"git fetch origin master" unlike "git fetch origin" or "git fetch"
did not update "refs/remotes/origin/master"; this was an early
design decision to keep the update of remote tracking branches
predictable, but in practice it turns out that people find it more
convenient to opportunisticly update them whenever we have a chance,
and we have been updating them when we run "git push" which already
breaks the original "predictability" anyway.
Now such a fetch does update refs/remotes/origin/master.
* jk/fetch-always-update-tracking:
fetch: don't try to update unfetched tracking refs
fetch: opportunistically update tracking refs
refactor "ref->merge" flag
fetch/pull doc: untangle meaning of bare <ref>
t5510: start tracking-ref tests from a known state
"git clone foo/bar:baz" cannot be a request to clone from a remote
over git-over-ssh specified in the scp style. Detect this case and
clone from a local repository at "foo/bar:baz".
* nd/clone-local-with-colon:
clone: allow cloning local paths with colons in them
Enhance "check-ignore" (1.8.2 update) to work more like "check-attr"
over bidi-pipes.
* as/check-ignore:
t0008: use named pipe (FIFO) to test check-ignore streaming
Documentation: add caveats about I/O buffering for check-{attr,ignore}
check-ignore: allow incremental streaming of queries via --stdin
check-ignore: move setup into cmd_check_ignore()
check-ignore: add -n / --non-matching option
t0008: remove duplicated test fixture data
Update "git checkout foo" that DWIMs the intended "upstream" and
turns it into "git checkout -t -b foo remotes/origin/foo" to
correctly take existing remote definitions into account.
The remote "origin" may be what uniquely map its own branch to
remotes/some/where/foo but that some/where may not be "origin".
* jh/checkout-auto-tracking:
glossary: Update and rephrase the definition of a remote-tracking branch
branch.c: Validate tracking branches with refspecs instead of refs/remotes/*
t9114.2: Don't use --track option against "svn-remote"-tracking branches
t7201.24: Add refspec to keep --track working
t3200.39: tracking setup should fail if there is no matching refspec.
checkout: Use remote refspecs when DWIMming tracking branches
t2024: Show failure to use refspec when DWIMming remote branch names
t2024: Add tests verifying current DWIM behavior of 'git checkout <branch>'
We used the approxidate() parser for "--expire=<timestamp>" options
of various commands, but it is better to treat --expire=all and
--expire=now a bit more specially than using the current timestamp.
Update "git gc" and "git reflog" with a new parsing function for
expiry dates.
* jc/prune-all:
prune: introduce OPT_EXPIRY_DATE() and use it
api-parse-options.txt: document "no-" for non-boolean options
git-gc.txt, git-reflog.txt: document new expiry options
date.c: add parse_expiry_date()
"git fetch" into a shallow repository from a repository that does
not know about the shallow boundary commits (e.g. a different fork
from the repository the current shallow repository was cloned from)
did not work correctly.
* mh/fetch-into-shallow:
t5500: add test for fetching with an unknown 'shallow'
upload-pack: ignore 'shallow' lines with unknown obj-ids
Update transport helper to report errors and maintain ref hierarchy
used to keep track of remote helper state better.
* fc/transport-helper-error-reporting:
transport-helper: fix remote helper namespace regression
test: remote-helper: add missing and
t5801: "VAR=VAL shell_func args" is forbidden
transport-helper: update remote helper namespace
transport-helper: trivial code shuffle
transport-helper: warn when refspec is not used
transport-helper: clarify pushing without refspecs
transport-helper: update refspec documentation
transport-helper: clarify *:* refspec
transport-helper: improve push messages
transport-helper: mention helper name when it dies
transport-helper: report errors properly
This new feature allows a rebase to be executed on a dirty worktree or
index. It works by creating a temporary "dangling merge commit" out
of the worktree and index changes (via 'git stash create'), and
automatically applying it after a successful rebase or abort.
rebase stores the SHA-1 hex of the temporary merge commit, along with
the rest of the rebase state, in either
.git/{rebase-merge,rebase-apply}/autostash depending on the kind of
rebase. Since $state_dir is automatically removed at the end of a
successful rebase or abort, so is the autostash.
The advantage of this approach is that we do not affect the normal
stash's reflogs, making the autostash invisible to the end-user. This
means that you can use 'git stash' during a rebase as usual.
When the autostash application results in a conflict, we push
$state_dir/autostash onto the normal stash and remove $state_dir
ending the rebase. The user can inspect the stash, and pop or drop at
any time.
Most significantly, this feature means that a caller like pull (with
pull.rebase set to true) can easily be patched to remove the
require_clean_work_tree restriction.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to make sure the cloned repository is good, we run "rev-list
--objects --not --all $new_refs" on the repository. This is expensive
on large repositories. This patch attempts to mitigate the impact in
this special case.
In the "good" clone case, we only have one pack. If all of the
following are met, we can be sure that all objects reachable from the
new refs exist, which is the intention of running "rev-list ...":
- all refs point to an object in the pack
- there are no dangling pointers in any object in the pack
- no objects in the pack point to objects outside the pack
The second and third checks can be done with the help of index-pack as
a slight variation of --strict check (which introduces a new condition
for the shortcut: pack transfer must be used and the number of objects
large enough to call index-pack). The first is checked in
check_everything_connected after we get an "ok" from index-pack.
"index-pack + new checks" is still faster than the current "index-pack
+ rev-list", which is the whole point of this patch. If any of the
conditions fail, we fall back to the good old but expensive "rev-list
..". In that case it's even more expensive because we have to pay for
the new checks in index-pack. But that should only happen when the
other side is either buggy or malicious.
Cloning linux-2.6 over file://
before after
real 3m25.693s 2m53.050s
user 5m2.037s 4m42.396s
sys 0m13.750s 0m16.574s
A more realistic test with ssh:// over wireless
before after
real 11m26.629s 10m4.213s
user 5m43.196s 5m19.444s
sys 0m35.812s 0m37.630s
This shortcut is not applied to shallow clones, partly because shallow
clones should have no more objects than a usual fetch and the cost of
rev-list is acceptable, partly to avoid dealing with corner cases when
grafting is involved.
This shortcut does not apply to unpack-objects code path either
because the number of objects must be small in order to trigger that
code path.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
file:///path/to/repo.git/ is converted to a hyperlink while others are
not. Put a backslash to avoid the conversion. Tested with asciidoc
8.6.5.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ec55559 (push: Add support for pre-push hooks, 2013-01-13) forgot to
add a note to git-push(1) about the new --no-verify option.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff-index" can be used to compare a tree with the tracked working
tree files (when used without the --index option), or with the index
(when used with the --index option).
The text however did not say anything about the comparison with the
working tree at all. Fix this.
Reported-by: Albert Netymk <albertnetymk@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This parameter is equivalent to the parameter --parents on svn cp commands
and is useful for non-standard repository layouts.
Signed-off-by: Tobias Schulte <tobias.schulte@gliderpilot.de>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The existing documentation for "-d" does not make it obvious whether
its argument is supposed to be a full svn path, a partial svn path,
the glob from the config file, or what. Clarify the text and add an
example to get the reader started.
Reported-by: Nathan Gray <n8gray@n8gray.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
"git svn" can be configured to use multiple fetch, branches, and tags
refspecs by passing multiple --branches or --tags options at init time
or editing the configuration file later, which can be handy when
working with messy Subversion repositories. Add a note to the
configuration section documenting how this works.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Only consider the first parent commit when walking the commit history. This
is useful if you only wish to match tags on your branch after a merge.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like commit f8246281af
unintentionally removed the documentation for the `-e` option.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe how 'add' sets the submodule's logical name, which is used in
the configuration entry names.
Clarify that 'init' only sets up the configuration entries for
submodules that have already been added elsewhere. Describe that
<path> arguments limit the submodules that are configured.
Signed-off-by: Dale Worley <worley@ariadne.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement commit 4b7f53da on top of the new simplify-merges
infrastructure, tightening the condition to only consider root parents;
the original version incorrectly dropped parents that were TREESAME to
anything.
Original log message follows.
The merge simplification rule stated in 6546b59 (revision traversal:
show full history with merge simplification, 2008-07-31) still
treated merge commits too specially. Namely, in a history with this
shape:
---o---o---M
/
x---x---x
where three 'x' were on a history completely unrelated to the main
history 'o' and do not touch any of the paths we are following, we
still said that after simplifying all of the parents of M, 'x'
(which is the leftmost 'x' that rightmost 'x simplifies down to) and
'o' (which would be the last commit on the main history that touches
the paths we are following) are independent from each other, and
both need to be kept.
That is incorrect; when the side branch 'x' never touches the paths,
it should be removed to allow M to simplify down to the last commit
on the main history that touches the paths.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When simplifying an odd merge, such as one that used "-s ours", we may
find ourselves TREESAME to apparently redundant parents. Prevent
simplify_merges() from removing every TREESAME parent; if this would
happen reinstate the first TREESAME parent - the one that the default
log would have followed.
This avoids producing a totally disjoint history from the default log
when the default log is a better explanation of the end result, and aids
visualisation of odd merges.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History simplification previously always treated merges as TREESAME
if they were TREESAME to any parent.
While this was consistent with the default behaviour, this could be
extremely unhelpful when searching detailed history, and could not be
overridden. For example, if a merge had ignored a change, as if by "-s
ours", then:
git log -m -p --full-history -Schange file
would successfully locate "change"'s addition but would not locate the
merge that resolved against it.
Futher, simplify_merges could drop the actual parent that a commit
was TREESAME to, leaving it as a normal commit marked TREESAME that
isn't actually TREESAME to its remaining parent.
Now redefine a commit's TREESAME flag to be true only if a commit is
TREESAME to _all_ of its parents. This doesn't affect either the default
simplify_history behaviour (because partially TREESAME merges are turned
into normal commits), or full-history with parent rewriting (because all
merges are output). But it does affect other modes. The clearest
difference is that --full-history will show more merges - sufficient to
ensure that -m -p --full-history log searches can really explain every
change to the file, including those changes' ultimate fate in merges.
Also modify simplify_merges to recalculate TREESAME after removing
a parent. This is achieved by storing per-parent TREESAME flags on the
initial scan, so the combined flag can be easily recomputed.
This fixes some t6111 failures, but creates a couple of new ones -
we are now showing some merges that don't need to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of --boundary uses the term "uninteresting", which is
not used or defined anywhere else in the documentation. This is
unhelpful and confusing to anyone who hasn't seen the UNINTERESTING
flag in the source code.
Change to use "excluded", as per revisions.txt.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the example given, P is not TREESAME to E. This doesn't affect the
current result, but it will matter when we change behaviour.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run a regular "git fetch" without arguments, we
update the tracking refs according to the configured
refspec. However, when we run "git fetch origin master" (or
"git pull origin master"), we do not look at the configured
refspecs at all, and just update FETCH_HEAD.
We miss an opportunity to update "refs/remotes/origin/master"
(or whatever the user has configured). Some users find this
confusing, because they would want to do further comparisons
against the old state of the remote master, like:
$ git pull origin master
$ git log HEAD...origin/master
In the currnet code, they are comparing against whatever
commit happened to be in origin/master from the last time
they did a complete "git fetch". This patch will update a
ref from the RHS of a configured refspec whenever we happen
to be fetching its LHS. That makes the case above work.
The downside is that any users who really care about whether
and when their tracking branches are updated may be
surprised.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation erroneously used the same wording for both fetch and
pull, stating that something will be merged even in git-fetch(1).
In addition, saying that "<ref> is equivalent to <ref>:" doesn't
really help anyone who still needs to read manpages. Clarify what is
actually going on.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People not familiar with AsciiDoc may not realize they are
supposed to update *.txt files and not *.html/*.1 files when
preparing patches to the project.
Signed-off-by: Dale Worley <worley@ariadne.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently and not so recently, we made sure that log/grep type operations
use textconv filters when a userfacing diff would do the same:
ef90ab6 (pickaxe: use textconv for -S counting, 2012-10-28)
b1c2f57 (diff_grep: use textconv buffers for add/deleted files, 2012-10-28)
0508fe5 (combine-diff: respect textconv attributes, 2011-05-23)
"git grep" currently does not use textconv filters at all, that is
neither for displaying the match and context nor for the actual grepping,
even when requested by --textconv.
Introduce an option "--textconv" which makes git grep use any configured
textconv filters for grepping and output purposes. It is off by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff_opt infrastructure sets flags based on defaults and command
line options. It is impossible to tell whether a flag has been set
as a default or on explicit request. Update the structure so that
this detection is possible:
* Add an extra "opt->touched_flags" that keeps track of all the
fields that have been touched by DIFF_OPT_SET and DIFF_OPT_CLR.
* You may continue setting the default values to the flags, like
commands in the "log" family do in cmd_log_init_defaults(), but
after you finished setting the defaults, you clear the
touched_flags field;
* And then you let the usual callchain call diff_opt_parse(),
allowing the opt->flags be set or unset, while keeping track of
which bits the user touched;
* There is an optional callback "opt->set_default" that is called
at the very beginning to let you inspect touched_flags and update
opt->flags appropriately, before the remainder of the diffcore
machinery is set up, taking the opt->flags value into account.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 1.8.2.3
t5004: avoid using tar for checking emptiness of archive
t5004: ignore pax global header file
mergetools/kdiff3: do not use --auto when diffing
transport-helper: trivial style cleanup
The SVN::Fetcher module is now able to filter for inclusion as well
as exclusion (as used by --ignore-path). Also added tests, documentation
changes and git completion script.
If you have an SVN repository with many top level directories and you
only want a git-svn clone of some of them then using --ignore-path is
difficult as it requires a very long regexp. In this case it's much
easier to filter for inclusion.
[ew: remove trailing whitespace]
Signed-off-by: Paul Walmsley <pjwhams@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Typing 'HEAD' is tedious, especially when we can use '@' instead.
The reason for choosing '@' is that it follows naturally from the
ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no
operation, and when we don't have those, it makes sens to assume
'HEAD'.
So now we can use 'git show @~1', and all that goody goodness.
Until now '@' was a valid name, but it conflicts with this idea, so
let's make it invalid. Probably very few people, if any, used this name.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually "foo:bar" is interpreted as an ssh url. This patch allows to
clone from such paths by putting at least one slash before the colon
(i.e. /path/to/foo:bar or just ./foo:bar).
file://foo:bar should also work, but local optimizations are off in
that case, which may be unwanted. While at there, warn the users about
--local being ignored in this case.
Reported-by: William Giokas <1007380@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/remote-tighten-commandline-parsing:
remote: 'show' and 'prune' can take more than one remote
remote: check for superfluous arguments in 'git remote add'
remote: add a test for extra arguments, according to docs
