The t1300 test suite exercises the git-config(1) tool. To do so, the
test overwrites ".git/config" to contain custom contents in several
places with code like the following:
```
cat > .git/config <<\EOF
...
EOF
```
While this is easy enough to do, it may create problems when using a
non-default repository format because this causes us to overwrite the
repository format version as well as any potential extensions. With the
upcoming "reftable" ref backend the result is that Git would try to
access refs via the "files" backend even though the repository has been
initialized with the "reftable" backend, which will cause failures when
trying to access any refs.
Ideally, we would rewrite the whole test suite to not depend on state
written by previous tests, but that would result in a lot of changes in
this test suite. Instead, we only refactor tests which access the refdb
to be more robust by using their own separate repositories, which allows
us to be more careful and not discard required extensions.
Note that we also have to touch up how the CUSTOM_CONFIG_FILE gets
accessed. This environment variable contains the relative path to a
custom config file which we're setting up. But because we are now using
subrepositories, this relative path will not be found anymore because
our working directory changes. This issue is addressed by storing the
absolute path to the file in CUSTOM_CONFIG_FILE instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git sparse-checkout (add|set) --[no-]cone --end-of-options" did
not handle "--end-of-options" correctly after a recent update.
* en/sparse-checkout-eoo:
sparse-checkout: be consistent with end of options markers
"git sparse-checkout set" added default patterns even when the
patterns are being fed from the standard input, which has been
corrected.
* jc/sparse-checkout-set-default-fix:
sparse-checkout: use default patterns for 'set' only !stdin
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
Doc update.
* ml/doc-merge-updates:
Documentation/git-merge.txt: use backticks for command wrapping
Documentation/git-merge.txt: fix reference to synopsis
"git archive --list extra garbage" silently ignored excess command
line parameters, which has been corrected.
* jc/archive-list-with-extra-args:
archive: "--list" does not take further options
Assorted changes around pseudoref handling.
* ps/pseudo-refs:
bisect: consistently write BISECT_EXPECTED_REV via the refdb
refs: complete list of special refs
refs: propagate errno when reading special refs fails
wt-status: read HEAD and ORIG_HEAD via the refdb
Doc updates to clarify what an "unborn branch" means.
* jc/orphan-unborn:
orphan/unborn: fix use of 'orphan' in end-user facing messages
orphan/unborn: add to the glossary and use them consistently
"git status" is taught to show both the branch being bisected and
being rebased when both are in effect at the same time.
* rj/status-bisect-while-rebase:
status: fix branch shown when not only bisecting
Code clean-up.
* la/trailer-cleanups:
trailer: use offsets for trailer_start/trailer_end
trailer: find the end of the log message
commit: ignore_non_trailer computes number of bytes to ignore
Command line completion script (in contrib/) learned to work better
with the reftable backend.
* sh/completion-with-reftable:
completion: support pseudoref existence checks for reftables
completion: refactor existence checks for pseudorefs
Use DIV_ROUND_UP in mem_pool_alloc() to round the allocation length to
the next multiple of GIT_MAX_ALIGNMENT instead of twiddling bits
explicitly. This is shorter and clearer, to the point that we no longer
need the comment that explains what's being calculated.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory pool allocations that require a new block and would fill at
least half of it are handled specially. Before 158dfeff3d (mem-pool:
add life cycle management functions, 2018-07-02) they used to be
allocated outside of the pool. This patch made mem_pool_alloc() create
a bespoke block instead, to allow releasing it when the pool gets
discarded.
Unfortunately mem_pool_alloc() returns a pointer to the start of such a
bespoke block, i.e. to the struct mp_block at its top. When the caller
writes to it, the management information gets corrupted. This affects
mem_pool_discard() and -- if there are no other blocks in the pool --
also mem_pool_alloc().
Return the payload pointer of bespoke blocks, just like for smaller
allocations, to protect the management struct.
Also update next_free to mark the block as full. This is only strictly
necessary for the first allocated block, because subsequent ones are
inserted after the current block and never considered for further
allocations, but it's easier to just do it in all cases.
Add a basic unit test to demonstrate the issue by using
mem_pool_calloc() with a tiny block size, which forces the creation of a
bespoke block.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" has been prepared to allow cloning a repository with
non-default hash function into a repository that uses the reftable
backend.
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
"git fetch --atomic" issued an unnecessary empty error message,
which has been corrected.
* jx/fetch-atomic-error-message-fix:
fetch: no redundant error message for atomic fetch
t5574: test porcelain output of atomic fetch
Doc updates.
* jc/doc-most-refs-are-not-that-special:
docs: MERGE_AUTOSTASH is not that special
docs: AUTO_MERGE is not that special
refs.h: HEAD is not that special
git-bisect.txt: BISECT_HEAD is not that special
git.txt: HEAD is not that special
The code to parse the From e-mail header has been updated to avoid
recursion.
* jk/mailinfo-iterative-unquote-comment:
mailinfo: avoid recursion when unquoting From headers
t5100: make rfc822 comment test more careful
Code clean-up for sanity checking of command line options for "git
show-ref".
* rs/show-ref-incompatible-options:
show-ref: use die_for_incompatible_opt3()
Bunch of small fix-ups to the reftable code.
* ps/reftable-fixes:
reftable/block: reuse buffer to compute record keys
reftable/block: introduce macro to initialize `struct block_iter`
reftable/merged: reuse buffer to compute record keys
reftable/stack: fix use of unseeded randomness
reftable/stack: fix stale lock when dying
reftable/stack: reuse buffers when reloading stack
reftable/stack: perform auto-compaction with transactional interface
reftable/stack: verify that `reftable_stack_add()` uses auto-compaction
reftable: handle interrupted writes
reftable: handle interrupted reads
reftable: wrap EXPECT macros in do/while
The optimization based on fsmonitor in the "diff --cached"
codepath is resurrected with the "fake-lstat" introduced earlier.
* jc/diff-cached-fsmonitor-fix:
diff-lib: fix check_removed() when fsmonitor is active
A new helper to let us pretend that we called lstat() when we know
our cache_entry is up-to-date via fsmonitor.
* jc/fake-lstat:
cache: add fake_lstat()
"git checkout -B <branch> [<start-point>]" allowed a branch that is
in use in another worktree to be updated and checked out, which
might be a bit unexpected. The rule has been tightened, which is a
breaking change. "--ignore-other-worktrees" option is required to
unbreak you, if you are used to the current behaviour that "-B"
overrides the safety.
* jc/checkout-B-branch-in-use:
checkout: forbid "-B <branch>" from touching a branch used elsewhere
checkout: refactor die_if_checked_out() caller
"git sparse-checkout set ---no-cone" uses default patterns when none
is given from the command line, but it should do so ONLY when
--stdin is not being used. Right now, add_patterns_from_input()
called when reading from the standard input is sloppy and does not
check if there are extra command line parameters that the command
will silently ignore, but that will change soon and not setting this
unnecessary and unused default patterns start to matter when it gets
fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
93851746 (parse-options: decouple "--end-of-options" and "--",
2023-12-06) updated the world order to make callers of parse-options
that set PARSE_OPT_KEEP_UNKNOWN_OPT responsible for deciding what to
do with "--end-of-options" they may see after parse_options() returns.
This made a previous bug in sparse-checkout more visible; namely,
that
git sparse-checkout [add|set] --[no-]cone --end-of-options ...
would simply treat "--end-of-options" as one of the paths to include in
the sparse-checkout. But this was already problematic before; namely,
git sparse-checkout [add|set| --[no-]cone --sikp-checks ...
would not give an error on the mis-typed "--skip-checks" but instead
simply treat "--sikp-checks" as a path or pattern to include in the
sparse-checkout, which is highly unfriendly.
This behavior began when the command was converted to parse-options in
7bffca95ea (sparse-checkout: add '--stdin' option to set subcommand,
2019-11-21). Back then it was just called KEEP_UNKNOWN. Later it was
renamed to KEEP_UNKNOWN_OPT in 99d86d60e5 (parse-options:
PARSE_OPT_KEEP_UNKNOWN only applies to --options, 2022-08-19) to clarify
that it was only about dashed options; we always keep non-option
arguments. Looking at that original patch, both Peff and I think that
the author was simply confused about the mis-named option, and really
just wanted to keep the non-option arguments. We never should have used
the flag all along (and the other cases were cargo-culted within the
file).
Remove the erroneous PARSE_OPT_KEEP_UNKNOWN_OPT flag now to fix this
bug. Note that this does mean that anyone who might have been using
git sparse-checkout [add|set] [--[no-]cone] --foo --bar
to request paths or patterns '--foo' and '--bar' will now have to use
git sparse-checkout [add|set] [--[no-]cone] -- --foo --bar
That makes sparse-checkout more consistent with other git commands,
provides users much friendlier error messages and behavior, and is
consistent with the all-caps warning in git-sparse-checkout.txt that
this command "is experimental...its behavior...will likely change". :-)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit will remove a bunch of unnecessary includes, but to do
so, we need some of the lower level direct includes that files rely on
to be explicitly specified.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three kinds of unnecessary includes:
* includes which aren't directly needed, but which include some other
forgotten include
* includes which could be replaced by a simple forward declaration of
some structs
* includes which aren't needed at all
Remove the third kind of include. Subsequent commits (and a subsequent
series) will work on removing some of the other kinds of includes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
