Parsing the display format happens inside of `display_state_init()`. As
we only need to check for a simple config entry, this is a natural
location to put this code as it means that display-state logic is neatly
contained in a single location.
We're about to introduce a new "porcelain" output format though that is
intended to be parseable by machines, for example inside of a script.
This format can be enabled by passing the `--porcelain` switch to
git-fetch(1). As a consequence, we'll have to add a second callsite that
influences the output format, which will become awkward to handle.
Refactor the code such that callers are expected to pass the display
format that is to be used into `display_state_init()`. This allows us to
lift up the code into the main function, where we can then hook it into
command line options parser in a follow-up commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have two different display formats in git-fetch(1) with the
"full" and "compact" formats. This is tracked with a boolean value that
simply denotes whether the display format is supposed to be compacted
or not. This works reasonably well while there are only two formats, but
we're about to introduce another format that will make this a bit more
awkward to use.
Introduce a `enum display_format` that is more readily extensible.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When displaying reference updates, we try to print the references in a
neat table. As the table's width is determined its contents we thus need
to precalculate the overall width before we can start printing updated
references.
The calculation is driven by `display_state_init()`, which invokes
`refcol_width()` for every reference that is to be printed. This split
is somewhat confusing. For one, we filter references that shall be
attributed to the overall width in both places. And second, we
needlessly recalculate the maximum line length based on the terminal
columns and display format for every reference.
Refactor the code so that the complete width calculations are neatly
contained in `refcol_width()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`store_updated_refs()` parses the remote reference for two purposes:
- It gets used as a note when writing FETCH_HEAD.
- It is passed through to `display_ref_update()` to display
updated references in the following format:
```
* branch master -> master
```
In most cases, the parsed remote reference is the prettified reference
name and can thus be used for both cases. But if the remote reference is
HEAD, the parsed remote reference becomes empty. This is intended when
we write the FETCH_HEAD, where we skip writing the note in that case.
But when displaying the updated references this leads to inconsistent
output where the left-hand side of reference updates is missing in some
cases:
```
$ git fetch origin HEAD HEAD:explicit-head :implicit-head main
From https://github.com/git/git
* branch HEAD -> FETCH_HEAD
* [new ref] -> explicit-head
* [new ref] -> implicit-head
* branch main -> FETCH_HEAD
```
This behaviour has existed ever since the table-based output has been
introduced for git-fetch(1) via 165f390250 (git-fetch: more terse fetch
output, 2007-11-03) and was never explicitly documented either in the
commit message or in any of our tests. So while it may not be a bug per
se, it feels like a weird inconsistency and not like it was a concious
design decision.
The logic of how we compute the remote reference name that we ultimately
pass to `display_ref_update()` is not easy to follow. There are three
different cases here:
- When the remote reference name is "HEAD" we set the remote
reference name to the empty string. This is the case that causes
the left-hand side to go missing, where we would indeed want to
print "HEAD" instead of the empty string. This is what
`prettify_refname()` would return.
- When the remote reference name has a well-known prefix then we
strip this prefix. This matches what `prettify_refname()` does.
- Otherwise, we keep the fully qualified reference name. This also
matches what `prettify_refname()` does.
As the return value of `prettify_refname()` would do the correct thing
for us in all three cases, we can thus fix the inconsistency by passing
through the full remote reference name to `display_ref_update()`, which
learns to call `prettify_refname()`. At the same time, this also
simplifies the code a bit.
Note that this patch also changes formatting of the block that computes
the "kind" (which is the category like "branch" or "tag") and "what"
(which is the prettified reference name like "master" or "v1.0")
variables. This is done on purpose so that it is part of the diff,
hopefully making the change easier to comprehend.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a testcase that exercises the logic when an invalid output format is
passed via the `fetch.output` configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're about to introduce a new porcelain mode for the output of
git-fetch(1). As part of that we'll be introducing a set of new tests
that only relate to the output of this command.
Split out tests that exercise the output format of git-fetch(1) so that
it becomes easier to verify this functionality as a standalone unit. As
the tests assume that the default branch is called "main" we set up the
corresponding GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME environment variable
accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git fetch --no-recurse-submodules`, the exectation is that
we don't fetch any submodules. And while this works for fetches of a
single remote, it doesn't when fetching multiple remotes at once. The
result is that we do recurse into submodules even though the user has
explicitly asked us not to.
This is because while we pass on `--recurse-submodules={yes,on-demand}`
if specified by the user, we don't pass on `--no-recurse-submodules` to
the subprocess spawned to perform the submodule fetch.
Fix this by also forwarding this flag as expected.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean-up of the code path that deals with merge strategy option
handling in "git rebase".
* pw/rebase-cleanup-merge-strategy-option-handling:
rebase: remove a couple of redundant strategy tests
rebase -m: fix serialization of strategy options
rebase -m: cleanup --strategy-option handling
sequencer: use struct strvec to store merge strategy options
rebase: stop reading and writing unnecessary strategy state
"git branch -d origin/master" would say "no such branch", but it is
likely a missed "-r" if refs/remotes/origin/master exists. The
command has been taught to give such a hint in its error message.
* cm/branch-delete-error-message-update:
branch: improve error log on branch not found by checking remotes refs
"git mergetool" and "git difftool" learns a new configuration
guiDefault to optionally favor configured guitool over non-gui-tool
automatically when $DISPLAY is set.
* tk/mergetool-gui-default-config:
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY
Tests had a few places where we ignored PERL_PATH and blindly used
/usr/bin/perl, which have been corrected.
* jk/use-perl-path-consistently:
t/lib-httpd: pass PERL_PATH to CGI scripts
"git clone" from an empty repository learned to propagate the
choice of the hash algorithm from the source repository to the
newly created repository.
* jc/clone-object-format-from-void:
clone: propagate object-format when cloning from void
Consistently spell "Message-ID" as such, not "Message-Id".
* jc/spell-id-in-both-caps-in-message-id:
e-mail workflow: Message-ID is spelled with ID in both capital letters
"git sparse-checkout" command learns a debugging aid for the sparse
rule definitions.
* ws/sparse-check-rules:
builtin/sparse-checkout: add check-rules command
builtin/sparse-checkout: remove NEED_WORK_TREE flag
Remove a test in t3402 that has been redundant ever since 80ff47957b
(rebase: remember strategy and strategy options, 2011-02-06). That
commit added a new test, the first part of which (as noted in the old
commit message) duplicated an existing test.
Also remove a test t3418 that has been redundant since the merge backend
was removed in 68aa495b59 (rebase: implement --merge via the interactive
machinery, 2018-12-11), since it now tests the same code paths as the
preceding test.
Helped-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To store the strategy options rebase prepends " --" to each one and
writes them to a file. To load them it reads the file and passes the
contents to split_cmdline(). This roughly mimics the behavior of the
scripted rebase but has a couple of limitations, (1) options containing
whitespace are not properly preserved (this is true of the scripted
rebase as well) and (2) options containing '"' or '\' are incorrectly
parsed and may cause the parser to return an error.
Fix these limitations by quoting each option when they are stored so
that they can be parsed correctly. Now that "--preserve-merges" no
longer exist this change also stops prepending "--" to the options when
they are stored as that was an artifact of the scripted rebase.
These changes are backwards compatible so the files written by an older
version of git can still be read. They are also forwards compatible,
the file can still be parsed by recent versions of git as they treat the
"--" prefix as optional.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling "--strategy-option" rebase collects the commands into a
struct string_list, then concatenates them into a string, prepending "--"
to each one before splitting the string and removing the "--" prefix.
This is an artifact of the scripted rebase and the need to support
"rebase --preserve-merges". Now that "--preserve-merges" no-longer
exists we can cleanup the way the argument is handled.
The tests for a bad strategy option are adjusted now that
parse_strategy_opts() is no-longer called when starting a rebase. The
fact that it only errors out when running "git rebase --continue" is a
mixed blessing but the next commit will fix the root cause of the
parsing problem so lets not worry about that here.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer stores the merge strategy options in an array of strings
which allocated with ALLOC_GROW(). Using "struct strvec" avoids manually
managing the memory of that array and simplifies the code.
Aside from memory allocation the changes to the sequencer are largely
mechanical, changing xopts_nr to xopts.nr and xopts[i] to xopts.v[i]. A
new option parsing macro OPT_STRVEC() is also added to collect the
strategy options. Hopefully this can be used to simplify the code in
builtin/merge.c in the future.
Note that there is a change of behavior to "git cherry-pick" and "git
revert" as passing “--no-strategy-option” will now clear any previous
strategy options whereas before this change it did nothing.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The state files for "--strategy" and "--strategy-option" are written and
read twice, once by builtin/rebase.c and then by sequencer.c. This is an
artifact of the scripted rebase and the need to support "rebase
--preserve-merges". Now that "--preserve-merges" no-longer exists we
only need to read and write these files in sequencer.c. This enables us
to remove a call to free() in read_strategy_opts() that was added by
f1f4ebf432 (sequencer.c: fix "opts->strategy" leak in
read_strategy_opts(), 2022-11-08) as this commit fixes the root cause of
that leak.
There is further scope for removing duplication in the reading and
writing of state files between builtin/rebase.c and sequencer.c but that
is left for a follow up series.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emily finally figured out how to set up their alias at DayJob, and would
prefer to use nasamuffin@google.com, partially to reduce confusion
between IRC and list, and partially because they just like the alias a
lot more.
Signed-off-by: Emily Shaffer <nasamuffin@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --all" does not have to download and handle the same
bundleURI over and over, which has been corrected.
* ds/fetch-bundle-uri-with-all:
fetch: download bundles once, even with --all
Test framework fix.
* jk/chainlint-fixes:
tests: skip test_eval_ in internal chain-lint
tests: drop here-doc check from internal chain-linter
tests: diagnose unclosed here-doc in chainlint.pl
tests: replace chainlint subshell with a function
tests: run internal chain-linter under "make test"
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Add a few configuration variables to tell the cURL library that
different types of ssl-cert and ssl-key are in use.
* sm/ssl-key-type-config:
http: add support for different sslcert and sslkey types.
Assorted config API updates.
* ab/config-multi-and-nonbool:
for-each-repo: with bad config, don't conflate <path> and <cmd>
config API: add "string" version of *_value_multi(), fix segfaults
config API users: test for *_get_value_multi() segfaults
for-each-repo: error on bad --config
config API: have *_multi() return an "int" and take a "dest"
versioncmp.c: refactor config reading next commit
config API: add and use a "git_config_get()" family of functions
config tests: add "NULL" tests for *_get_value_multi()
config tests: cover blind spots in git_die_config() tests
Clean-up of the code path that reports what "git fetch" did to each
ref.
* ps/fetch-ref-update-reporting:
fetch: centralize printing of reference updates
fetch: centralize logic to print remote URL
fetch: centralize handling of per-reference format
fetch: pass the full local reference name to `format_display`
fetch: move output format into `display_state`
fetch: move reference width calculation into `display_state`
Code clean-up for "-Wunused-parameter" build.
* jk/unused-post-2.40-part2:
parse-options: drop parse_opt_unknown_cb()
t/helper: mark unused argv/argc arguments
mark "argv" as unused when we check argc
builtins: mark unused prefix parameters
builtins: annotate always-empty prefix parameters
builtins: always pass prefix to parse_options()
fast-import: fix file access when run from subdir
More "-Wunused-parameters" code clean-up.
* jk/unused-post-2.40:
transport: mark unused parameters in fetch_refs_from_bundle()
http: mark unused parameter in fill_active_slot() callbacks
http: drop unused parameter from start_object_request()
mailmap: drop debugging code
"git for-each-ref" learns '%(ahead-behind:<base>)' that computes the
distances from a single reference point in the history with bunch
of commits in bulk.
* ds/ahead-behind:
commit-reach: add tips_reachable_from_bases()
for-each-ref: add ahead-behind format atom
commit-reach: implement ahead_behind() logic
commit-graph: introduce `ensure_generations_valid()`
commit-graph: return generation from memory
commit-graph: simplify compute_generation_numbers()
commit-graph: refactor compute_topological_levels()
for-each-ref: explicitly test no matches
for-each-ref: add --stdin option
New git users may want to locally delete remote-tracking branches but
don't really understand how they are distinguished from branches by git.
Then one may naively try:
`git branch -d foo/bar` and get a correct error `branch foo/bar not
found` but hard to understand for a newbie, this patch aims to guide one
in such case.
when failing to delete a branch with `git branch -d <branch>` because
of branch not found, try to find a **remote refs** matching `<branch>`
and if so, add an hint:
`Did you forget --remote?` to the error message
Signed-off-by: Clement Mabileau <mabileau.clement@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discussed in t/README, tests should aim to use PERL_PATH rather than
straight "perl". We usually do this automatically with a "perl" function
in test-lib.sh, but a few cases need to be handled specially.
One such case is the apply-one-time-perl.sh CGI, which invokes plain
"perl". It should be using $PERL_PATH, but to make that work, we must
also instruct Apache to pass through the variable.
Prior to this patch, doing:
mv /usr/bin/perl /usr/bin/my-perl
make PERL_PATH=/usr/bin/my-perl test
would fail t5702, t5703, and t5616. After this it passes. This is a
pretty extreme case, as even if you install perl elsewhere, you'd likely
still have it in your $PATH. A more realistic case is that you don't
want to use the perl in your $PATH (because it's older, broken, etc) and
expect PERL_PATH to consistently override that (since that's what it's
documented to do). Removing it completely is just a convenient way of
completely breaking it for testing purposes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2007 we added a custom header macro to provide version information
7ef195ba3e (Documentation: Add version information to man pages,
2007-03-25),
However, in 2008 asciidoc added the attributes to do this properly [1].
This was not implemented in Git until 2019: 226daba280 (Doc/Makefile:
give mansource/-version/-manual attributes, 2019-09-16).
But in 2023 we are doing it properly, so there's no need for the custom
macro.
[1] https://github.com/asciidoc-py/asciidoc-py/commit/ad78a3c
Cc: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no merge.tool or diff.tool is configured or manually selected, the
selection of a default tool is sensitive to the DISPLAY variable; in a
GUI session a gui-specific tool will be proposed if found, and
otherwise a terminal-based one. This "GUI-optimizing" behavior is
important because a GUI can make a huge difference to a user's ability
to understand and correctly complete a non-trivial conflicting merge.
Some time ago the merge.guitool and diff.guitool config options were
introduced to enable users to configure both a GUI tool, and a non-GUI
tool (with fallback if no GUI tool configured), in the same environment.
Unfortunately, the --gui argument introduced to support the selection of
the guitool is still explicit. When using configured tools, there is no
equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI
environment" behavior.
As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration
options, difftool.guiDefault and mergetool.guiDefault, supporting a special
value "auto" which causes the corresponding tool or guitool to be selected
depending on the presence of a non-empty DISPLAY value. Also support "true"
to say "default to the guitool (unless --no-gui is passed on the
commandline)", and "false" as the previous default behavior when these new
configuration options are not specified.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the word "the", the sentence is a little harder to read. The
word "the" makes it clearer that the comment refers to discrete patches,
and not portions of individual patches.
Signed-off-by: Daniel Watson <ozzloy@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
