In cfaff3aac (branch -m: allow renaming a yet-unborn branch, 2020-12-13)
we added support for renaming an orphan branch when that branch is
checked out in the current worktree.
Let's also allow renaming an orphan branch checked out in a worktree
different than the current one.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bcfc82bd48 (branch: description for non-existent branch errors,
2022-10-08) we checked the HEAD in the current worktree to detect if the
branch to operate with is an orphan branch, so as to avoid the confusing
error: "No branch named...".
If we are asked to operate with an orphan branch in a different working
tree than the current one, we need to check the HEAD in that different
working tree.
Let's extend the check we did in bcfc82bd48, to check the HEADs in all
worktrees linked to the current repository, using the helper introduced
in 31ad6b61bd (branch: add branch_checked_out() helper, 2022-06-15).
The helper, branch_checked_out(), does its work obtaining internally a
list of worktrees linked to the current repository. Obtaining that list
is not a lightweight work because it implies disk access.
In copy_or_rename_branch() we already have a list of worktrees. Let's
use that already obtained list, and avoid using here the helper.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we introduced replace_each_worktree_head_symref() in 70999e9cec
(branch -m: update all per-worktree HEADs, 2016-03-27), we implemented a
best effort approach.
If we are asked to rename a branch that is simultaneously checked out in
multiple worktrees, we try to update all of those worktrees. If we fail
updating any of them, we die() as a signal that something has gone
wrong. However, at this point, the branch ref has already been renamed
and also updated the HEADs of the successfully updated worktrees.
Despite returning an error, we do not try to rollback those changes.
Let's add a test to notice if we change this behavior in the future.
In next commits we will change replace_each_worktree_head_symref() to
work more closely with its only caller, copy_or_rename_branch(). Let's
move the former closer to its caller, to facilitate those changes.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of the new option is to accommodate users who would like
--rebase-merges to be on by default and to facilitate turning on
--rebase-merges by default without configuration in a future version of
Git.
Name the new option rebase.rebaseMerges, even though it is a little
redundant, for consistency with the name of the command line option and
to be clear when scrolling through values in the [rebase] section of
.gitconfig.
Support setting rebase.rebaseMerges to the nonspecific value "true" for
users who don't need to or don't want to learn about the difference
between rebase-cousins and no-rebase-cousins.
Make --rebase-merges without an argument on the command line override
any value of rebase.rebaseMerges in the configuration, for consistency
with other command line flags with optional arguments that have an
associated config option.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As far as I can tell, --no-rebase-merges has always worked, but has
never been documented. It is especially important to document it before
a rebase.rebaseMerges option is introduced so that users know how to
override the config option on the command line. It's also important to
clarify that --rebase-merges without an argument is not the same as
--no-rebase-merges and not passing --rebase-merges is not the same as
passing --rebase-merges=no-rebase-cousins.
A test case is necessary to make sure that --no-rebase-merges keeps
working after its code is refactored in the following patches of this
series. The test case is a little contrived: It's unlikely that a user
would type both --rebase-merges and --no-rebase-merges at the same time.
However, if an alias is defined which includes --rebase-merges, the user
might decide to add --no-rebase-merges to countermand that part of the
alias but leave alone other flags set by the alias.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fd2da4b1ea (archive: add --mtime, 2023-02-18) added a helper function
for checking the file modification time of an extracted entry. Use it
for the older mtime test as well to shorten the code and piggyback on
the archive extraction done to validate file contents.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git archive is started in a subdirectory, it archives its
corresponding tree and its child objects, only. That is intended. It
does that by effectively cd'ing into that tree and setting "prefix" to
the empty string.
This has unfortunate consequences, though: Attributes are anchored at
the root of the repository and git archive still applies them to
subtrees, causing mismatches. And when checking pathspecs it cannot
tell the difference between one that doesn't match anthing or one that
matches some actual blob outside of the subdirectory, leading to a
confusing error message.
Fix that by keeping the "prefix" value and passing it to pathspec and
attribute functions, and shortening it using relative_path() for paths
written to the archive and (if --verbose is given) to stdout.
Still reject attempts to archive files outside the current directory,
but print a more specific error in that case. Recognizing it requires a
full traversal of the subtree for each pathspec, however. Allowing them
would be easier, but archive entry paths starting with "../" can be
problematic to extract -- e.g. bsdtar skips them by default.
Reported-by: Cristian Le <cristian.le@mpsd.mpg.de>
Reported-by: Matthias Görgens <matthias.goergens@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --contents option can be used with git blame to blame the file as if
it had the contents from the specified file. This is akin to copying the
contents into the working tree and then running git blame. This option
has been supported since 1cfe77333f ("git-blame: no rev means start
from the working tree file.")
The --contents option always blames the file as if it was based on the
current HEAD commit. If you try to pass a revision while using
--contents, you get the following error:
fatal: cannot use --contents with final commit object name
This is because the blame process generates a fake working tree commit
which always uses the HEAD object as its sole parent.
Enhance fake_working_tree_commit to take the object ID to use for the
parent instead of always using the HEAD object. Then, always generate a
fake commit when we have contents provided, even if we have a final
object. Remove the check to disallow --contents and a final revision.
Note that the behavior of generating a fake working commit is still
skipped when a revision is provided but --contents is not provided.
Generating such a commit in that case would combine the currently
checked out file contents with the provided revision, which breaks
normal blame behavior and produces unexpected results.
This enables use of --contents with an arbitrary revision, rather than
forcing the use of the local HEAD commit. This makes the --contents
option significantly more flexible, as it is no longer required to check
out the working tree to the desired commit before using --contents.
Reword the documentation so that its clear that --contents can be used
with <rev>.
Add tests for the --contents option to the annotate-tests.sh test
script.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we handle an --anonymize-map option, we parse the orig/anon pair,
and then feed the "orig" string to anonymize_str(), along with a
generator function that duplicates the "anon" string to be cached in the
map.
This works, because anonymize_str() says "ah, there is no mapping yet
for orig; I'll add one from the generator". But there are some
downsides:
1. It's a bit too clever, as it's not obvious what the code is trying
to do or why it works.
2. It requires allowing generator functions to take an extra void
pointer, which is not something any of the normal callers of
anonymize_str() want.
3. It does the wrong thing if the same token is provided twice.
When there are conflicting options, like:
git fast-export --anonymize \
--anonymize-map=foo:one \
--anonymize-map=foo:two
we usually let the second one override the first. But by using
anonymize_str(), which has first-one-wins logic, we do the
opposite.
So instead of relying on anonymize_str(), let's directly add the entry
ourselves. We can tweak the tests to show that we handle overridden
options correctly now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix for a "ls-files --format="%(path)" that produced nonsense
output, which was a bug in 2.38.
* aj/ls-files-format-fix:
ls-files: fix "--format" output of relative paths
"git format-patch" honors the src/dst prefixes set to nonstandard
values with configuration variables like "diff.noprefix", causing
receiving end of the patch that expects the standard -p1 format to
break. Teach "format-patch" to ignore end-user configuration and
always use the standard prefixes.
This is a backward compatibility breaking change.
* jk/format-patch-ignore-noprefix:
rebase: prefer --default-prefix to --{src,dst}-prefix for format-patch
format-patch: add format.noprefix option
format-patch: do not respect diff.noprefix
diff: add --default-prefix option
t4013: add tests for diff prefix options
diff: factor out src/dst prefix setup
By moving several declarations to setup.h, the previous patch made it
possible to remove the include of cache.h in several source files. Do
so.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last several commits were geared at replacing the include of cache.h
in strbuf.c with an include of git-compat-util.h. Unfortunately, I had
to drop a patch moving some functions from cache.h to object-name.h, due
to excessive conflicts with other in-flight topics.
However, even without that patch, the series of patches so far allows us
to modify a number of C files to replace an include of cache.h with
git-compat-util.h. Do that to reduce our dependencies.
(If we could have kept our object-name.h patch in this series, it would
have also let us reduce the includes in checkout.c and fmt-merge-msg.c
in addition to strbuf.c).
Just to ensure that nothing else was bringing in cache.h, all of the
affected files have been checked to ensure that
gcc -E -I. $SOURCE_FILE | grep '"cache.h"'
found no hits and that
make DEVELOPER=1 ${OBJECT_FILE_FOR_SOURCE_FILE}
successfully compiles without warnings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A number of files were apparently including cache.h solely to get
gettext.h. By making those files explicitly include gettext.h, we can
already drop the include of cache.h in these files. On top of that,
there were some files using cache.h that didn't need to for any reason.
Remove these unnecessary includes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Looking at things from the opposite angle of the last patch, we had a
few files that were including gettext.h and perhaps needed it at some
point in history, but no longer require it. Remove the include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since a64215b6cd ("object.h: stop depending on cache.h; make
cache.h depend on object.h", 2023-02-24), we have a few headers that
could have replaced their include of cache.h with an include of
object.h. Make that change now.
Some C files had to start including cache.h after this change (or some
smaller header it had brought in), because the C files were depending
on things from cache.h but were only formerly implicitly getting
cache.h through one of these headers being modified in this patch.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both 'git for-each-ref --merged=<X>' and 'git branch --merged=<X>' use
the ref-filter machinery to select references or branches (respectively)
that are reachable from a set of commits presented by one or more
--merged arguments. This happens within reach_filter(), which uses the
revision-walk machinery to walk history in a standard way.
However, the commit-reach.c file is full of custom searches that are
more efficient, especially for reachability queries that can terminate
early when reachability is discovered. Add a new
tips_reachable_from_bases() method to commit-reach.c and call it from
within reach_filter() in ref-filter.c. This affects both 'git branch'
and 'git for-each-ref' as tested in p1500-graph-walks.sh.
For the Linux kernel repository, we take an already-fast algorithm and
make it even faster:
Test HEAD~1 HEAD
-------------------------------------------------------------------
1500.5: contains: git for-each-ref --merged 0.13 0.02 -84.6%
1500.6: contains: git branch --merged 0.14 0.02 -85.7%
1500.7: contains: git tag --merged 0.15 0.03 -80.0%
(Note that we remove the iterative 'git rev-list' test from p1500
because it no longer makes sense as a comparison to 'git for-each-ref'
and would just waste time running it for these comparisons.)
The algorithm is implemented in commit-reach.c in the method
tips_reachable_from_base(). This method takes a string_list of tips and
assigns the 'util' for each item with the value 1 if the base commit can
reach those tips.
Like other reachability queries in commit-reach.c, the fastest way to
search for "can A reach B?" is to do a depth-first search up to the
generation number of B, preferring to explore first parents before later
parents. While we must walk all reachable commits up to that generation
number when the answer is "no", the depth-first search can answer "yes"
much faster than other approaches in most cases.
This search becomes trickier when there are multiple targets for the
depth-first search. The commits with lower generation number are more
likely to be within the history of the start commit, but we don't want
to waste time searching commits of low generation number if the commit
target with lowest generation number has already been found.
The trick here is to take the input commits and sort them by generation
number in ascending order. Track the index within this order as
min_generation_index. When we find a commit, if its index in the list is
equal to min_generation_index, then we can increase the generation
number boundary of our search to the next-lowest value in the list.
With this mechanism, the number of commits to search is minimized with
respect to the depth-first search heuristic. We will walk all commits up
to the minimum generation number of a commit that is _not_ reachable
from the start, but we will walk only the necessary portion of the
depth-first search for the reachable commits of lower generation.
Add extra tests for this behavior in t6600-test-reach.sh as the
interesting data shape of that repository can sometimes demonstrate
corner case bugs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change implemented the ahead_behind() method, including an
algorithm to compute the ahead/behind values for a number of commit tips
relative to a number of commit bases. Now, integrate that algorithm as
part of 'git for-each-ref' hidden behind a new format atom,
ahead-behind. This naturally extends to 'git branch' and 'git tag'
builtins, as well.
This format allows specifying multiple bases, if so desired, and all
matching references are compared against all of those bases. For this
reason, failing to read a reference provided from these atoms results in
an error.
In order to translate the ahead_behind() method information to the
format output code in ref-filter.c, we must populate arrays of
ahead_behind_count structs. In struct ref_array, we store the full array
that will be passed to ahead_behind(). In struct ref_array_item, we
store an array of pointers that point to the relvant items within the
full array. In this way, we can pull all relevant ahead/behind values
directly when formatting output for a specific item. It also ensures the
lifetime of the ahead_behind_count structs matches the time that the
array is being used.
Add specific tests of the ahead/behind counts in t6600-test-reach.sh, as
it has an interesting repository shape. In particular, its merging
strategy and its use of different commit-graphs would demonstrate over-
counting if the ahead_behind() method did not already account for that
possibility.
Also add tests for the specific for-each-ref, branch, and tag builtins.
In the case of 'git tag', there are intersting cases that happen when
some of the selected tips are not commits. This requires careful logic
around commits_nr in the second loop of filter_ahead_behind(). Also, the
test in t7004 is carefully located to avoid being dependent on the GPG
prereq. It also avoids using the test_commit helper, as that will add
ticks to the time and disrupt the expected timestamps in later tag
tests.
Also add performance tests in a new p1300-graph-walks.sh script. This
will be useful for more uses in the future, but for now compare the
ahead-behind counting algorithm in 'git for-each-ref' to the naive
implementation by running 'git rev-list --count' processes for each
input.
For the Git source code repository, the improvement is already obvious:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.07(0.07+0.00)
1500.3: ahead-behind counts: git branch 0.07(0.06+0.00)
1500.4: ahead-behind counts: git tag 0.07(0.06+0.00)
1500.5: ahead-behind counts: git rev-list 1.32(1.04+0.27)
But the standard performance benchmark is the Linux kernel repository,
which demosntrates a significant improvement:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.27(0.24+0.02)
1500.3: ahead-behind counts: git branch 0.27(0.24+0.03)
1500.4: ahead-behind counts: git tag 0.28(0.27+0.01)
1500.5: ahead-behind counts: git rev-list 4.57(4.03+0.54)
The 'git rev-list' test exists in this change as a demonstration, but it
will be removed in the next change to avoid wasting time on this
comparison.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit_graph_generation() method used to report a value of
GENERATION_NUMBER_INFINITY if the commit_graph_data_slab had an instance
for the given commit but the graph_pos indicated the commit was not in
the commit-graph file.
However, an upcoming change will introduce the ability to set generation
values in-memory without writing the commit-graph file. Thus, we can no
longer trust 'graph_pos' to indicate whether or not the generation
member can be trusted.
Instead, trust the 'generation' member if the commit has a value in the
slab _and_ the 'generation' member is non-zero. Otherwise, treat it as
GENERATION_NUMBER_INFINITY.
This only makes a difference for a very old case for the commit-graph:
the very first Git release to write commit-graph files wrote zeroes in
the topological level positions. If we are parsing a commit-graph with
all zeroes, those commits will now appear to have
GENERATION_NUMBER_INFINITY (as if they were not parsed from the
commit-graph).
I attempted several variations to work around the need for providing an
uninitialized 'generation' member, but this was the best one I found. It
does require a change to a verification test in t5318 because it reports
a different error than the one about non-zero generation numbers.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for-each-ref builtin can take a list of ref patterns, but if none
match, it still succeeds (but with no output). Add an explicit test that
demonstrates that behavior.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user wishes to input a large list of patterns to 'git
for-each-ref' (likely a long list of exact refs) there are frequently
system limits on the number of command-line arguments.
Add a new --stdin option to instead read the patterns from standard
input. Add tests that check that any unrecognized arguments are
considered an error when --stdin is provided. Also, an empty pattern
list is interpreted as the complete ref set.
When reading from stdin, we populate the filter.name_patterns array
dynamically as opposed to pointing to the 'argv' array directly. This is
simple when using a strvec, as it is NULL-terminated in the same way. We
then free the memory directly from the strvec.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When dowild() cannot match a '*' or '/**/' wildcard then it must return
WM_ABORT_TO_STARSTAR or WM_ABORT_ALL respectively. Failure to observe
this results in unnecessary backtracking and the time taken for a failed
match increases exponentially with the number of wildcards in the
pattern [1]. Unfortunately in some instances dowild() returns WM_NOMATCH
for a failed match resulting in long match times for patterns containing
multiple wildcards as can be seen in the following benchmark.
(Note that the timings in the Benchmark 1 are really measuring the time
to execute test-tool rather than the time to match the pattern)
Benchmark 1: t/helper/test-tool wildmatch wildmatch aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaab "*a"
Time (mean ± σ): 22.8 ms ± 1.7 ms [User: 12.1 ms, System: 10.6 ms]
Range (min … max): 19.4 ms … 26.9 ms 113 runs
Warning: Ignoring non-zero exit code.
Benchmark 2: t/helper/test-tool wildmatch wildmatch aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaab "*a*a*a*a*a*a*a*a*a"
Time (mean ± σ): 5.244 s ± 0.228 s [User: 5.229 s, System: 0.010 s]
Range (min … max): 4.969 s … 5.707 s 10 runs
Warning: Ignoring non-zero exit code.
Summary
't/helper/test-tool wildmatch wildmatch aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaab "*a"' ran
230.37 ± 20.04 times faster than 't/helper/test-tool wildmatch wildmatch aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaab "*a*a*a*a*a*a*a*a*a"'
The security implications are limited as it only affects operations that
are potentially DoS vectors. For example by creating a blob containing
such a pattern a malicious user can exploit this behavior to use large
amounts of CPU time on a remote server by pushing the blob and then
creating a new clone with --filter=sparse:oid. However this filter type
is usually disabled as it is known to consume large amounts of CPU time
even without this bug.
The WM_MATCH changed in the first hunk of this patch comes from the
original implementation imported from rsync in 5230f605e1 (Import
wildmatch from rsync, 2012-10-15). Compared to the others converted here
it is fairly harmless as it only triggers at the end of the pattern and
so will only cause a single unnecessary backtrack. The others introduced
by 6f1a31f0aa (wildmatch: advance faster in <asterisk> + <literal>
patterns, 2013-01-01) and 46983441ae (wildmatch: make a special case for
"*/" with FNM_PATHNAME, 2013-01-01) are more pernicious and will cause
exponential behavior.
A new test is added to protect against future regressions.
[1] https://research.swtch.com/glob
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests in t1507-rev-parse-upstream.sh compare files "expect" and "actual"
to assert the output of "git rev-parse", "git show", and "git log".
However, two of the tests '@{reflog}-parsing does not look beyond colon'
and '@{upstream}-parsing does not look beyond colon' don't inspect the
contents of the created files.
Assert output of "git rev-parse" in tests in t1507-rev-parse-upstream.sh
to improve test coverage.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in file t1404-update-ref-errors.sh create file "unchanged" as
the expected side for a test_cmp assertion at the end of the test for
output of "git for-each-ref". Test 'no bogus intermediate values during
delete' also creates a file named "unchanged" using "git for-each-ref".
However, the file isn't used for any assertions in the test. Instead,
"git rev-parse" is used to compare the reference with variable $D.
Don't create unused file "unchanged" in test 'no bogus intermediate
values during delete' of t1404-update-ref-errors.sh.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t1400-update-ref.sh test 'transaction can create and delete' creates
files "expect" and "actual", but doesn't compare them. Similarly, test
'transaction cannot restart ongoing transaction' redirects output of
"git update-ref" to file "actual", but doesn't check its contents with
any assertions.
Assert output of "git update-ref" in tests to improve test coverage in
t1400-update-ref.sh.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test 'gitdir selection on unsupported repo' in t1302-repo-version.sh
writes output of a "git config" invocation to file "actual". However,
the test doesn't have any assertions for the file. The file was used by
this test until commit b9605bc4f2 (config: only read .git/config from
configured repos, 2016-09-12), before which "git config" was expected to
print the bogus value of "core.repositoryformatversion" to standard
output.
Don't redirect output of "git config" to file "actual" in test 'gitdir
selection on unsupported repo'.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Builtin "git mktree" writes the the object name of the tree object built
to the standard output. Tests 'mktree refuses to read ls-tree -r output
(1)' and 'mktree refuses to read ls-tree -r output (2)' in
"t1010-mktree.sh" redirect output of "git mktree" to a file, but don't
use its contents in assertions.
Don't redirect output of "git mktree" to file "actual" in tests that
assert that an invocation of "git mktree" must fail.
Output of "git mktree" is empty when it refuses to build a tree object.
So, alternatively, the test could assert that the output is empty.
However, there isn't a good reason for the user to expect the command to
be silent in such cases, so we shouldn't enforce it. The user shouldn't
use the output of a failing command anyway.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test "cat-file $arg1 $arg2 error on missing full OID" in
t1006-cat-file.sh compares files "expect.err" and "err.actual" to assert
the expected error output of "git cat-file". A similar test in the same
file named "cat-file $arg1 $arg2 error on missing short OID" also
creates these two files, but doesn't use them in assertions.
Assert error output of "git cat-file" in test "cat-file $arg1 $arg2
error on missing short OID" of t1006-cat-file.sh to improve test
coverage.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test 'reset should work' in t1005-read-tree-reset.sh compares two files
"expect" and "actual" to assert the expected output of "git ls-files".
Several other tests in the same file also create files "expect" and
"actual", but don't use them in assertions.
Assert output of "git ls-files" in t1005-read-tree-reset.sh to improve
test coverage.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" while the index is unmerged sometimes failed to parse
the diff output it internally produces and died, which has been
corrected.
* jk/add-p-unmerged-fix:
add-patch: handle "* Unmerged path" lines
The code to parse "git rebase -X<opt>" was not prepared to see an
unparsable option string, which has been corrected.
* ab/fix-strategy-opts-parsing:
sequencer.c: fix overflow & segfault in parse_strategy_opts()
"git format-patch" learned to write a log-message only output file
for empty commits.
* jk/format-patch-change-format-for-empty-commits:
format-patch: output header for empty commits
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
A few subcommands have been taught to stop users from working on a
branch that is being used in another worktree linked to the same
repository.
* rj/avoid-switching-to-already-used-branch:
switch: reject if the branch is already checked out elsewhere (test)
rebase: refuse to switch to a branch already checked out elsewhere (test)
branch: fix die_if_checked_out() when ignore_current_worktree
worktree: introduce is_shared_symref()
Allow "git bisect reset" to check out the original branch when the
branch is already checked out in a different worktree linked to the
same repository.
* rj/bisect-already-used-branch:
bisect: fix "reset" when branch is checked out elsewhere
"git push" has been taught to allow deletion of refs with one-level
names to help repairing a repository who acquired such a ref by
mistake. In general, we don't encourage use of such a ref, and
creation or update to such a ref is rejected as before.
* zh/push-to-delete-onelevel-ref:
push: allow delete single-level ref
receive-pack: fix funny ref error messsage
"git restore" supports options like "--ours" that are only
meaningful during a conflicted merge, but these options are only
meaningful when updating the working tree files. These options are
marked to be incompatible when both "--staged" and "--worktree" are
in effect.
* ak/restore-both-incompatible-with-conflicts:
restore: fault --staged --worktree with merge opts
There's code in git_connect() that checks whether we are doing a push
with protocol_v2, and if so, drops us to protocol_v0 (since we know
how to do v2 only for fetches). But it misses some corner cases:
1. it checks the "prog" variable, which is actually the path to
receive-pack on the remote side. By default this is just
"git-receive-pack", but it could be an arbitrary string (like
"/path/to/git receive-pack", etc). We'd accidentally stay in v2
mode in this case.
2. besides "receive-pack" and "upload-pack", there's one other value
we'd expect: "upload-archive" for handling "git archive --remote".
Like receive-pack, this doesn't understand v2, and should use the
v0 protocol.
In practice, neither of these causes bugs in the real world so far. We
do send a "we understand v2" probe to the server, but since no server
implements v2 for anything but upload-pack, it's simply ignored. But
this would eventually become a problem if we do implement v2 for those
endpoints, as older clients would falsely claim to understand it,
leading to a server response they can't parse.
We can fix (1) by passing in both the program path and the "name" of the
operation. I treat the name as a string here, because that's the pattern
set in transport_connect(), which is one of our callers (we were simply
throwing away the "name" value there before).
We can fix (2) by allowing only known-v2 protocols ("upload-pack"),
rather than blocking unknown ones ("receive-pack" and "upload-archive").
That will mean whoever eventually implements v2 push will have to adjust
this list, but that's reasonable. We'll do the safe, conservative thing
(sticking to v0) by default, and anybody working on v2 will quickly
realize this spot needs to be updated.
The new tests cover the receive-pack and upload-archive cases above, and
re-confirm that we allow v2 with an arbitrary "--upload-pack" path (that
already worked before this patch, of course, but it would be an easy
thing to break if we flipped the allow/block logic without also handling
"name" separately).
Here are a few miscellaneous implementation notes, since I had to do a
little head-scratching to understand who calls what:
- transport_connect() is called only for git-upload-archive. For
non-http git remotes, that resolves to the virtual connect_git()
function (which then calls git_connect(); confused yet?). So
plumbing through "name" in connect_git() covers that.
- for regular fetches and pushes, callers use higher-level functions
like transport_fetch_refs(). For non-http git remotes, that means
calling git_connect() under the hood via connect_setup(). And that
uses the "for_push" flag to decide which name to use.
- likewise, plumbing like fetch-pack and send-pack may call
git_connect() directly; they each know which name to use.
- for remote helpers (including http), we already have separate
parameters for "name" and "exec" (another name for "prog"). In
process_connect_service(), we feed the "name" to the helper via
"connect" or "stateless-connect" directives.
There's also a "servpath" option, which can be used to tell the
helper about the "exec" path. But no helpers we implement support
it! For http it would be useless anyway (no reasonable server
implementation will allow you to send a shell command to run the
server). In theory it would be useful for more obscure helpers like
remote-ext, but even there it is not implemented.
It's tempting to get rid of it simply to reduce confusion, but we
have publicly documented it since it was added in fa8c097cc9
(Support remote helpers implementing smart transports, 2009-12-09),
so it's possible some helper in the wild is using it.
- So for v2, helpers (again, including http) are mainly used via
stateless-connect, driven by the main program. But they do still
need to decide whether to do a v2 probe. And so there's similar
logic in remote-curl.c's discover_refs() that looks for
"git-receive-pack". But it's not buggy in the same way. Since it
doesn't support servpath, it is always dealing with a "service"
string like "git-receive-pack". And since it doesn't support
straight "connect", it can't be used for "upload-archive".
So we could leave that spot alone. But I've updated it here to match
the logic we're changing in connect_git(). That seems like the least
confusing thing for somebody who has to touch both of these spots
later (say, to add v2 push support). I didn't add a new test to make
sure this doesn't break anything; we already have several tests (in
t5551 and elsewhere) that make sure we are using v2 over http.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new "fetch.hideRefs" option can be used to exclude specified refs
from "rev-list --objects --stdin --not --all" traversal for
checking object connectivity, most useful when there are many
unrelated histories in a single repository.
* ew/fetch-hiderefs:
fetch: support hideRefs to speed up connectivity checks
