Teach 'git index-pack' to optionally write and verify reverse index with
'--[no-]rev-index', as well as respecting the 'pack.writeReverseIndex'
configuration option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify the format of the on-disk reverse index 'pack-*.rev' file, as
well as prepare the code for the existence of such files.
The reverse index maps from pack relative positions (i.e., an index into
the array of object which is sorted by their offsets within the
packfile) to their position within the 'pack-*.idx' file. Today, this is
done by building up a list of (off_t, uint32_t) tuples for each object
(the off_t corresponding to that object's offset, and the uint32_t
corresponding to its position in the index). To convert between pack and
index position quickly, this array of tuples is radix sorted based on
its offset.
This has two major drawbacks:
First, the in-memory cost scales linearly with the number of objects in
a pack. Each 'struct revindex_entry' is sizeof(off_t) +
sizeof(uint32_t) + padding bytes for a total of 16.
To observe this, force Git to load the reverse index by, for e.g.,
running 'git cat-file --batch-check="%(objectsize:disk)"'. When asking
for a single object in a fresh clone of the kernel, Git needs to
allocate 120+ MB of memory in order to hold the reverse index in memory.
Second, the cost to sort also scales with the size of the pack.
Luckily, this is a linear function since 'load_pack_revindex()' uses a
radix sort, but this cost still must be paid once per pack per process.
As an example, it takes ~60x longer to print the _size_ of an object as
it does to print that entire object's _contents_:
Benchmark #1: git.compile cat-file --batch <obj
Time (mean ± σ): 3.4 ms ± 0.1 ms [User: 3.3 ms, System: 2.1 ms]
Range (min … max): 3.2 ms … 3.7 ms 726 runs
Benchmark #2: git.compile cat-file --batch-check="%(objectsize:disk)" <obj
Time (mean ± σ): 210.3 ms ± 8.9 ms [User: 188.2 ms, System: 23.2 ms]
Range (min … max): 193.7 ms … 224.4 ms 13 runs
Instead, avoid computing and sorting the revindex once per process by
writing it to a file when the pack itself is generated.
The format is relatively straightforward. It contains an array of
uint32_t's, the length of which is equal to the number of objects in the
pack. The ith entry in this table contains the index position of the
ith object in the pack, where "ith object in the pack" is determined by
pack offset.
One thing that the on-disk format does _not_ contain is the full (up to)
eight-byte offset corresponding to each object. This is something that
the in-memory revindex contains (it stores an off_t in 'struct
revindex_entry' along with the same uint32_t that the on-disk format
has). Omit it in the on-disk format, since knowing the index position
for some object is sufficient to get a constant-time lookup in the
pack-*.idx file to ask for an object's offset within the pack.
This trades off between the on-disk size of the 'pack-*.rev' file for
runtime to chase down the offset for some object. Even though the lookup
is constant time, the constant is heavier, since it can potentially
involve two pointer walks in v2 indexes (one to access the 4-byte offset
table, and potentially a second to access the double wide offset table).
Consider trying to map an object's pack offset to a relative position
within that pack. In a cold-cache scenario, more page faults occur while
switching between binary searching through the reverse index and
searching through the *.idx file for an object's offset. Sure enough,
with a cold cache (writing '3' into '/proc/sys/vm/drop_caches' after
'sync'ing), printing out the entire object's contents is still
marginally faster than printing its size:
Benchmark #1: git.compile cat-file --batch-check="%(objectsize:disk)" <obj >/dev/null
Time (mean ± σ): 22.6 ms ± 0.5 ms [User: 2.4 ms, System: 7.9 ms]
Range (min … max): 21.4 ms … 23.5 ms 41 runs
Benchmark #2: git.compile cat-file --batch <obj >/dev/null
Time (mean ± σ): 17.2 ms ± 0.7 ms [User: 2.8 ms, System: 5.5 ms]
Range (min … max): 15.6 ms … 18.2 ms 45 runs
(Numbers taken in the kernel after cheating and using the next patch to
generate a reverse index). There are a couple of approaches to improve
cold cache performance not pursued here:
- We could include the object offsets in the reverse index format.
Predictably, this does result in fewer page faults, but it triples
the size of the file, while simultaneously duplicating a ton of data
already available in the .idx file. (This was the original way I
implemented the format, and it did show
`--batch-check='%(objectsize:disk)'` winning out against `--batch`.)
On the other hand, this increase in size also results in a large
block-cache footprint, which could potentially hurt other workloads.
- We could store the mapping from pack to index position in more
cache-friendly way, like constructing a binary search tree from the
table and writing the values in breadth-first order. This would
result in much better locality, but the price you pay is trading
O(1) lookup in 'pack_pos_to_index()' for an O(log n) one (since you
can no longer directly index the table).
So, neither of these approaches are taken here. (Thankfully, the format
is versioned, so we are free to pursue these in the future.) But, cold
cache performance likely isn't interesting outside of one-off cases like
asking for the size of an object directly. In real-world usage, Git is
often performing many operations in the revindex (i.e., asking about
many objects rather than a single one).
The trade-off is worth it, since we will avoid the vast majority of the
cost of generating the revindex that the extra pointer chase will look
like noise in the following patch's benchmarks.
This patch describes the format and prepares callers (like in
pack-revindex.c) to be able to read *.rev files once they exist. An
implementation of the writer will appear in the next patch, and callers
will gradually begin to start using the writer in the patches that
follow after that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two new ways to feed configuration variable-value pairs
via environment variables, and tweak the way GIT_CONFIG_PARAMETERS
encodes variable/value pairs to make it more robust.
* ps/config-env-pairs:
config: allow specifying config entries via envvar pairs
environment: make `getenv_safe()` a public function
config: store "git -c" variables using more robust format
config: parse more robust format in GIT_CONFIG_PARAMETERS
config: extract function to parse config pairs
quote: make sq_dequote_step() a public function
config: add new way to pass config via `--config-env`
git: add `--super-prefix` to usage string
Clean-up docs, codepaths and tests around mailmap.
* ab/mailmap: (22 commits)
shortlog: remove unused(?) "repo-abbrev" feature
mailmap doc + tests: document and test for case-insensitivity
mailmap tests: add tests for empty "<>" syntax
mailmap tests: add tests for whitespace syntax
mailmap tests: add a test for comment syntax
mailmap doc + tests: add better examples & test them
tests: refactor a few tests to use "test_commit --append"
test-lib functions: add an --append option to test_commit
test-lib functions: add --author support to test_commit
test-lib functions: document arguments to test_commit
test-lib functions: expand "test_commit" comment template
mailmap: test for silent exiting on missing file/blob
mailmap tests: get rid of overly complex blame fuzzing
mailmap tests: add a test for "not a blob" error
mailmap tests: remove redundant entry in test
mailmap tests: improve --stdin tests
mailmap tests: modernize syntax & test idioms
mailmap tests: use our preferred whitespace syntax
mailmap doc: start by mentioning the comment syntax
check-mailmap doc: note config options
...
"git fetch" learns to treat ref updates atomically in all-or-none
fashion, just like "git push" does, with the new "--atomic" option.
* ps/fetch-atomic:
fetch: implement support for atomic reference updates
fetch: allow passing a transaction to `s_update_ref()`
fetch: refactor `s_update_ref` to use common exit path
fetch: use strbuf to format FETCH_HEAD updates
fetch: extract writing to FETCH_HEAD
"git diff" showed a submodule working tree with untracked cruft as
"Submodule commit <objectname>-dirty", but a natural expectation is
that the "-dirty" indicator would align with "git describe --dirty",
which does not consider having untracked files in the working tree
as source of dirtiness. The inconsistency has been fixed.
* sj/untracked-files-in-submodule-directory-is-not-dirty:
diff: do not show submodule with untracked files as "-dirty"
"git mktag" validates its input using its own rules before writing
a tag object---it has been updated to share the logic with "git
fsck".
* ab/mktag: (23 commits)
mktag: add a --[no-]strict option
mktag: mark strings for translation
mktag: convert to parse-options
mktag: allow omitting the header/body \n separator
mktag: allow turning off fsck.extraHeaderEntry
fsck: make fsck_config() re-usable
mktag: use fsck instead of custom verify_tag()
mktag: use puts(str) instead of printf("%s\n", str)
mktag: remove redundant braces in one-line body "if"
mktag: use default strbuf_read() hint
mktag tests: test verify_object() with replaced objects
mktag tests: improve verify_object() test coverage
mktag tests: test "hash-object" compatibility
mktag tests: stress test whitespace handling
mktag tests: run "fsck" after creating "mytag"
mktag tests: don't create "mytag" twice
mktag tests: don't redirect stderr to a file needlessly
mktag tests: remove needless SHA-1 hardcoding
mktag tests: use "test_commit" helper
mktag tests: don't needlessly use a subshell
...
During a merge conflict, the name of a file may appear multiple
times in "git ls-files" output, once for each stage. If you use
both `--delete` and `--modify` at the same time, the output may
mention a deleted file twice.
When none of the '-t', '-u', or '-s' options is in use, these
duplicate entries do not add much value to the output.
Introduce a new '--deduplicate' option to suppress them.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: extended doc and rewritten commit log]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the ability to inject "poison" gettext() messages via the
GIT_TEST_GETTEXT_POISON special test setup.
I initially added this as a compile-time option in bb946bba76 (i18n:
add GETTEXT_POISON to simulate unfriendly translator, 2011-02-22), and
most recently modified to be toggleable at runtime in
6cdccfce1e (i18n: make GETTEXT_POISON a runtime option, 2018-11-08)..
The reason for its removal is that the trade-off of maintaining it
v.s. what it's getting us has long since flipped. When gettext was
integrated in 5e9637c629 (i18n: add infrastructure for translating
Git with gettext, 2011-11-18) there was understandable concern on the
Git ML that in marking messages for translation en-masse we'd
inadvertently mark plumbing messages. The GETTEXT_POISON facility was
a way to smoke those out via our test suite.
Nowadays however we're done (or almost entirely done) with any marking
of messages for translation. New messages are usually marked by their
authors, who'll know whether it makes sense to translate them or
not. If not any errors in marking the messages are much more likely to
be spotted in review than in the the initial deluge of i18n patches in
the 2011-2012 era.
So let's just remove this. This leaves the test suite in a state where
we still have a lot of test_i18n, C_LOCALE_OUTPUT
etc. uses. Subsequent commits will remove those too.
The change to t/lib-rebase.sh is a selective revert of the relevant
part of f2d17068fd (i18n: rebase-interactive: mark comments of squash
for translation, 2016-06-17), and the comment in
t/t3406-rebase-message.sh is from c7108bf9ed (i18n: rebase: mark
messages for translation, 2012-07-25).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove diagnostics that haven't been emitted by "fsck" or its
predecessors for around 15 years. This documentation was added in
c64b9b8860 (Reference documentation for the core git commands.,
2005-05-05), but was out-of-date quickly after that.
Notes on individual diagnostics:
- "expect dangling commits": Added in bcee6fd8e7 (Make 'fsck' able
to[...], 2005-04-13), documented in c64b9b8860. Not emitted since
1024932f01 (fsck-cache: walk the 'refs' directory[...],
2005-05-18).
- "missing sha1 directory": Added in 20222118ae (Add first cut at
"fsck-cache"[...], 2005-04-08), documented in c64b9b8860. Not
emitted since 230f13225d (Create object subdirectories on demand,
2005-10-08).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that, when the packfile-uri feature is used, the client should
not assume that the extra packfiles downloaded would only contain a
single blob, but support packfiles containing multiple objects of all
types.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With generation data chunk and corrected commit dates implemented, let's
update the technical documentation for commit-graph.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The end of the cache tree index extension format trails off with
ellipses ever since 23fcc98 (doc: technical details about the index
file format, 2011-03-01). While an intuitive reader could gather what
this means, it could be better to use "and so on" instead.
Really, this is only justified because I also wanted to point out that
the number of subtrees in the index format is used to determine when the
recursive depth-first-search stack should be "popped." This should help
to add clarity to the format.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I had difficulty in my efforts to learn about the cache tree extension
based on the documentation and code because I had an incorrect
assumption about how it behaved. This might be due to some ambiguity in
the documentation, so this change modifies the beginning of the cache
tree format by expanding the description of the feature.
My hope is that this documentation clarifies a few things:
1. There is an in-memory recursive tree structure that is constructed
from the extension data. This structure has a few differences, such
as where the name is stored.
2. What does it mean for an entry to be invalid?
3. When exactly are "new" trees created?
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index has a "cache tree" extension. This corresponds to a
significant API implemented in cache-tree.[ch]. However, there are a few
places that refer to this erroneously as "cached tree". These are rare,
but notably the index-format.txt file itself makes this error.
The only other reference is in t7104-reset-hard.sh.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up on the "maintenance part-3" which introduced scheduled
maintenance tasks to support platforms whose native scheduling
methods are not 'cron'.
* ds/maintenance-part-4:
maintenance: use Windows scheduled tasks
maintenance: use launchctl on macOS
maintenance: include 'cron' details in docs
maintenance: extract platform-specific scheduling
"git rev-parse" can be explicitly told to give output as absolute
or relative path with the `--path-format=(absolute|relative)` option.
* bc/rev-parse-path-format:
rev-parse: add option for absolute or relative path formatting
abspath: add a function to resolve paths with missing components
The configuration variable 'core.abbrev' can be set to 'no' to
force no abbreviation regardless of the hash algorithm.
* ew/decline-core-abbrev:
core.abbrev=no disables abbreviations
While we currently have the `GIT_CONFIG_PARAMETERS` environment variable
which can be used to pass runtime configuration data to git processes,
it's an internal implementation detail and not supposed to be used by
end users.
Next to being for internal use only, this way of passing config entries
has a major downside: the config keys need to be parsed as they contain
both key and value in a single variable. As such, it is left to the user
to escape any potentially harmful characters in the value, which is
quite hard to do if values are controlled by a third party.
This commit thus adds a new way of adding config entries via the
environment which gets rid of this shortcoming. If the user passes the
`GIT_CONFIG_COUNT=$n` environment variable, Git will parse environment
variable pairs `GIT_CONFIG_KEY_$i` and `GIT_CONFIG_VALUE_$i` for each
`i` in `[0,n)`.
While the same can be achieved with `git -c <name>=<value>`, one may
wish to not do so for potentially sensitive information. E.g. if one
wants to set `http.extraHeader` to contain an authentication token,
doing so via `-c` would trivially leak those credentials via e.g. ps(1),
which typically also shows command arguments.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitmailmap(5) uses 'GIT_WORK_DIR' to refer to the root of the
repository, but this environment variable does not exist.
Use the correct spelling for that variable, 'GIT_WORK_TREE'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add documentation and more tests for case-insensitivity. The existing
test only matched on the E-Mail part, but as shown here we also match
the name with strcasecmp().
This behavior was last discussed on the mailing list in the thread
starting at [1]. It seems we're keeping it like this, so let's
document it.
1. https://lore.kernel.org/git/87czykvg19.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mailmap documentation added in 0925ce4d49 (Add map_user()
and clear_mailmap() to mailmap, 2009-02-08) to continue discussing the
Jane/Joe example. I think this makes things a lot less confusing as
we're building up more complex examples using one set of data which
covers all the things we'd like to discuss.
Also add tests to assert that what our documentation says is what's
actually happening. This is mostly (or entirely) covered by existing
tests which I'm not deleting, but having these tests for the synopsis
makes it easier to follow-along while reading the tests & docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mentioning the comment syntax and blank line support first is in line
with how "git help config" describes its format. See
b8936cf060 (config.txt grammar, typo, and asciidoc fixes, 2006-06-08)
for the paragraph I'm copying & amending from its documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a passing mention of the mailmap.file and mailmap.blob
configuration options. Before this addition a reader of the
"check-mailmap" manpage would have no idea that a custom map could be
specified, unless they'd happen to e.g. come across it in the "config"
manpage first.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quote the mailmap.file and mailmap.blob configuration variables as
`mailmap.file` and `mailmap.blob`, and link to git-config(1). This is
in line with the preferred way of doing this in the rest of our
documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a gitmailmap(5) page similar to how .gitmodules and .gitignore
have their own pages at gitmodules(5) and gitignore(5). Now instead of
"check-mailmap", "blame" and "shortlog" documentation including the
description of the format we link to one canonical place.
This makes things easier for readers, since in our manpage or
web-based[1] output it's not clear that the "MAPPING AUTHORS" sections
aren't subtly different, as opposed to just included.
1. https://git-scm.com/docs/git-check-mailmap
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing a fetch, then git will currently allocate one reference
transaction per reference update and directly commit it. This means that
fetches are non-atomic: even if some of the reference updates fail,
others may still succeed and modify local references.
This is fine in many scenarios, but this strategy has its downsides.
- The view of remote references may be inconsistent and may show a
bastardized state of the remote repository.
- Batching together updates may improve performance in certain
scenarios. While the impact probably isn't as pronounced with loose
references, the upcoming reftable backend may benefit as it needs to
write less files in case the update is batched.
- The reference-update hook is currently being executed twice per
updated reference. While this doesn't matter when there is no such
hook, we have seen severe performance regressions when doing a
git-fetch(1) with reference-transaction hook when the remote
repository has hundreds of thousands of references.
Similar to `git push --atomic`, this commit thus introduces atomic
fetches. Instead of allocating one reference transaction per updated
reference, it causes us to only allocate a single transaction and commit
it as soon as all updates were received. If locking of any reference
fails, then we abort the complete transaction and don't update any
reference, which gives us an all-or-nothing fetch.
Note that this may not completely fix the first of above downsides, as
the consistent view also depends on the server-side. If the server
doesn't have a consistent view of its own references during the
reference negotiation phase, then the client would get the same
inconsistent view the server has. This is a separate problem though and,
if it actually exists, can be fixed at a later point.
This commit also changes the way we write FETCH_HEAD in case `--atomic`
is passed. Instead of writing changes as we go, we need to accumulate
all changes first and only commit them at the end when we know that all
reference updates succeeded. Ideally, we'd just do so via a temporary
file so that we don't need to carry all updates in-memory. This isn't
trivially doable though considering the `--append` mode, where we do not
truncate the file but simply append to it. And given that we support
concurrent processes appending to FETCH_HEAD at the same time without
any loss of data, seeding the temporary file with current contents of
FETCH_HEAD initially and then doing a rename wouldn't work either. So
this commit implements the simple strategy of buffering all changes and
appending them to the file on commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it's already possible to pass runtime configuration via `git -c
<key>=<value>`, it may be undesirable to use when the value contains
sensitive information. E.g. if one wants to set `http.extraHeader` to
contain an authentication token, doing so via `-c` would trivially leak
those credentials via e.g. ps(1), which typically also shows command
arguments.
To enable this usecase without leaking credentials, this commit
introduces a new switch `--config-env=<key>=<envvar>`. Instead of
directly passing a value for the given key, it instead allows the user
to specify the name of an environment variable. The value of that
variable will then be used as value of the key.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git clone --local', the operation may fail if another
process is modifying the source repository. Document that this race
condition is known to hopefully help anyone who may run into it.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The table describing the porcelain format in git-status(1) is helpful,
but it's not completely clear what the three sections mean, even to
some contributors. As a result, users are unable to find how to detect
common cases like merge conflicts programmatically.
Let's improve this situation by rephrasing to be more explicit about
what each of the sections in the table means, to tell users in plain
language which cases are occurring, and to describe what "unmerged"
means.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"directory cache" (or "directory cache index", "cache") are obsolete
terms which have been superseded by "index". Keeping them in the
documentation may be a source of confusion. This commit replaces
them with the current term, "index", on man pages.
Signed-off-by: Utku Gultopu <ugultopu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Google may have changed Gmail security and now less secure app access
needs to be explicitly enabled if two-factor authentication is not in
place, otherwise send-email fails with:
5.7.8 Username and Password not accepted. Learn more at
5.7.8 https://support.google.com/mail/?p=BadCredentials
Document steps required to make this work.
Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[dl: Clean up commit message and incorporate suggestions into patch.]
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text says "if you can certify DCO then you add a Signed-off-by
trailer". But it does not say anything about people who cannot or
do not want to certify. A natural reading may be that if you do not
certify, you must not add the trailer, but it shouldn't hurt to be
overly explicit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree repair" learned to deal with the case where both the
repository and the worktree moved.
* es/worktree-repair-both-moved:
worktree: teach `repair` to fix multi-directional breakage
The "--format=%(trailers)" mechanism gets enhanced to make it
easier to design output for machine consumption.
* ab/trailers-extra-format:
pretty format %(trailers): add a "key_value_separator"
pretty format %(trailers): add a "keyonly"
pretty-format %(trailers): fix broken standalone "valueonly"
pretty format %(trailers) doc: avoid repetition
pretty format %(trailers) test: split a long line
Now that mktag has been migrated to use the fsck machinery to check
its input, it makes sense to teach it to run in the equivalent of "git
fsck"'s default mode.
For cases where mktag is used to (re)create a tag object using data
from an existing and malformed tag object, the validation may
optionally have to be loosened. Teach the command to take the
"--[no-]strict" option to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier commits mktag learned to use the fsck machinery, at which
point we needed to add fsck.extraHeaderEntry so it could be as strict
about extra headers as it's been ever since it was implemented.
But it's not nice to need to switch away from "mktag" to "hash-object"
+ manual "fsck" just because you'd like to have an extra header. So
let's support turning it off by getting "fsck.*" variables from the
config.
Pedantically speaking it's still not possible to make "mktag" behave
just like "hash-object -t tag" does, since we're unconditionally going
to check the referenced object in verify_object_in_tag(), which is our
own check, and not one that exists in fsck.c.
But the spirit of "this works like fsck" is preserved, in that if you
created such a tag with "hash-object" and did a full "fsck" on the
repository it would also error out about that invalid object, it just
wouldn't emit the same message as fsck does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
