With Asciidoctor, all of the '+' introduced in a797c0ea04 ("cat-file:
add mailmap support to --batch-check option", 2022-12-20) render
literally rather than functioning as list continuations. With asciidoc,
this renders just fine. It's not too surprising that there is room for
ambiguity and surprises here, since we have lists within lists.
Simply replacing all of these '+' with empty lines makes this render
fine using both tools. Except, in the third hunk, where after this inner
'*' list ends, we want to continue with more contents of the outer list
item (`--batch-command=<format>`). We can solve any ambiguity here and
make this clear to both tools by wrapping the inner list in an open
block (using "--").
For consistency, let's wrap all three of these inner lists from
a797c0ea04 in open blocks. This also future-proofs us a little -- if we
ever gain more contents after any of those first two lists, as we did
already in a797c0ea04 for the third list, we're prepared and should
render fine with both asciidoc and Asciidoctor from the start.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `--batch-check` option does not
complain when `--use-mailmap` option is given, the latter option is
ignored. Compute the size of the object after replacing the idents and
report it instead.
In order to make `--batch-check` option honour the mailmap mechanism we
have to read the contents of the commit/tag object.
There were two ways to do it:
1. Make two calls to `oid_object_info_extended()`. If `--use-mailmap`
option is given, the first call will get us the type of the object
and second call will only be made if the object type is either a
commit or tag to get the contents of the object.
2. Make one call to `oid_object_info_extended()` to get the type of the
object. Then, if the object type is either of commit or tag, make a
call to `repo_read_object_file()` to read the contents of the object.
I benchmarked the following command with both the above approaches and
compared against the current implementation where `--use-mailmap`
option is ignored:
`git cat-file --use-mailmap --batch-all-objects --batch-check --buffer
--unordered`
The results can be summarized as follows:
Time (mean ± σ)
default 827.7 ms ± 104.8 ms
first approach 6.197 s ± 0.093 s
second approach 1.975 s ± 0.217 s
Since, the second approach is faster than the first one, I implemented
it in this patch.
The command git cat-file can now use the mailmap mechanism to replace
idents with canonical versions for commit and tag objects. There are
several options like `--batch`, `--batch-check` and `--batch-command`
that can be combined with `--use-mailmap`. But the documentation for
`--batch`, `--batch-check` and `--batch-command` doesn't say so. This
patch fixes that documentation.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `-s` option does not complain when
`--use-mailmap` option is given, the latter option is ignored. Compute
the size of the object after replacing the idents and report it instead.
In order to make `-s` option honour the mailmap mechanism we have to
read the contents of the commit/tag object. Make use of the call to
`oid_object_info_extended()` to get the contents of the object and store
in `buf`. `buf` is later freed in the function.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" etc. were invented back when everything was ASCII
and strlen() was a way to measure the display width of a string;
adjust them to compute the display width assuming UTF-8 pathnames.
* tb/diffstat-with-utf8-strwidth:
diff: leave NEEDWORK notes in show_stats() function
diff.c: use utf8_strwidth() to count display width
Fix a longstanding syntax error in Git.pm error codepath.
* mm/git-pm-try-catch-syntax-fix:
Git.pm: trust rev-parse to find bare repositories
Git.pm: add semicolon after catch statement
When creating a multi-pack bitmap, remove per-pack bitmap files
unconditionally as they will never be consulted.
* tb/remove-unused-pack-bitmap:
builtin/repack.c: remove redundant pack-based bitmaps
The short-help text shown by "git cmd -h" and the synopsis text
shown at the beginning of "git help cmd" have been made more
consistent.
* ab/doc-synopsis-and-cmd-usage: (34 commits)
tests: assert consistent whitespace in -h output
tests: start asserting that *.txt SYNOPSIS matches -h output
doc txt & -h consistency: make "worktree" consistent
worktree: define subcommand -h in terms of command -h
reflog doc: list real subcommands up-front
doc txt & -h consistency: make "commit" consistent
doc txt & -h consistency: make "diff-tree" consistent
doc txt & -h consistency: use "[<label>...]" for "zero or more"
doc txt & -h consistency: make "annotate" consistent
doc txt & -h consistency: make "stash" consistent
doc txt & -h consistency: add missing options
doc txt & -h consistency: use "git foo" form, not "git-foo"
doc txt & -h consistency: make "bundle" consistent
doc txt & -h consistency: make "read-tree" consistent
doc txt & -h consistency: make "rerere" consistent
doc txt & -h consistency: add missing options and labels
doc txt & -h consistency: make output order consistent
doc txt & -h consistency: add or fix optional "--" syntax
doc txt & -h consistency: fix mismatching labels
doc SYNOPSIS & -h: use "-" to separate words in labels, not "_"
...
Work around older clang that warns against C99 zero initialization
syntax for struct.
* jh/struct-zero-init-with-older-clang:
config.mak.dev: disable suggest braces error on old clang versions
"git branch --edit-description" on an unborh branch misleadingly
said that no such branch exists, which has been corrected.
* rj/branch-edit-desc-unborn:
branch: description for non-existent branch errors
Clarify that "the sentence after <area>: prefix does not begin with
a capital letter" rule applies only to the commit title.
* jc/use-of-uc-in-log-messages:
SubmittingPatches: use usual capitalization in the log message body
The code to clean temporary object directories (used for
quarantine) tried to remove them inside its signal handler, which
was a no-no.
* jc/tmp-objdir:
tmp-objdir: skip clean up when handling a signal
Update comment in the Makefile about the RUNTIME_PREFIX config knob.
* dd/document-runtime-prefix-better:
Makefile: clarify runtime relative gitexecdir
"git multi-pack-index repack/expire" used to repack unreachable
cruft into a new pack, which have been corrected.
cf. <63a1c3d4-eff3-af10-4263-058c88e74594@github.com>
* tb/midx-repack-ignore-cruft-packs:
midx.c: avoid cruft packs with non-zero `repack --batch-size`
midx.c: remove unnecessary loop condition
midx.c: replace `xcalloc()` with `CALLOC_ARRAY()`
midx.c: avoid cruft packs with `repack --batch-size=0`
midx.c: prevent `expire` from removing the cruft pack
Documentation/git-multi-pack-index.txt: clarify expire behavior
Documentation/git-multi-pack-index.txt: fix typo
Documentation on various Boolean GIT_* environment variables have
been clarified.
* jc/environ-docs:
environ: GIT_INDEX_VERSION affects not just a new repository
environ: simplify description of GIT_INDEX_FILE
environ: GIT_FLUSH should be made a usual Boolean
environ: explain Boolean environment variables
environ: document GIT_SSL_NO_VERIFY
Cherry pick commit d3775de0 (Makefile: force -O0 when compiling with
SANITIZE=leak, 2022-10-18), as otherwise the leak checker at GitHub
Actions CI seems to fail with a false positive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to build procedure with VS using CMake/CTest.
* js/cmake-updates:
cmake: increase time-out for a long-running test
cmake: avoid editing t/test-lib.sh
add -p: avoid ambiguous signed/unsigned comparison
cmake: copy the merge tools for testing
cmake: make it easier to diagnose regressions in CTest runs
Move a global variable added as a hack during regression fixes to
its proper place in the API.
* ab/run-hook-api-cleanup:
run-command.c: remove "max_processes", add "const" to signal() handler
run-command.c: pass "opts" further down, and use "opts->processes"
run-command.c: use "opts->processes", not "pp->max_processes"
run-command.c: don't copy "data" to "struct parallel_processes"
run-command.c: don't copy "ungroup" to "struct parallel_processes"
run-command.c: don't copy *_fn to "struct parallel_processes"
run-command.c: make "struct parallel_processes" const if possible
run-command API: move *_tr2() users to "run_processes_parallel()"
run-command API: have run_process_parallel() take an "opts" struct
run-command.c: use designated init for pp_init(), add "const"
run-command API: don't fall back on online_cpus()
run-command API: make "n" parameter a "size_t"
run-command tests: use "return", not "exit"
run-command API: have "run_processes_parallel{,_tr2}()" return void
run-command test helper: use "else if" pattern
When geometric repacking feature is in use together with the
--pack-kept-objects option, we lost packs marked with .keep files.
* tb/save-keep-pack-during-geometric-repack:
repack: don't remove .keep packs with `--pack-kept-objects`
More UNUSED annotation to help using -Wunused option with the
compiler.
* jk/unused-anno-more:
ll-merge: mark unused parameters in callbacks
diffcore-pickaxe: mark unused parameters in pickaxe functions
convert: mark unused parameter in null stream filter
apply: mark unused parameters in noop error/warning routine
apply: mark unused parameters in handlers
date: mark unused parameters in handler functions
string-list: mark unused callback parameters
object-file: mark unused parameters in hash_unknown functions
mark unused parameters in trivial compat functions
update-index: drop unused argc from do_reupdate()
submodule--helper: drop unused argc from module_list_compute()
diffstat_consume(): assert non-zero length
A bugfix with tracing support in midx codepath
* tb/midx-bitmap-selection-fix:
pack-bitmap-write.c: instrument number of reused bitmaps
midx.c: instrument MIDX and bitmap generation with trace2 regions
midx.c: consider annotated tags during bitmap selection
midx.c: fix whitespace typo
Give a bit more diversity to macOS CI by using sha1dc in one of the
jobs (the other one tests Apple Common Crypto).
* jc/ci-osx-with-sha1dc:
ci: use DC_SHA1=YesPlease on osx-clang job for CI
Allow configuration files in "protected" scopes to include other
configuration files.
* gc/bare-repo-discovery:
config: respect includes in protected config
"git diff rev^!" did not show combined diff to go to the rev from
its parents.
* rs/diff-caret-bang-with-parents:
diff: support ^! for merges
revisions.txt: unspecify order of resolved parts of ^!
revision: use strtol_i() for exclude_parent
Code clean-up.
* jk/cleanup-callback-parameters:
attr: drop DEBUG_ATTR code
commit: avoid writing to global in option callback
multi-pack-index: avoid writing to global in option callback
test-submodule: inline resolve_relative_url() function
"GIT_EDITOR=: git branch --edit-description" resulted in failure,
which has been corrected.
* jc/branch-description-unset:
branch: do not fail a no-op --edit-desc
The codepath to sign learned to report errors when it fails to read
from "ssh-keygen".
* pw/ssh-sign-report-errors:
ssh signing: return an error when signature cannot be read
Fix a logic in "mailinfo -b" that miscomputed the length of a
substring, which lead to an out-of-bounds access.
* pw/mailinfo-b-fix:
mailinfo -b: fix an out of bounds access
Force C locale while running tests around httpd to make sure we can
find expected error messages in the log.
* rs/test-httpd-in-C-locale:
t/lib-httpd: pass LANG and LC_ALL to Apache
In read-only repositories, "git merge-tree" tried to come up with a
merge result tree object, which it failed (which is not wrong) and
led to a segfault (which is bad), which has been corrected.
* js/merge-ort-in-read-only-repo:
merge-ort: return early when failing to write a blob
merge-ort: fix segmentation fault in read-only repositories
