Flakey "git p4" tests, as well as "git svn" tests, are now skipped
in the (rather expensive) sanitizer CI job.
* js/ci-san-skip-p4-and-svn-tests:
ci(linux-asan-ubsan): let's save some time
Tests that are known to pass with LSan are now marked as such.
* tb/mark-more-tests-as-leak-free:
leak tests: mark t5583-push-branches.sh as leak-free
leak tests: mark t3321-notes-stripspace.sh as leak-free
leak tests: mark a handful of tests as leak-free
It may be tempting to leave the help text NULL for a command line
option that is either hidden or too obvious, but "git subcmd -h"
and "git subcmd --help-all" would have segfaulted if done so. Now
the help text is optional.
* rs/parse-options-help-text-is-optional:
parse-options: allow omitting option help text
"git format-patch" learns a way to feed cover letter description,
that (1) can be used on detached HEAD where there is no branch
description available, and (2) also can override the branch
description if there is one.
* ob/format-patch-description-file:
format-patch: add --description-file option
"git diff --no-such-option" and other corner cases around the exit
status of the "diff" command has been corrected.
* jk/diff-result-code-cleanup:
diff: drop useless "status" parameter from diff_result_code()
diff: drop useless return values in git-diff helpers
diff: drop useless return from run_diff_{files,index} functions
diff: die when failing to read index in git-diff builtin
diff: show usage for unknown builtin_diff_files() options
diff-files: avoid negative exit value
diff: spell DIFF_INDEX_CACHED out when calling run_diff_index()
The use of API for consistency between two calls to
require_clean_work_tree() from the sequencer code has been cleaned
up.
* ob/sequencer-empty-hint-fix:
sequencer: rectify empty hint in call of require_clean_work_tree()
transfer.unpackLimit ought to be used as a fallback, but overrode
fetch.unpackLimit and receive.unpackLimit instead.
* ts/unpacklimit-config-fix:
transfer.unpackLimit: fetch/receive.unpackLimit takes precedence
"git diff -w --exit-code" with various options did not work
correctly, which is being addressed.
* jc/diff-exit-code-with-w-fixes:
diff: the -w option breaks --exit-code for --raw and other output modes
t4040: remove test that succeeded for a wrong reason
diff: teach "--stat -w --exit-code" to notice differences
diff: mode-only change should be noticed by "--patch -w --exit-code"
diff: move the fallback "--exit-code" code down
The commit-graph verification code that detects mixture of zero and
non-zero generation numbers has been updated.
* tb/commit-graph-verify-fix:
commit-graph: avoid repeated mixed generation number warnings
t/t5318-commit-graph.sh: test generation zero transitions during fsck
commit-graph: verify swapped zero/non-zero generation cases
commit-graph: introduce `commit_graph_generation_from_graph()`
Every once in a while, the `git-p4` tests flake for reasons outside of
our control. It typically fails with "Connection refused" e.g. here:
https://github.com/git/git/actions/runs/5969707156/job/16196057724
[...]
+ git p4 clone --dest=/home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git //depot
Initialized empty Git repository in /home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git/.git/
Perforce client error:
Connect to server failed; check $P4PORT.
TCP connect to localhost:9807 failed.
connect: 127.0.0.1:9807: Connection refused
failure accessing depot: could not run p4
Importing from //depot into /home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git
[...]
This happens in other jobs, too, but in the `linux-asan-ubsan` job it
hurts the most because that job often takes over a full hour to run,
therefore re-running a failed `linux-asan-ubsan` job is _very_ costly.
The purpose of the `linux-asan-ubsan` job is to exercise the C code of
Git, anyway, and any part of Git's source code that the `git-p4` tests
run and that would benefit from the attention of ASAN/UBSAN are run
better in other tests anyway, as debugging C code run via Python scripts
can get a bit hairy.
In fact, it is not even just `git-p4` that is the problem (even if it
flakes often enough to be problematic in the CI builds), but really the
part about Python scripts. So let's just skip any Python parts of the
tests from being run in that job.
For good measure, also skip the Subversion tests because debugging C
code run via Perl scripts is as much fun as debugging C code run via
Python scripts. And it will reduce the time this very expensive job
takes, which is a big benefit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git GUI updates.
* py/git-gui-updates:
git-gui - use mkshortcut on Cygwin
git-gui - use cygstart to browse on Cygwin
git-gui - remove obsolete Cygwin specific code
git gui Makefile - remove Cygwin modifications
Makefiles: change search through $(MAKEFLAGS) for GNU make 4.4
Work around Tcl's default `PATH` lookup
Move the `_which` function (almost) to the top
Move is_<platform> functions to the beginning
is_Cygwin: avoid `exec`ing anything
windows: ignore empty `PATH` elements
git-gui: Fix a typo in README
Tweak GitHub Actions CI so that pushing the same commit to multiple
branch tips at the same time will not waste building and testing
the same thing twice.
* jc/ci-skip-same-commit:
ci: avoid building from the same commit in parallel
Teach "git check-attr" work better with sparse-index.
* sl/sparse-check-attr:
check-attr: integrate with sparse-index
attr.c: read attributes in a sparse directory
t1092: add tests for 'git check-attr'
When t5583-push-branches.sh was originally introduced via 425b4d7f47
(push: introduce '--branches' option, 2023-05-06), it was not leak-free.
In fact, the test did not even run correctly until 022fbb655d (t5583:
fix shebang line, 2023-05-12), but after applying that patch, we see a
failure at t5583.8:
==2529087==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 384 byte(s) in 1 object(s) allocated from:
#0 0x7fb536330986 in __interceptor_realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98
#1 0x55e07606cbf9 in xrealloc wrapper.c:140
#2 0x55e075fb6cb3 in prio_queue_put prio-queue.c:42
#3 0x55e075ec81cb in get_reachable_subset commit-reach.c:917
#4 0x55e075fe9cce in add_missing_tags remote.c:1518
#5 0x55e075fea1e4 in match_push_refs remote.c:1665
#6 0x55e076050a8e in transport_push transport.c:1378
#7 0x55e075e2eb74 in push_with_options builtin/push.c:401
#8 0x55e075e2edb0 in do_push builtin/push.c:458
#9 0x55e075e2ff7a in cmd_push builtin/push.c:702
#10 0x55e075d8aaf0 in run_builtin git.c:452
#11 0x55e075d8af08 in handle_builtin git.c:706
#12 0x55e075d8b12c in run_argv git.c:770
#13 0x55e075d8b6a0 in cmd_main git.c:905
#14 0x55e075e81f07 in main common-main.c:60
#15 0x7fb5360ab6c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
#16 0x7fb5360ab784 in __libc_start_main_impl ../csu/libc-start.c:360
#17 0x55e075d88f40 in _start (git+0x1ff40) (BuildId: 38ad998b85a535e786129979443630d025ec2453)
SUMMARY: LeakSanitizer: 384 byte(s) leaked in 1 allocation(s).
This leak was addressed independently via 68b51172e3 (commit-reach: fix
memory leak in get_reachable_subset(), 2023-06-03), which makes t5583
leak-free.
But t5583 was not in the tree when 68b51172e3 was written, and the two
only met after the latter was merged back in via 693bde461c (Merge
branch 'mh/commit-reach-get-reachable-plug-leak', 2023-06-20).
At that point, t5583 was leak-free. Let's mark it as such accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test was leak-free when t3321 was originally introduced, but never
marked as such:
$ rev="$(git log --format='%H' --reverse -1 HEAD^ -- t/t3321-notes-stripspace.sh)"
$ git checkout $rev
$ make SANITIZE=leak
[...]
$ make -C t GIT_TEST_PASSING_SANITIZE_LEAK=check GIT_TEST_OPTS=--immediate t3321-notes-stripspace.sh
[...]
# passed all 27 test(s)
1..27
# faking up non-zero exit with --invert-exit-code
make: *** [Makefile:66: t3321-notes-stripspace.sh] Error 1
make: Leaving directory '/home/ttaylorr/src/git/t'
Mark this test as leak-free accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the topic merged via 5a4f8381b6 (Merge branch
'ab/mark-leak-free-tests', 2021-10-25), a handful of tests in the suite
were marked as leak-free.
Since then, a handful of tests have become leak-free due to changes like
- 861c56f6f9 (branch: fix a leak in setup_tracking, 2023-06-11), and
- 866b43e644 (do_read_index(): always mark index as initialized unless
erroring out, 2023-06-29)
, but weren't updated at the time to mark themselves as such. This leads
to test "failures" when running:
$ make SANITIZE=leak
$ make -C t \
GIT_TEST_PASSING_SANITIZE_LEAK=check \
GIT_TEST_SANITIZE_LEAK_LOG=true \
GIT_TEST_OPTS=-vi test
This patch closes those gaps by exporting TEST_PASSES_SANITIZE_LEAK=true
before sourcing t/test-lib.sh on most remaining leak-free tests.
There are a couple of other tests which are similarly leak-free, but not
included in the list of tests touched by this patch. The remaining tests
will be addressed in the subsequent two patches.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two topics did not see much interest and reviews while they
were on 'next'; let's "inflict" them to the general public and see
if anybody screams, which is much less nicer way than to merge
only topics that are well reviewed down in an orderly manner, but
that is the only thing we can do to these topics without any
development community help.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update two credential helpers to correctly match which credential
to erase; they dropped not the ones with stale password.
* mh/credential-erase-improvements-more:
credential/wincred: erase matching creds only
credential/libsecret: erase matching creds only
The way authentication related data other than passwords (e.g.
oath token and password expiration data) are stored in libsecret
keyrings has been rethought.
* mh/credential-libsecret-attrs:
credential/libsecret: store new attributes
When running 'scalar reconfigure -a', Scalar has warning messages about
the repository missing (or not containing a .git directory). Failures
can also happen while trying to modify the repository-local config for
that repository.
These warnings may seem confusing to users who don't understand what
they mean or how to stop them.
Add a warning that instructs the user how to remove the warning in
future installations.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many reasons why discovering a Git directory may fail. In
particular, 8959555cee (setup_git_directory(): add an owner check for
the top-level directory, 2022-03-02) added ownership checks as a
security precaution.
Callers attempting to set up a Git directory may want to inform the user
about the reason for the failure. For that, expose the enum
discovery_result from within setup.c and move it into cache.h where
discover_git_directory() is defined.
I initially wanted to change the return type of discover_git_directory()
to be this enum, but several callers rely upon the "zero means success".
The two problems with this are:
1. The zero value of the enum is actually GIT_DIR_NONE, so nonpositive
results are errors.
2. There are multiple successful states; positive results are
successful.
It is worth noting that GIT_DIR_NONE is not returned, so we remove this
option from the enum. We must be careful to keep the successful reasons
as positive values, so they are given explicit positive values.
Instead of updating all callers immediately, add a new method,
discover_git_directory_reason(), and convert discover_git_directory() to
be a thin shim on top of it.
One thing that is important to note is that discover_git_directory()
previously returned -1 on error, so let's continue that into the future.
There is only one caller (in scalar.c) that depends on that signedness
instead of a non-zero check, so clean that up, too.
Because there are extra checks that discover_git_directory_reason() does
after setup_git_directory_gently_1(), there are other modes that can be
returned for failure states. Add these modes to the enum, but be sure to
explicitly add them as BUG() states in the switch of
setup_git_directory_gently().
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users have strong aversions to Scalar's opinion that the repository
should be in a 'src' directory, even though this creates a clean slate
for placing build artifacts in adjacent directories.
The new --no-src option allows users to opt out of the default behavior.
While adding options, make sure the usage output by 'scalar clone -h'
reports the same as the SYNOPSIS line in Documentation/scalar.txt.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1b68387e02 (builtin/receive-pack.c: use parse_options API, 2016-03-02)
added the options --stateless-rpc, --advertise-refs and
--reject-thin-pack-for-testing with a NULL `help` string; 03831ef7b5
(difftool: implement the functionality in the builtin, 2017-01-19)
similarly added the "helpless" option --prompt. Presumably this was
done because all four options are hidden and self-explanatory.
They cause a NULL pointer dereference when using the option --help-all
with their respective tool, though. Handle such options gracefully
instead by turning the NULL pointer into an empty string at the top of
the loop, always printing a newline at the end and passing through the
separating newlines from the help text.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd -h" learned to signal which options can be negated by
listing such options like "--[no-]opt".
* rs/parse-options-negation-help:
parse-options: simplify usage_padding()
parse-options: no --[no-]no-...
parse-options: factor out usage_indent() and usage_padding()
parse-options: show negatability of options in short help
t1502: test option negation
t1502: move optionspec help output to a file
t1502, docs: disallow --no-help
subtree: disallow --no-{help,quiet,debug,branch,message}
At times, we may need to push the same commit to multiple branches
in the same push. Rewinding 'next' to rebuild on top of 'master'
soon after a release is such an occasion. Making sure 'main' stays
in sync with 'master' to help those who expect that primary branch
of the project is named either of these is another.
We already use the branch name as a "concurrency group" key, but
that does not address the situation illustrated above.
Let's introduce another `concurrency` attribute, using the commit
hash as the concurrency group key, on the workflow run level, to
address this. This will hold any workflow run in the queued state
when there is already a workflow run targeting the same commit,
until that latter run completed. The `skip-if-redundant` check of
the second run will then have a chance to see whether the first
run succeeded.
The only caveat with this strategy is that only one workflow run
will be kept in the queued state by the `concurrency` feature: if
another run targeting the same commit is triggered, the
previously-queued run will be canceled. Considering the benefit,
this seems the smaller price to pay than to overload Git's build
agent pool with undesired workflow runs.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* https://github.com/prati0100/git-gui:
git-gui - use mkshortcut on Cygwin
git-gui - use cygstart to browse on Cygwin
git-gui - remove obsolete Cygwin specific code
git gui Makefile - remove Cygwin modifications
Makefiles: change search through $(MAKEFLAGS) for GNU make 4.4
Work around Tcl's default `PATH` lookup
Move the `_which` function (almost) to the top
Move is_<platform> functions to the beginning
is_Cygwin: avoid `exec`ing anything
windows: ignore empty `PATH` elements
git-gui: Fix a typo in README
Hourly and other schedule of "git maintenance" jobs are randomly
distributed now.
* ds/maintenance-schedule-fuzz:
maintenance: update schedule before config
maintenance: fix systemd schedule overlaps
maintenance: use random minute in systemd scheduler
maintenance: swap method locations
maintenance: use random minute in cron scheduler
maintenance: use random minute in Windows scheduler
maintenance: use random minute in launchctl scheduler
maintenance: add get_random_minute()
Test updates.
* ob/test-lib-rebase-fake-editor-updates:
t/lib-rebase: improve documentation of set_fake_editor()
t/lib-rebase: set_fake_editor(): handle FAKE_LINES more consistently
t/lib-rebase: set_fake_editor(): fix recognition of reset's short command
Overly long label names used in the sequencer machinery are now
chopped to fit under filesystem limitation.
* mp/rebase-label-length-limit:
rebase: allow overriding the maximal length of the generated labels
sequencer: truncate labels to accommodate loose refs
A message written in olden time prevented a branch from getting
checked out saying it is already checked out elsewhere, but these
days, we treat a branch that is being bisected or rebased just like
a branch that is checked out and protect it. Rephrase the message
to say that the branch is in use.
* rj/branch-in-use-error-message:
branch: error message checking out a branch in use
branch: error message deleting a branch in use
The canonical way to represent "no error hint" is making it NULL, which
shortcuts the error() call altogether. This fixes the output by removing
the line which said just "error:", which would appear when the worktree
is dirtied while editing the initial rebase todo file. This was
introduced by 97e1873 (rebase -i: rewrite complete_action() in C,
2018-08-28), which did a somewhat inaccurate conversion from shell.
To avoid that such bugs re-appear, test for the condition in
require_clean_work_tree().
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove some code supporting ancient Cygwin Tcl/Tk versions. Also fix
exploring working directory and making desktop shortcuts on Cygwin.
* ml/cygwin-fixes:
git-gui - use mkshortcut on Cygwin
git-gui - use cygstart to browse on Cygwin
git-gui - remove obsolete Cygwin specific code
git gui Makefile - remove Cygwin modifications
git-gui enables the "Repository->Create Desktop Icon" item on Cygwin,
offering to create a shortcut that starts git-gui on the current
repository. The code in do_cygwin_shortcut invokes function
win32_create_lnk to create the shortcut. This latter function is shared
between Cygwin and Git For Windows and expects Windows rather than unix
pathnames, though do_cygwin_shortcut provides unix pathnames. Also, this
function tries to invoke the Windows Script Host to run a javascript
snippet, but this fails under Cygwin's Tcl. So, win32_create_lnk just
does not support Cygwin.
However, Cygwin's default installation provides /bin/mkshortcut for
creating desktop shortcuts. This is compatible with exec under Cygwin's
Tcl, understands Cygwin's unix pathnames, and avoids the need for shell
escapes to encode troublesome paths. So, teach git-gui to use mkshortcut
on Cygwin, leaving win32_create_lnk unchanged and for exclusive use by
Git For Windows.
Notes: "CHERE_INVOKING=1" is recognized by Cygwin's /etc/profile and
prevents a "chdir $HOME", leaving the shell in the working directory
specified by the shortcut. That directory is written directly by
mkshortcut eliminating any problems with shell escapes and quoting.
The code being replaced includes the full pathname of the git-gui
creating the shortcut, but that git-gui might not be compatible with the
git found after /etc/profile sets the path, and might have a pathname
that defies encoding using shell escapes that can survive the multiple
incompatible interpreters involved in the chain of creating and using
this shortcut. The new code uses bare "git gui" as the command to
execute, thus using the system git to launch the system git-gui, and
avoiding both issues.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
git-gui enables the "Repository->Explore Working Copy" menu on Cygwin,
offering to open a Windows graphical file browser at the root of the
working directory. This code, shared with Git For Windows support,
depends upon use of Windows pathnames. However, git gui on Cygwin uses
unix pathnames, so this shared code will not work on Cygwin.
A base install of Cygwin provides the /bin/cygstart utility that runs
a registered Windows application based upon the file type, after
translating unix pathnames to Windows. Adding the --explore option
guarantees that the Windows file explorer is opened, regardless of the
supplied pathname's file type and avoiding possibility of some other
action being taken.
So, teach git-gui to use cygstart --explore on Cygwin, restoring the
pre-2012 behavior of opening a Windows file explorer for browsing. This
separates the Git For Windows and Cygwin code paths. Note that
is_Windows is never true on Cygwin, and is_Cygwin is never true on Git
for Windows, though this is not obvious by examining the code for those
independent functions.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
In the current git release, git-gui runs on Cygwin without enabling any
of git-gui's Cygwin specific code. This happens as the Cygwin specific
code in git-gui was (mostly) written in 2007-2008 to work with Cygwin's
then supplied Tcl/Tk which was an incompletely ported variant of the
8.4.1 Windows Tcl/Tk code. In March, 2012, that 8.4.1 package was
replaced with a full port based upon the upstream unix/X11 code,
since maintained up to date. The two Tcl/Tk packages are completely
incompatible, and have different signatures.
When Cygwin's Tcl/Tk signature changed in 2012, git-gui no longer
detected Cygwin, so did not enable Cygwin specific code, and the POSIX
environment provided by Cygwin since 2012 supported git-gui as a generic
unix. Thus, no-one apparently noticed the existence of incompatible
Cygwin specific code.
However, since commit c5766eae6f in the git-gui source tree
(https://github.com/prati0100/git-gui, master at a5005ded), and not yet
pulled into the git repository, the is_Cygwin function does detect
Cygwin using the unix/X11 Tcl/Tk. The Cygwin specific code is enabled,
causing use of Windows rather than unix pathnames, and enabling
incorrect warnings about environment variables that were relevant only
to the old Tcl/Tk. The end result is that (upstream) git-gui is now
incompatible with Cygwin.
So, delete Cygwin specific code (code protected by "if is_Cygwin") that
is not needed in any form to work with the unix/X11 Tcl/Tk.
Cygwin specific code required to enable file browsing and shortcut
creation is not addressed in this patch, does not currently work, and
invocation of those items may leave git-gui in a confused state.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
