When specifying both revisions and pathnames, we allow
"<rev> -- <pathspec>" to be spelled without the "--" as long
as it is not ambiguous. The original logic was something
like:
1. Resolve each item with get_sha1(). If successful,
we know it can be a <rev>. Verify that it _isn't_ a
filename, using verify_non_filename(), and complain of
ambiguity otherwise.
2. If get_sha1() didn't succeed, make sure that it _is_
a file, using verify_filename(). If not, complain
that it is neither a <rev> nor a <pathspec>.
Both verify_filename() and verify_non_filename() rely on
check_filename(), which definitely said "yes, this is a
file" or "no, it is not" using lstat().
Commit 28fcc0b (pathspec: avoid the need of "--" when
wildcard is used, 2015-05-02) introduced a convenience
feature: check_filename() will consider anything with
wildcard meta-characters as a possible filename, without
even checking the filesystem.
This works well for case 2. For such a wildcard, we would
previously have died and said "it is neither". Post-28fcc0b,
we assume it's a pathspec and proceed.
But it makes some instances of case 1 worse. We may have an
extended sha1 expression that contains meta-characters
(e.g., "HEAD^{/foo.*bar}"), and we now complain that it's
also a filename, due to the wildcard characters (even though
that wildcard would not match anything in the filesystem).
One solution would be to actually expand the pathname and
see if it matches anything on the filesystem. But that's
potentially expensive, and we do not have to be so rigorous
for this DWIM magic (if you want rigor, use "--").
Instead, we can just use different rules for cases 1 and 2.
When we know something is a rev, we will complain only if it
meets a much higher standard for "this is also a file";
namely that it actually exists in the filesystem. Case 2
remains the same: we use the looser "it could be a filename"
standard introduced by 28fcc0b.
We can accomplish this by pulling the wildcard logic out of
check_filename() and putting it into verify_filename(). Its
partner verify_non_filename() does not need a change, since
check_filename() goes back to implementing the "higher
standard".
Besides these two callers of check_filename(), there is one
other: git-checkout does a similar DWIM itself. It hits this
code path only after get_sha1() has returned failure, making
it case 2, which gets the special wildcard treatment.
Note that we drop the tests in t2019 in favor of a more
complete set in t6133. t2019 was not the right place for
them (it's about refname ambiguity, not dwim parsing
ambiguity), and the second test explicitly checked for the
opposite result of the case we are fixing here (which didn't
really make any sense; as shown by the test_must_fail in the
test, it would only serve to annoy people).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
878 lines
23 KiB
C
878 lines
23 KiB
C
#include "cache.h"
|
|
#include "dir.h"
|
|
#include "string-list.h"
|
|
|
|
static int inside_git_dir = -1;
|
|
static int inside_work_tree = -1;
|
|
|
|
/*
|
|
* The input parameter must contain an absolute path, and it must already be
|
|
* normalized.
|
|
*
|
|
* Find the part of an absolute path that lies inside the work tree by
|
|
* dereferencing symlinks outside the work tree, for example:
|
|
* /dir1/repo/dir2/file (work tree is /dir1/repo) -> dir2/file
|
|
* /dir/file (work tree is /) -> dir/file
|
|
* /dir/symlink1/symlink2 (symlink1 points to work tree) -> symlink2
|
|
* /dir/repolink/file (repolink points to /dir/repo) -> file
|
|
* /dir/repo (exactly equal to work tree) -> (empty string)
|
|
*/
|
|
static int abspath_part_inside_repo(char *path)
|
|
{
|
|
size_t len;
|
|
size_t wtlen;
|
|
char *path0;
|
|
int off;
|
|
const char *work_tree = get_git_work_tree();
|
|
|
|
if (!work_tree)
|
|
return -1;
|
|
wtlen = strlen(work_tree);
|
|
len = strlen(path);
|
|
off = offset_1st_component(path);
|
|
|
|
/* check if work tree is already the prefix */
|
|
if (wtlen <= len && !strncmp(path, work_tree, wtlen)) {
|
|
if (path[wtlen] == '/') {
|
|
memmove(path, path + wtlen + 1, len - wtlen);
|
|
return 0;
|
|
} else if (path[wtlen - 1] == '/' || path[wtlen] == '\0') {
|
|
/* work tree is the root, or the whole path */
|
|
memmove(path, path + wtlen, len - wtlen + 1);
|
|
return 0;
|
|
}
|
|
/* work tree might match beginning of a symlink to work tree */
|
|
off = wtlen;
|
|
}
|
|
path0 = path;
|
|
path += off;
|
|
|
|
/* check each '/'-terminated level */
|
|
while (*path) {
|
|
path++;
|
|
if (*path == '/') {
|
|
*path = '\0';
|
|
if (strcmp(real_path(path0), work_tree) == 0) {
|
|
memmove(path0, path + 1, len - (path - path0));
|
|
return 0;
|
|
}
|
|
*path = '/';
|
|
}
|
|
}
|
|
|
|
/* check whole path */
|
|
if (strcmp(real_path(path0), work_tree) == 0) {
|
|
*path0 = '\0';
|
|
return 0;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Normalize "path", prepending the "prefix" for relative paths. If
|
|
* remaining_prefix is not NULL, return the actual prefix still
|
|
* remains in the path. For example, prefix = sub1/sub2/ and path is
|
|
*
|
|
* foo -> sub1/sub2/foo (full prefix)
|
|
* ../foo -> sub1/foo (remaining prefix is sub1/)
|
|
* ../../bar -> bar (no remaining prefix)
|
|
* ../../sub1/sub2/foo -> sub1/sub2/foo (but no remaining prefix)
|
|
* `pwd`/../bar -> sub1/bar (no remaining prefix)
|
|
*/
|
|
char *prefix_path_gently(const char *prefix, int len,
|
|
int *remaining_prefix, const char *path)
|
|
{
|
|
const char *orig = path;
|
|
char *sanitized;
|
|
if (is_absolute_path(orig)) {
|
|
sanitized = xmalloc(strlen(path) + 1);
|
|
if (remaining_prefix)
|
|
*remaining_prefix = 0;
|
|
if (normalize_path_copy_len(sanitized, path, remaining_prefix)) {
|
|
free(sanitized);
|
|
return NULL;
|
|
}
|
|
if (abspath_part_inside_repo(sanitized)) {
|
|
free(sanitized);
|
|
return NULL;
|
|
}
|
|
} else {
|
|
sanitized = xmalloc(len + strlen(path) + 1);
|
|
if (len)
|
|
memcpy(sanitized, prefix, len);
|
|
strcpy(sanitized + len, path);
|
|
if (remaining_prefix)
|
|
*remaining_prefix = len;
|
|
if (normalize_path_copy_len(sanitized, sanitized, remaining_prefix)) {
|
|
free(sanitized);
|
|
return NULL;
|
|
}
|
|
}
|
|
return sanitized;
|
|
}
|
|
|
|
char *prefix_path(const char *prefix, int len, const char *path)
|
|
{
|
|
char *r = prefix_path_gently(prefix, len, NULL, path);
|
|
if (!r)
|
|
die("'%s' is outside repository", path);
|
|
return r;
|
|
}
|
|
|
|
int path_inside_repo(const char *prefix, const char *path)
|
|
{
|
|
int len = prefix ? strlen(prefix) : 0;
|
|
char *r = prefix_path_gently(prefix, len, NULL, path);
|
|
if (r) {
|
|
free(r);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int check_filename(const char *prefix, const char *arg)
|
|
{
|
|
const char *name;
|
|
struct stat st;
|
|
|
|
if (starts_with(arg, ":/")) {
|
|
if (arg[2] == '\0') /* ":/" is root dir, always exists */
|
|
return 1;
|
|
name = arg + 2;
|
|
} else if (prefix)
|
|
name = prefix_filename(prefix, strlen(prefix), arg);
|
|
else
|
|
name = arg;
|
|
if (!lstat(name, &st))
|
|
return 1; /* file exists */
|
|
if (errno == ENOENT || errno == ENOTDIR)
|
|
return 0; /* file does not exist */
|
|
die_errno("failed to stat '%s'", arg);
|
|
}
|
|
|
|
static void NORETURN die_verify_filename(const char *prefix,
|
|
const char *arg,
|
|
int diagnose_misspelt_rev)
|
|
{
|
|
if (!diagnose_misspelt_rev)
|
|
die("%s: no such path in the working tree.\n"
|
|
"Use 'git <command> -- <path>...' to specify paths that do not exist locally.",
|
|
arg);
|
|
/*
|
|
* Saying "'(icase)foo' does not exist in the index" when the
|
|
* user gave us ":(icase)foo" is just stupid. A magic pathspec
|
|
* begins with a colon and is followed by a non-alnum; do not
|
|
* let maybe_die_on_misspelt_object_name() even trigger.
|
|
*/
|
|
if (!(arg[0] == ':' && !isalnum(arg[1])))
|
|
maybe_die_on_misspelt_object_name(arg, prefix);
|
|
|
|
/* ... or fall back the most general message. */
|
|
die("ambiguous argument '%s': unknown revision or path not in the working tree.\n"
|
|
"Use '--' to separate paths from revisions, like this:\n"
|
|
"'git <command> [<revision>...] -- [<file>...]'", arg);
|
|
|
|
}
|
|
|
|
/*
|
|
* Verify a filename that we got as an argument for a pathspec
|
|
* entry. Note that a filename that begins with "-" never verifies
|
|
* as true, because even if such a filename were to exist, we want
|
|
* it to be preceded by the "--" marker (or we want the user to
|
|
* use a format like "./-filename")
|
|
*
|
|
* The "diagnose_misspelt_rev" is used to provide a user-friendly
|
|
* diagnosis when dying upon finding that "name" is not a pathname.
|
|
* If set to 1, the diagnosis will try to diagnose "name" as an
|
|
* invalid object name (e.g. HEAD:foo). If set to 0, the diagnosis
|
|
* will only complain about an inexisting file.
|
|
*
|
|
* This function is typically called to check that a "file or rev"
|
|
* argument is unambiguous. In this case, the caller will want
|
|
* diagnose_misspelt_rev == 1 when verifying the first non-rev
|
|
* argument (which could have been a revision), and
|
|
* diagnose_misspelt_rev == 0 for the next ones (because we already
|
|
* saw a filename, there's not ambiguity anymore).
|
|
*/
|
|
void verify_filename(const char *prefix,
|
|
const char *arg,
|
|
int diagnose_misspelt_rev)
|
|
{
|
|
if (*arg == '-')
|
|
die("bad flag '%s' used after filename", arg);
|
|
if (check_filename(prefix, arg) || !no_wildcard(arg))
|
|
return;
|
|
die_verify_filename(prefix, arg, diagnose_misspelt_rev);
|
|
}
|
|
|
|
/*
|
|
* Opposite of the above: the command line did not have -- marker
|
|
* and we parsed the arg as a refname. It should not be interpretable
|
|
* as a filename.
|
|
*/
|
|
void verify_non_filename(const char *prefix, const char *arg)
|
|
{
|
|
if (!is_inside_work_tree() || is_inside_git_dir())
|
|
return;
|
|
if (*arg == '-')
|
|
return; /* flag */
|
|
if (!check_filename(prefix, arg))
|
|
return;
|
|
die("ambiguous argument '%s': both revision and filename\n"
|
|
"Use '--' to separate paths from revisions, like this:\n"
|
|
"'git <command> [<revision>...] -- [<file>...]'", arg);
|
|
}
|
|
|
|
|
|
/*
|
|
* Test if it looks like we're at a git directory.
|
|
* We want to see:
|
|
*
|
|
* - either an objects/ directory _or_ the proper
|
|
* GIT_OBJECT_DIRECTORY environment variable
|
|
* - a refs/ directory
|
|
* - either a HEAD symlink or a HEAD file that is formatted as
|
|
* a proper "ref:", or a regular file HEAD that has a properly
|
|
* formatted sha1 object name.
|
|
*/
|
|
int is_git_directory(const char *suspect)
|
|
{
|
|
char path[PATH_MAX];
|
|
size_t len = strlen(suspect);
|
|
|
|
if (PATH_MAX <= len + strlen("/objects"))
|
|
die("Too long path: %.*s", 60, suspect);
|
|
strcpy(path, suspect);
|
|
if (getenv(DB_ENVIRONMENT)) {
|
|
if (access(getenv(DB_ENVIRONMENT), X_OK))
|
|
return 0;
|
|
}
|
|
else {
|
|
strcpy(path + len, "/objects");
|
|
if (access(path, X_OK))
|
|
return 0;
|
|
}
|
|
|
|
strcpy(path + len, "/refs");
|
|
if (access(path, X_OK))
|
|
return 0;
|
|
|
|
strcpy(path + len, "/HEAD");
|
|
if (validate_headref(path))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
int is_inside_git_dir(void)
|
|
{
|
|
if (inside_git_dir < 0)
|
|
inside_git_dir = is_inside_dir(get_git_dir());
|
|
return inside_git_dir;
|
|
}
|
|
|
|
int is_inside_work_tree(void)
|
|
{
|
|
if (inside_work_tree < 0)
|
|
inside_work_tree = is_inside_dir(get_git_work_tree());
|
|
return inside_work_tree;
|
|
}
|
|
|
|
void setup_work_tree(void)
|
|
{
|
|
const char *work_tree, *git_dir;
|
|
static int initialized = 0;
|
|
|
|
if (initialized)
|
|
return;
|
|
work_tree = get_git_work_tree();
|
|
git_dir = get_git_dir();
|
|
if (!is_absolute_path(git_dir))
|
|
git_dir = real_path(get_git_dir());
|
|
if (!work_tree || chdir(work_tree))
|
|
die("This operation must be run in a work tree");
|
|
|
|
/*
|
|
* Make sure subsequent git processes find correct worktree
|
|
* if $GIT_WORK_TREE is set relative
|
|
*/
|
|
if (getenv(GIT_WORK_TREE_ENVIRONMENT))
|
|
setenv(GIT_WORK_TREE_ENVIRONMENT, ".", 1);
|
|
|
|
set_git_dir(remove_leading_path(git_dir, work_tree));
|
|
initialized = 1;
|
|
}
|
|
|
|
static int check_repository_format_gently(const char *gitdir, int *nongit_ok)
|
|
{
|
|
char repo_config[PATH_MAX+1];
|
|
|
|
/*
|
|
* git_config() can't be used here because it calls git_pathdup()
|
|
* to get $GIT_CONFIG/config. That call will make setup_git_env()
|
|
* set git_dir to ".git".
|
|
*
|
|
* We are in gitdir setup, no git dir has been found useable yet.
|
|
* Use a gentler version of git_config() to check if this repo
|
|
* is a good one.
|
|
*/
|
|
snprintf(repo_config, PATH_MAX, "%s/config", gitdir);
|
|
git_config_early(check_repository_format_version, NULL, repo_config);
|
|
if (GIT_REPO_VERSION < repository_format_version) {
|
|
if (!nongit_ok)
|
|
die ("Expected git repo version <= %d, found %d",
|
|
GIT_REPO_VERSION, repository_format_version);
|
|
warning("Expected git repo version <= %d, found %d",
|
|
GIT_REPO_VERSION, repository_format_version);
|
|
warning("Please upgrade Git");
|
|
*nongit_ok = -1;
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Try to read the location of the git directory from the .git file,
|
|
* return path to git directory if found.
|
|
*/
|
|
const char *read_gitfile(const char *path)
|
|
{
|
|
char *buf;
|
|
char *dir;
|
|
const char *slash;
|
|
struct stat st;
|
|
int fd;
|
|
ssize_t len;
|
|
|
|
if (stat(path, &st))
|
|
return NULL;
|
|
if (!S_ISREG(st.st_mode))
|
|
return NULL;
|
|
fd = open(path, O_RDONLY);
|
|
if (fd < 0)
|
|
die_errno("Error opening '%s'", path);
|
|
buf = xmalloc(st.st_size + 1);
|
|
len = read_in_full(fd, buf, st.st_size);
|
|
close(fd);
|
|
if (len != st.st_size)
|
|
die("Error reading %s", path);
|
|
buf[len] = '\0';
|
|
if (!starts_with(buf, "gitdir: "))
|
|
die("Invalid gitfile format: %s", path);
|
|
while (buf[len - 1] == '\n' || buf[len - 1] == '\r')
|
|
len--;
|
|
if (len < 9)
|
|
die("No path in gitfile: %s", path);
|
|
buf[len] = '\0';
|
|
dir = buf + 8;
|
|
|
|
if (!is_absolute_path(dir) && (slash = strrchr(path, '/'))) {
|
|
size_t pathlen = slash+1 - path;
|
|
size_t dirlen = pathlen + len - 8;
|
|
dir = xmalloc(dirlen + 1);
|
|
strncpy(dir, path, pathlen);
|
|
strncpy(dir + pathlen, buf + 8, len - 8);
|
|
dir[dirlen] = '\0';
|
|
free(buf);
|
|
buf = dir;
|
|
}
|
|
|
|
if (!is_git_directory(dir))
|
|
die("Not a git repository: %s", dir);
|
|
path = real_path(dir);
|
|
|
|
free(buf);
|
|
return path;
|
|
}
|
|
|
|
static const char *setup_explicit_git_dir(const char *gitdirenv,
|
|
struct strbuf *cwd,
|
|
int *nongit_ok)
|
|
{
|
|
const char *work_tree_env = getenv(GIT_WORK_TREE_ENVIRONMENT);
|
|
const char *worktree;
|
|
char *gitfile;
|
|
int offset;
|
|
|
|
if (PATH_MAX - 40 < strlen(gitdirenv))
|
|
die("'$%s' too big", GIT_DIR_ENVIRONMENT);
|
|
|
|
gitfile = (char*)read_gitfile(gitdirenv);
|
|
if (gitfile) {
|
|
gitfile = xstrdup(gitfile);
|
|
gitdirenv = gitfile;
|
|
}
|
|
|
|
if (!is_git_directory(gitdirenv)) {
|
|
if (nongit_ok) {
|
|
*nongit_ok = 1;
|
|
free(gitfile);
|
|
return NULL;
|
|
}
|
|
die("Not a git repository: '%s'", gitdirenv);
|
|
}
|
|
|
|
if (check_repository_format_gently(gitdirenv, nongit_ok)) {
|
|
free(gitfile);
|
|
return NULL;
|
|
}
|
|
|
|
/* #3, #7, #11, #15, #19, #23, #27, #31 (see t1510) */
|
|
if (work_tree_env)
|
|
set_git_work_tree(work_tree_env);
|
|
else if (is_bare_repository_cfg > 0) {
|
|
if (git_work_tree_cfg) /* #22.2, #30 */
|
|
die("core.bare and core.worktree do not make sense");
|
|
|
|
/* #18, #26 */
|
|
set_git_dir(gitdirenv);
|
|
free(gitfile);
|
|
return NULL;
|
|
}
|
|
else if (git_work_tree_cfg) { /* #6, #14 */
|
|
if (is_absolute_path(git_work_tree_cfg))
|
|
set_git_work_tree(git_work_tree_cfg);
|
|
else {
|
|
char *core_worktree;
|
|
if (chdir(gitdirenv))
|
|
die_errno("Could not chdir to '%s'", gitdirenv);
|
|
if (chdir(git_work_tree_cfg))
|
|
die_errno("Could not chdir to '%s'", git_work_tree_cfg);
|
|
core_worktree = xgetcwd();
|
|
if (chdir(cwd->buf))
|
|
die_errno("Could not come back to cwd");
|
|
set_git_work_tree(core_worktree);
|
|
free(core_worktree);
|
|
}
|
|
}
|
|
else if (!git_env_bool(GIT_IMPLICIT_WORK_TREE_ENVIRONMENT, 1)) {
|
|
/* #16d */
|
|
set_git_dir(gitdirenv);
|
|
free(gitfile);
|
|
return NULL;
|
|
}
|
|
else /* #2, #10 */
|
|
set_git_work_tree(".");
|
|
|
|
/* set_git_work_tree() must have been called by now */
|
|
worktree = get_git_work_tree();
|
|
|
|
/* both get_git_work_tree() and cwd are already normalized */
|
|
if (!strcmp(cwd->buf, worktree)) { /* cwd == worktree */
|
|
set_git_dir(gitdirenv);
|
|
free(gitfile);
|
|
return NULL;
|
|
}
|
|
|
|
offset = dir_inside_of(cwd->buf, worktree);
|
|
if (offset >= 0) { /* cwd inside worktree? */
|
|
set_git_dir(real_path(gitdirenv));
|
|
if (chdir(worktree))
|
|
die_errno("Could not chdir to '%s'", worktree);
|
|
strbuf_addch(cwd, '/');
|
|
free(gitfile);
|
|
return cwd->buf + offset;
|
|
}
|
|
|
|
/* cwd outside worktree */
|
|
set_git_dir(gitdirenv);
|
|
free(gitfile);
|
|
return NULL;
|
|
}
|
|
|
|
static const char *setup_discovered_git_dir(const char *gitdir,
|
|
struct strbuf *cwd, int offset,
|
|
int *nongit_ok)
|
|
{
|
|
if (check_repository_format_gently(gitdir, nongit_ok))
|
|
return NULL;
|
|
|
|
/* --work-tree is set without --git-dir; use discovered one */
|
|
if (getenv(GIT_WORK_TREE_ENVIRONMENT) || git_work_tree_cfg) {
|
|
if (offset != cwd->len && !is_absolute_path(gitdir))
|
|
gitdir = xstrdup(real_path(gitdir));
|
|
if (chdir(cwd->buf))
|
|
die_errno("Could not come back to cwd");
|
|
return setup_explicit_git_dir(gitdir, cwd, nongit_ok);
|
|
}
|
|
|
|
/* #16.2, #17.2, #20.2, #21.2, #24, #25, #28, #29 (see t1510) */
|
|
if (is_bare_repository_cfg > 0) {
|
|
set_git_dir(offset == cwd->len ? gitdir : real_path(gitdir));
|
|
if (chdir(cwd->buf))
|
|
die_errno("Could not come back to cwd");
|
|
return NULL;
|
|
}
|
|
|
|
/* #0, #1, #5, #8, #9, #12, #13 */
|
|
set_git_work_tree(".");
|
|
if (strcmp(gitdir, DEFAULT_GIT_DIR_ENVIRONMENT))
|
|
set_git_dir(gitdir);
|
|
inside_git_dir = 0;
|
|
inside_work_tree = 1;
|
|
if (offset == cwd->len)
|
|
return NULL;
|
|
|
|
/* Make "offset" point to past the '/', and add a '/' at the end */
|
|
offset++;
|
|
strbuf_addch(cwd, '/');
|
|
return cwd->buf + offset;
|
|
}
|
|
|
|
/* #16.1, #17.1, #20.1, #21.1, #22.1 (see t1510) */
|
|
static const char *setup_bare_git_dir(struct strbuf *cwd, int offset,
|
|
int *nongit_ok)
|
|
{
|
|
int root_len;
|
|
|
|
if (check_repository_format_gently(".", nongit_ok))
|
|
return NULL;
|
|
|
|
setenv(GIT_IMPLICIT_WORK_TREE_ENVIRONMENT, "0", 1);
|
|
|
|
/* --work-tree is set without --git-dir; use discovered one */
|
|
if (getenv(GIT_WORK_TREE_ENVIRONMENT) || git_work_tree_cfg) {
|
|
const char *gitdir;
|
|
|
|
gitdir = offset == cwd->len ? "." : xmemdupz(cwd->buf, offset);
|
|
if (chdir(cwd->buf))
|
|
die_errno("Could not come back to cwd");
|
|
return setup_explicit_git_dir(gitdir, cwd, nongit_ok);
|
|
}
|
|
|
|
inside_git_dir = 1;
|
|
inside_work_tree = 0;
|
|
if (offset != cwd->len) {
|
|
if (chdir(cwd->buf))
|
|
die_errno("Cannot come back to cwd");
|
|
root_len = offset_1st_component(cwd->buf);
|
|
strbuf_setlen(cwd, offset > root_len ? offset : root_len);
|
|
set_git_dir(cwd->buf);
|
|
}
|
|
else
|
|
set_git_dir(".");
|
|
return NULL;
|
|
}
|
|
|
|
static const char *setup_nongit(const char *cwd, int *nongit_ok)
|
|
{
|
|
if (!nongit_ok)
|
|
die("Not a git repository (or any of the parent directories): %s", DEFAULT_GIT_DIR_ENVIRONMENT);
|
|
if (chdir(cwd))
|
|
die_errno("Cannot come back to cwd");
|
|
*nongit_ok = 1;
|
|
return NULL;
|
|
}
|
|
|
|
static dev_t get_device_or_die(const char *path, const char *prefix, int prefix_len)
|
|
{
|
|
struct stat buf;
|
|
if (stat(path, &buf)) {
|
|
die_errno("failed to stat '%*s%s%s'",
|
|
prefix_len,
|
|
prefix ? prefix : "",
|
|
prefix ? "/" : "", path);
|
|
}
|
|
return buf.st_dev;
|
|
}
|
|
|
|
/*
|
|
* A "string_list_each_func_t" function that canonicalizes an entry
|
|
* from GIT_CEILING_DIRECTORIES using real_path_if_valid(), or
|
|
* discards it if unusable. The presence of an empty entry in
|
|
* GIT_CEILING_DIRECTORIES turns off canonicalization for all
|
|
* subsequent entries.
|
|
*/
|
|
static int canonicalize_ceiling_entry(struct string_list_item *item,
|
|
void *cb_data)
|
|
{
|
|
int *empty_entry_found = cb_data;
|
|
char *ceil = item->string;
|
|
|
|
if (!*ceil) {
|
|
*empty_entry_found = 1;
|
|
return 0;
|
|
} else if (!is_absolute_path(ceil)) {
|
|
return 0;
|
|
} else if (*empty_entry_found) {
|
|
/* Keep entry but do not canonicalize it */
|
|
return 1;
|
|
} else {
|
|
const char *real_path = real_path_if_valid(ceil);
|
|
if (!real_path)
|
|
return 0;
|
|
free(item->string);
|
|
item->string = xstrdup(real_path);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* We cannot decide in this function whether we are in the work tree or
|
|
* not, since the config can only be read _after_ this function was called.
|
|
*/
|
|
static const char *setup_git_directory_gently_1(int *nongit_ok)
|
|
{
|
|
const char *env_ceiling_dirs = getenv(CEILING_DIRECTORIES_ENVIRONMENT);
|
|
struct string_list ceiling_dirs = STRING_LIST_INIT_DUP;
|
|
static struct strbuf cwd = STRBUF_INIT;
|
|
const char *gitdirenv, *ret;
|
|
char *gitfile;
|
|
int offset, offset_parent, ceil_offset = -1;
|
|
dev_t current_device = 0;
|
|
int one_filesystem = 1;
|
|
|
|
/*
|
|
* We may have read an incomplete configuration before
|
|
* setting-up the git directory. If so, clear the cache so
|
|
* that the next queries to the configuration reload complete
|
|
* configuration (including the per-repo config file that we
|
|
* ignored previously).
|
|
*/
|
|
git_config_clear();
|
|
|
|
/*
|
|
* Let's assume that we are in a git repository.
|
|
* If it turns out later that we are somewhere else, the value will be
|
|
* updated accordingly.
|
|
*/
|
|
if (nongit_ok)
|
|
*nongit_ok = 0;
|
|
|
|
if (strbuf_getcwd(&cwd))
|
|
die_errno("Unable to read current working directory");
|
|
offset = cwd.len;
|
|
|
|
/*
|
|
* If GIT_DIR is set explicitly, we're not going
|
|
* to do any discovery, but we still do repository
|
|
* validation.
|
|
*/
|
|
gitdirenv = getenv(GIT_DIR_ENVIRONMENT);
|
|
if (gitdirenv)
|
|
return setup_explicit_git_dir(gitdirenv, &cwd, nongit_ok);
|
|
|
|
if (env_ceiling_dirs) {
|
|
int empty_entry_found = 0;
|
|
|
|
string_list_split(&ceiling_dirs, env_ceiling_dirs, PATH_SEP, -1);
|
|
filter_string_list(&ceiling_dirs, 0,
|
|
canonicalize_ceiling_entry, &empty_entry_found);
|
|
ceil_offset = longest_ancestor_length(cwd.buf, &ceiling_dirs);
|
|
string_list_clear(&ceiling_dirs, 0);
|
|
}
|
|
|
|
if (ceil_offset < 0 && has_dos_drive_prefix(cwd.buf))
|
|
ceil_offset = 1;
|
|
|
|
/*
|
|
* Test in the following order (relative to the cwd):
|
|
* - .git (file containing "gitdir: <path>")
|
|
* - .git/
|
|
* - ./ (bare)
|
|
* - ../.git
|
|
* - ../.git/
|
|
* - ../ (bare)
|
|
* - ../../.git/
|
|
* etc.
|
|
*/
|
|
one_filesystem = !git_env_bool("GIT_DISCOVERY_ACROSS_FILESYSTEM", 0);
|
|
if (one_filesystem)
|
|
current_device = get_device_or_die(".", NULL, 0);
|
|
for (;;) {
|
|
gitfile = (char*)read_gitfile(DEFAULT_GIT_DIR_ENVIRONMENT);
|
|
if (gitfile)
|
|
gitdirenv = gitfile = xstrdup(gitfile);
|
|
else {
|
|
if (is_git_directory(DEFAULT_GIT_DIR_ENVIRONMENT))
|
|
gitdirenv = DEFAULT_GIT_DIR_ENVIRONMENT;
|
|
}
|
|
|
|
if (gitdirenv) {
|
|
ret = setup_discovered_git_dir(gitdirenv,
|
|
&cwd, offset,
|
|
nongit_ok);
|
|
free(gitfile);
|
|
return ret;
|
|
}
|
|
free(gitfile);
|
|
|
|
if (is_git_directory("."))
|
|
return setup_bare_git_dir(&cwd, offset, nongit_ok);
|
|
|
|
offset_parent = offset;
|
|
while (--offset_parent > ceil_offset && cwd.buf[offset_parent] != '/');
|
|
if (offset_parent <= ceil_offset)
|
|
return setup_nongit(cwd.buf, nongit_ok);
|
|
if (one_filesystem) {
|
|
dev_t parent_device = get_device_or_die("..", cwd.buf,
|
|
offset);
|
|
if (parent_device != current_device) {
|
|
if (nongit_ok) {
|
|
if (chdir(cwd.buf))
|
|
die_errno("Cannot come back to cwd");
|
|
*nongit_ok = 1;
|
|
return NULL;
|
|
}
|
|
strbuf_setlen(&cwd, offset);
|
|
die("Not a git repository (or any parent up to mount point %s)\n"
|
|
"Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).",
|
|
cwd.buf);
|
|
}
|
|
}
|
|
if (chdir("..")) {
|
|
strbuf_setlen(&cwd, offset);
|
|
die_errno("Cannot change to '%s/..'", cwd.buf);
|
|
}
|
|
offset = offset_parent;
|
|
}
|
|
}
|
|
|
|
const char *setup_git_directory_gently(int *nongit_ok)
|
|
{
|
|
const char *prefix;
|
|
|
|
prefix = setup_git_directory_gently_1(nongit_ok);
|
|
if (prefix)
|
|
setenv(GIT_PREFIX_ENVIRONMENT, prefix, 1);
|
|
else
|
|
setenv(GIT_PREFIX_ENVIRONMENT, "", 1);
|
|
|
|
if (startup_info) {
|
|
startup_info->have_repository = !nongit_ok || !*nongit_ok;
|
|
startup_info->prefix = prefix;
|
|
}
|
|
return prefix;
|
|
}
|
|
|
|
int git_config_perm(const char *var, const char *value)
|
|
{
|
|
int i;
|
|
char *endptr;
|
|
|
|
if (value == NULL)
|
|
return PERM_GROUP;
|
|
|
|
if (!strcmp(value, "umask"))
|
|
return PERM_UMASK;
|
|
if (!strcmp(value, "group"))
|
|
return PERM_GROUP;
|
|
if (!strcmp(value, "all") ||
|
|
!strcmp(value, "world") ||
|
|
!strcmp(value, "everybody"))
|
|
return PERM_EVERYBODY;
|
|
|
|
/* Parse octal numbers */
|
|
i = strtol(value, &endptr, 8);
|
|
|
|
/* If not an octal number, maybe true/false? */
|
|
if (*endptr != 0)
|
|
return git_config_bool(var, value) ? PERM_GROUP : PERM_UMASK;
|
|
|
|
/*
|
|
* Treat values 0, 1 and 2 as compatibility cases, otherwise it is
|
|
* a chmod value to restrict to.
|
|
*/
|
|
switch (i) {
|
|
case PERM_UMASK: /* 0 */
|
|
return PERM_UMASK;
|
|
case OLD_PERM_GROUP: /* 1 */
|
|
return PERM_GROUP;
|
|
case OLD_PERM_EVERYBODY: /* 2 */
|
|
return PERM_EVERYBODY;
|
|
}
|
|
|
|
/* A filemode value was given: 0xxx */
|
|
|
|
if ((i & 0600) != 0600)
|
|
die("Problem with core.sharedRepository filemode value "
|
|
"(0%.3o).\nThe owner of files must always have "
|
|
"read and write permissions.", i);
|
|
|
|
/*
|
|
* Mask filemode value. Others can not get write permission.
|
|
* x flags for directories are handled separately.
|
|
*/
|
|
return -(i & 0666);
|
|
}
|
|
|
|
int check_repository_format_version(const char *var, const char *value, void *cb)
|
|
{
|
|
if (strcmp(var, "core.repositoryformatversion") == 0)
|
|
repository_format_version = git_config_int(var, value);
|
|
else if (strcmp(var, "core.sharedrepository") == 0)
|
|
shared_repository = git_config_perm(var, value);
|
|
else if (strcmp(var, "core.bare") == 0) {
|
|
is_bare_repository_cfg = git_config_bool(var, value);
|
|
if (is_bare_repository_cfg == 1)
|
|
inside_work_tree = -1;
|
|
} else if (strcmp(var, "core.worktree") == 0) {
|
|
if (!value)
|
|
return config_error_nonbool(var);
|
|
free(git_work_tree_cfg);
|
|
git_work_tree_cfg = xstrdup(value);
|
|
inside_work_tree = -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int check_repository_format(void)
|
|
{
|
|
return check_repository_format_gently(get_git_dir(), NULL);
|
|
}
|
|
|
|
/*
|
|
* Returns the "prefix", a path to the current working directory
|
|
* relative to the work tree root, or NULL, if the current working
|
|
* directory is not a strict subdirectory of the work tree root. The
|
|
* prefix always ends with a '/' character.
|
|
*/
|
|
const char *setup_git_directory(void)
|
|
{
|
|
return setup_git_directory_gently(NULL);
|
|
}
|
|
|
|
const char *resolve_gitdir(const char *suspect)
|
|
{
|
|
if (is_git_directory(suspect))
|
|
return suspect;
|
|
return read_gitfile(suspect);
|
|
}
|
|
|
|
/* if any standard file descriptor is missing open it to /dev/null */
|
|
void sanitize_stdfds(void)
|
|
{
|
|
int fd = open("/dev/null", O_RDWR, 0);
|
|
while (fd != -1 && fd < 2)
|
|
fd = dup(fd);
|
|
if (fd == -1)
|
|
die_errno("open /dev/null or dup failed");
|
|
if (fd > 2)
|
|
close(fd);
|
|
}
|
|
|
|
int daemonize(void)
|
|
{
|
|
#ifdef NO_POSIX_GOODIES
|
|
errno = ENOSYS;
|
|
return -1;
|
|
#else
|
|
switch (fork()) {
|
|
case 0:
|
|
break;
|
|
case -1:
|
|
die_errno("fork failed");
|
|
default:
|
|
exit(0);
|
|
}
|
|
if (setsid() == -1)
|
|
die_errno("setsid failed");
|
|
close(0);
|
|
close(1);
|
|
close(2);
|
|
sanitize_stdfds();
|
|
return 0;
|
|
#endif
|
|
}
|