeps us from deleting such tables while they
are still open, and thus we re-try on close. It's okay and even expected
that this can fail when the tables are still open by another process, so
we handle the allocation failures gracefully and just skip over any file
whose name we couldn't figure out.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The `reftable_record_key()` function cannot pass any errors to the
caller as it has a `void` return type. Adapt it and its callers such
that we can handle errors and start handling allocation failures.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The `format_name()` function cannot pass any errors to the caller as it
has a `void` return type. Adapt it and its callers such that we can
handle errors and start handling allocation failures.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Adapt the name of the `strbuf` block source to no longer relate to this
interface, but instead to the `reftable_buf` interface.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Convert the reftable library to use the `reftable_buf` interface instead
of the `strbuf` interface. This is mostly a mechanical change via sed(1)
with some manual fixes where functions for `strbuf` and `reftable_buf`
differ. The converted code does not yet handle allocation failures. This
will be handled in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Implement a new `reftable_buf` interface that will replace Git's own
`strbuf` interface. This is done due to three reasons:
- The `strbuf` interfaces do not handle memory allocation failures and
instead causes us to die. This is okay in the context of Git, but is
not in the context of the reftable library, which is supposed to be
usable by third-party applications.
- The `strbuf` interface is quite deeply tied into Git, which makes it
hard to use the reftable library as a standalone library. Any
dependent would have to carefully extract the relevant parts of it
to make things work, which is not all that sensible.
- The `strbuf` interface does not use the pluggable allocators that
can be set up via `reftable_set_alloc()`.
So we have good reasons to use our own type, and the implementation is
rather trivial. Implement our own type. Conversion of the reftable
library will be handled in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We're about to introduce our own `reftable_buf` type to replace
`strbuf`. One function we'll have to convert is `strbuf_addf()`, which
is used in a handful of places. This function uses `snprintf()`
internally, which makes porting it a bit more involved:
- It is not available on all platforms.
- Some platforms like Windows have broken implementations.
So by using `snprintf()` we'd also push the burden on downstream users
of the reftable library to make available a properly working version of
it.
Most callsites of `strbuf_addf()` are trivial to convert to not using
it. We do end up using `snprintf()` in our unit tests, but that isn't
much of a problem for downstream users of the reftable library.
While at it, remove a useless call to `strbuf_reset()` in
`t_reftable_stack_auto_compaction_with_locked_tables()`. We don't write
to the buffer before this and initialize it with `STRBUF_INIT`, so there
is no need to reset anything.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We're about to introduce our own `reftable_buf` type to replace
`strbuf`. Get rid of the seldomly-used `strbuf_addbuf()` function such
that we have to reimplement one less function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix typos in documentation, comments, etc.
Via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Whilst git-shortlog(1) does not explicitly need any repository
information when run without reference to one, it still parses some of
its arguments with parse_revision_opt() which assumes that the hash
algorithm is set. However, in c8aed5e8da (repository: stop setting SHA1
as the default object hash, 2024-05-07) we stopped setting up a default
hash algorithm and instead require commands to set it up explicitly.
This was done for most other commands like in ab274909d4 (builtin/diff:
explicitly set hash algo when there is no repo, 2024-05-07) but was
missed for builtin/shortlog, making git-shortlog(1) segfault outside of
a repository when given arguments like --author that trigger a call to
parse_revision_opt().
Fix this for now by explicitly setting the hash algorithm to SHA1. Also
add a regression test for the segfault.
Thanks-to: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
