Teach "--human-readable" aka "-H" option to "git count-objects" to
show various large numbers in Ki/Mi/GiB scaled as necessary.
* ap/strbuf-humanize:
count-objects: add -H option to humanize sizes
strbuf: create strbuf_humanise_bytes() to show byte sizes
This is pretty useful in `%<(100)%s%Cred%>(20)% an' where %s does not
use up all 100 columns and %an needs more than 20 columns. By
replacing %>(20) with %>>(20), %an can steal spaces from %s.
%>> understands escape sequences, so %Cred does not stop it from
stealing spaces in %<(100).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%>(N,trunc) truncates the right part after N columns and replace the
last two letters with "..". ltrunc does the same on the left. mtrunc
cuts the middle out.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Either %<, %> or %>< standing before a placeholder specifies how many
columns (at least as the placeholder can exceed it) it takes. Each
differs on how spaces are padded:
%< pads on the right (aka left alignment)
%> pads on the left (aka right alignment)
%>< pads both ways equally (aka centered)
The (<N>) follows them, e.g. `%<(100)', to specify the number of
columns the next placeholder takes.
However, if '|' stands before (<N>), e.g. `%>|(100)', then the number
of columns is calculated so that it reaches the Nth column on screen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not simply convenient over %C(auto,xxx). Some placeholders
(actually only one, %d) do multi coloring and we can't emit a multiple
colors with %C(auto,xxx).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows format-patch --cover-letter to be configurable; the most
notable is the "auto" mode to create cover-letter only for multi
patch series.
* fc/send-email-annotate:
rebase-am: explicitly disable cover-letter
format-patch: trivial cleanups
format-patch: add format.coverLetter configuration variable
log: update to OPT_BOOL
format-patch: refactor branch name calculation
format-patch: improve head calculation for cover-letter
send-email: make annotate configurable
Document where the configuration is read by the git-daemon when its --user
option is used.
* jk/daemon-user-doc:
doc: clarify that "git daemon --user=<user>" option does not export HOME=~user
Document that the "no-" prefix can also be used for non-boolean
options.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the new values that can be used for expiry values where their
use makes sense:
* git reflog expire --expire=[all|never]
* git reflog expire --expire-unreachable=[all|never]
* git gc --prune=all
Other combinations aren't useful and therefore no documentation is
added (even though they are allowed):
* git gc --prune=never
is redundant with "git gc --no-prune"
* git prune --expire=all
is equivalent to providing no --expire option
* git prune --expire=never
is a NOP
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has never worked, since it's inception the code simply skips all
the refs, essentially telling fast-export to do nothing.
Let's at least tell the user what's going on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refspec capability is not only used by 'import', also by
'export', and it's recommended in both.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The *:* refspec doesn't work, and never has, clarify the code and
documentation to reflect that. This in effect reverts commit 9e7673e
(gitremote-helpers(1): clarify refspec behaviour).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Highlight that CONFIG_SYSTEM and /etc/gitweb.conf are meant to be
the fallback configuration file in BUGS section of gitweb.conf
documentation. This will hopefully help people who expect them to
be a common default, which unfortunately came later in the history.
"git diff --diff-algorithm algo" is also understood as "git diff
--diff-algorithm=algo".
* jk/diff-algo-finishing-touches:
diff: allow unstuck arguments with --diff-algorithm
git-merge(1): document diff-algorithm option to merge-recursive
'git-status --ignored' still scans the work tree twice to collect
untracked and ignored files, respectively.
fill_directory / read_directory already supports collecting untracked and
ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED
flag to enable this has some git-add specific side-effects (e.g. it
doesn't recurse into ignored directories, so listing ignored files with
--untracked=all doesn't work).
The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored
files in dir_struct.entries[] (instead of dir_struct.ignored[] as
DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git.
We don't want to break the existing API, so lets introduce a new flag
DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar
to DIR_COLLECT_FILES, but will recurse into sub-directories based on the
other flags as DIR_SHOW_IGNORED does.
In dir.c::read_directory_recursive, add ignored files to either
dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move
the DIR_COLLECT_IGNORED case here so that filling result lists is in a
common place.
In wt-status.c::wt_status_collect_untracked, use the new flag and read
results from dir_struct.ignored[]. Remove the extra fill_directory call.
builtin/check-ignore.c doesn't call fill_directory, setting the git-add
specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity.
Update API documentation to reflect the changes.
Performance: with this patch, 'git-status --ignored' is typically as fast
as 'git-status'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exact definition of "refspec" can be found in git-fetch and
git-push manpages. So don't duplicate this here in the glossary.
Actually the definition of "pathspec" should be moved to a separate
file akin to the way it's done with "refspec". But this will only be
wortwhile when there's more to say about it. So for the time being
just improve the first sentence a little bit; fix the indentation of
the first paragraph after the bullet list and remove the one-item
list of magic signatures with its - for the user - unnecessary
introduction of "magic word 'top'".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the hash function is "SHA-1", not "SHA1".
Also to people who look up "object name" in the glossary,
the details of which hash function is applied on what to
compute "object name" is not important but the fact that the
name is meant to be an unique identifier for the contents
stored in the object is.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise when using 'git branch -vv' it's hard to see them among so
much output.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a remote helper using the 'export' protocol to specify that
it supports signed tags, changing the handing from 'warn-strip' to
'verbatim'.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This issues a warning while stripping signatures from signed tags, which
allows us to use it as default behaviour for remote helpers which cannot
specify how to handle signed tags.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -- <paths>" is usually used to restore all modified
files in <paths>. In sparse checkout mode, this command is overloaded
with another meaning: to add back all files in <paths> that are
excluded by sparse patterns.
As the former makes more sense for day-to-day use. Switch it to the
default and the latter enabled with --ignore-skip-worktree-bits.
While at there, add info/sparse-checkout to gitrepository-layout.txt
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setting up a "half-auth" repository in which reads can
be done anonymously but writes require authentication, it is
best if the server can require authentication for both the
ref advertisement and the actual receive-pack POSTs. This
alleviates the need for the admin to set http.receivepack in
the repositories, and means that the client is challenged
for credentials immediately, instead of partway through the
push process (and git clients older than v1.7.11.7 had
trouble handling these challenges).
Since detecting a push during the ref advertisement requires
matching the query string, and this is non-trivial to do in
Apache, we have traditionally punted and instructed users to
just protect "/git-receive-pack$". This patch provides the
mod_rewrite recipe to actually match the ref advertisement,
which is preferred.
While we're at it, let's add the recipe to our test scripts
so that we can be sure that it works, and doesn't get broken
(either by our changes or by changes in Apache).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
The fact that we don't set $HOME may confuse admins who expect
~<user>/.gitconfig to be used, because that is not what we try to
read. And worse, since 96b9e0e3, a git-daemon started by root is
likely to fail to run at all, as the user we switch to generally
cannot read ~root.
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
eb32d236 introduced the OBJ_OFS_DELTA object that uses a relative offset to
identify the base object instead of the 20-byte SHA1 reference. The pack file
documentation only mentions the SHA1 based reference in its description of the
deltified object entry.
Update the pack format documentation to clarify that the deltified object
representation refers to its base using either a relative negative offset or
the absolute SHA1 identifier.
Signed-off-by: Stefan Saasen <ssaasen@atlassian.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a boolean http.sslTry option which allows to enable AUTH SSL/TLS and
encrypted data transfers when connecting via regular FTP protocol.
Default is false since it might trigger certificate verification errors on
misconfigured servers.
Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Typo fix: replacing it's -> its
t: make PIPE a standard test prerequisite
archive: clarify explanation of --worktree-attributes
t/README: --immediate skips cleanup commands for failed tests
"git help" learned "-g" option to show the list of guides just like
list of commands are given with "-a".
* po/help-guides:
doc: include --guide option description for "git help"
help: mention -a and -g option, and 'git help <concept>' usage.
builtin/help.c: add list_common_guides_help() function
builtin/help.c: add --guide option
builtin/help.c: split "-a" processing into two
Make it a bit clearer that --worktree-attributes is about files in the
working tree (checked out files, possibly changed) and not the current
working directory ($PWD). Link to the ATTRIBUTES section, which has
more details.
Reported-by: Amit Bakshi <ambakshi@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-attr and check-ignore have the potential to deadlock callers
which do not read back the output in real-time. For example, if a
caller writes N paths out and then reads N lines back in, it risks
becoming blocked on write() to check-*, and check-* is blocked on
write back to the caller. Somebody has to buffer; the pipe buffers
provide some leeway, but they are limited.
Thanks to Peff for pointing this out:
http://article.gmane.org/gmane.comp.version-control.git/220534
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If `-n` or `--non-matching` are specified, non-matching pathnames will
also be output, in which case all fields in each output record except
for <pathname> will be empty. This can be useful when running
check-ignore as a background process, so that files can be
incrementally streamed to STDIN, and for each of these files, STDOUT
will indicate whether that file matched a pattern or not. (Without
this option, it would be impossible to tell whether the absence of
output for a given file meant that it didn't match any pattern, or
that the result simply hadn't been flushed to STDOUT yet.)
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The examples in the documentation are all for Apache. Let's
at least cover the basics: an anonymous server, an
authenticated server, and a "half auth" server with
anonymous read and authenticated write.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the http-backend is set up to allow anonymous read but
authenticated write, the http-backend manual suggests
catching only the "/git-receive-pack" POST of the packfile,
not the initial "info/refs?service=git-receive-pack" GET in
which we advertise refs.
This does work and is secure, as we do not allow any write
during the info/refs request, and the information in the ref
advertisement is the same that you would get from a fetch.
However, the configuration required by the server is
slightly more complex. The default `http.receivepack`
setting is to allow pushes if the webserver tells us that
the user authenticated, and otherwise to return a 403
("Forbidden"). That works fine if authentication is turned
on completely; the initial request requires authentication,
and http-backend realizes it is OK to do a push.
But for this "half-auth" state, no authentication has
occurred during the initial ref advertisement. The
http-backend CGI therefore does not think that pushing
should be enabled, and responds with a 403. The client
cannot continue, even though the server would have allowed
it to run if it had provided credentials.
It would be much better if the server responded with a 401,
asking for credentials during the initial contact. But
git-http-backend does not know about the server's auth
configuration (so a 401 would be confusing in the case of a
true anonymous server). Unfortunately, configuring Apache to
recognize the query string and apply the auth appropriately
to receive-pack (but not upload-pack) initial requests is
non-trivial.
The site admin can work around this by just turning on
http.receivepack explicitly in its repositories. Let's
document this workaround.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new humanize() function to print loose objects size, pack size,
and garbage size in verbose mode, or loose objects size in regular mode.
This patch doesn't change the way anything is displayed when the option
is not used.
Also update the documentation.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Humanization of downloaded size is done in the same function as text
formatting in 'process.c'. The code cannot be reused easily elsewhere.
Separate text formatting from size simplification and make the
function public in strbuf so that it can easily be used by other
callers.
We now can use strbuf_humanise_bytes() for both downloaded size and
download speed calculation. One of the drawbacks is that speed will
now look like this when download is stalled: "0 bytes/s" instead of
"0 KiB/s".
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
