The primary purpose of three tests in 't4001-diff-rename.sh' is to
check rename detection in 'git status', but all three do so by running
'git status' upstream of a pipe, hiding its exit code. Consequently,
the test could continue even if 'git status' exited with error.
Use an intermediate file between 'git status' and 'test_i18ngrep' to
catch a potential failure of the former.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary purpose of 't6022-merge-rename.sh' is to test 'git merge',
but one of the tests runs it upstream of a pipe, hiding its exit code.
Consequently, the test could continue even if 'git merge' exited with
error.
Use an intermediate file between 'git merge' and 'test_i18ngrep' to
catch a potential failure of the former.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second 'test_i18ngrep' invocation in the test 'curl redirects
respect whitelist' is missing its filename parameter. This has
remained unnoticed since its introduction in f4113cac0 (http: limit
redirection to protocol-whitelist, 2015-09-22), because it would only
cause the test to fail if Git was built with a sufficiently old
libcurl version. The test's two ||-chained 'test_i18ngrep'
invocations are supposed to check that either one of the two patterns
is present in 'git clone's error message. As it happens, the first
invocation covers the error message from any reasonably up-to-date
libcurl, thus the second invocation, the one without the filename
parameter, isn't executed at all. Apparently no one has run the test
suite's httpd tests with such an old libcurl in the last 2+ years, or
at least they haven't bothered to notify us about the failed test.
Fix this by consolidating the two patterns into a single extended
regexp, eliminating the need for an ||-chained second 'test_i18ngrep'
invocation.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'push --no-progress silences progress but not status' runs
'test_i18ngrep' without specifying a filename parameter. This has
remained unnoticed since its introduction in e304aeba2 (t5541: test
more combinations of --progress, 2012-05-01), because that
'test_i18ngrep' is supposed to check that the given pattern is not
present in its input, and of course it won't find that pattern if its
input is empty (as it comes from /dev/null). This also means that
this test could miss a potential breakage of 'git push --no-progress'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check that a shell variable is non-empty, and then we
check that it's equal to a particular value. Just checking
the latter covers both cases.
I suspect the original was trying to give better output when
the test fails, but using "-x" covers that these days.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_directory() code ignores all paths named ".git" even if it's not
a valid git repository. See treat_path() for details. Since ".git" is
basically invisible to read_directory(), when we are asked to
invalidate a path that contains ".git", we can safely ignore it
because the slow path would not consider it anyway.
This helps when fsmonitor is used and we have a real ".git" repo at
worktree top. Occasionally .git/index will be updated and if the
fsmonitor hook does not filter it, untracked cache is asked to
invalidate the path ".git/index".
Without this patch, we invalidate the root directory unncessarily,
which:
- makes read_directory() fall back to slow path for root directory
(slower)
- makes the index dirty (because UNTR extension is updated). Depending
on the index size, writing it down could also be slow.
A note about the new "safe_path" knob. Since this new check could be
relatively expensive, avoid it when we know it's not needed. If the
path comes from the index, it can't contain ".git". If it does
contain, we may be screwed up at many more levels, not just this one.
Noticed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option allows commits with empty commit messages to be rebased,
matching the same option in git-commit and git-cherry-pick. While empty
log messages are frowned upon, sometimes one finds them in older
repositories (e.g. translated from another VCS [0]), or have other
reasons for desiring them. The option is available in git-commit and
git-cherry-pick, so it is natural to make other git tools play nicely
with them. Adding this as an option allows the default to be "give the
user a chance to fix", while not interrupting the user's workflow
otherwise [1].
[0]: https://stackoverflow.com/q/8542304
[1]: https://public-inbox.org/git/7vd33afqjh.fsf@alter.siamese.dyndns.org/
To implement this, add a new --allow-empty-message flag. Then propagate
it to all calls of 'git commit', 'git cherry-pick', and 'git rebase--helper'
within the rebase scripts.
Signed-off-by: Genki Sky <sky@genki.is>
Reviewed-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is much easier to diff the output against a previous
one when the fields are sorted.
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to use the aggregate script
on the command line when one wants to get the
"environment" fields set in the codespeed output.
Previously setting GIT_REPO_NAME was needed
for this purpose.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to use the aggregate script
on the command line, to get results from
subsections.
Previously setting GIT_PERF_SUBSECTION was needed
for this purpose.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patches generated by format-patch are meant to be exchanged as emails,
most of the time. And since it's generally agreed that text in mails
should be wrapped around 70 columns or so, make sure these diffstat
follow the convention (especially when used with --cover-letter since we
already defaults to wrapping 72 columns). The default can still be
overriden with command line options.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an EXPENSIVE_ON_WINDOWS prerequisite to mark those tests which are
very expensive to run on Windows, but cheap elsewhere.
Certain tests that heavily stress the filesystem or run a lot of shell
commands are disproportionately expensive on Windows, this
prerequisite will later be used by a tests that runs in 4-8 seconds on
a modern Linux system, but takes almost 10 minutes on Windows.
There's no reason to skip such tests by default on other platforms,
but Windows users shouldn't need to wait around while they finish.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has never been any full roundtrip testing of what git-ls-files
and other commands that use wildmatch() actually do, rather we've been
satisfied with just testing the underlying C function.
Due to git-ls-files and friends having their own codepaths before they
call wildmatch() there's sometimes differences in the behavior between
the two. Even when we test for those (as with [1]), there was no one
place where you can review how these two modes differ.
Now there is. We now attempt to create a file called $haystack and
match $needle against it for each pair of $needle and $haystack that
we were passing to test-wildmatch.
If we can't create the file we skip the test. This ensures that we can
run this on all platforms and not maintain some infinitely growing
whitelist of e.g. platforms that don't support certain characters in
filenames.
A notable exception to this is Windows, where due to the reasons
explained in [2] the shellscript emulation layer might fake the
creation of a file such as "*", and "test -e" for it will succeed
since it just got created with some character that maps to "*", but
git ls-files won't be fooled by this.
Thus we need to skip creating certain filenames entirely on Windows,
the list here might be overly aggressive. I don't have access to a
Windows system to test this.
As a result of doing these tests we can now see the cases where these
two ways of testing wildmatch differ:
* Creating a file called 'a[]b' and running ls-files 'a[]b' will show
that file, but wildmatch("a[]b", "a[]b") will not match
* wildmatch() won't match a file called \ against \, but ls-files
will.
* `git --glob-pathspecs ls-files 'foo**'` will match a file
'foo/bba/arr', but wildmatch won't, however pathmatch will.
This seems like a bug to me, the two are otherwise equivalent as
these tests show.
This also reveals the case discussed in [1], since 2.16.0 '' is now an
error as far as ls-files is concerned, but wildmatch() itself happily
accepts it.
1. 9e4e8a64c2 ("pathspec: die on empty strings as pathspec",
2017-06-06)
2. nycvar.QRO.7.76.6.1801052133380.1337@wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet
(https://public-inbox.org/git/?q=nycvar.QRO.7.76.6.1801052133380.1337%40wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite the wildmatch() test suite so that each test now tests all
combinations of the wildmatch() WM_CASEFOLD and WM_PATHNAME flags.
Before this change some test inputs were not tested on
e.g. WM_PATHNAME. Now the function is stress tested on all possible
inputs, and for each input we declare what the result should be if the
mode is case-insensitive, or pathname matching, or case-sensitive or
not matching pathnames.
Also before this change, nothing was testing case-insensitive
non-pathname matching, so I've added that to test-wildmatch.c and made
use of it.
This yields a rather scary patch, but there are no functional changes
here, just more test coverage. Some now-redundant tests were deleted
as a result of this change, since they were now duplicating an earlier
test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use of ! should be reserved for non-git programs that are assumed not
to fail, see README. With this change only
t/t0110-urlmatch-normalization.sh is still using this anti-pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the unused fnmatch() test parameter from the wildmatch
test. The code that used to test this was removed in 70a8fc999d ("stop
using fnmatch (either native or compat)", 2014-02-15).
As a --word-diff shows the only change to the body of the tests is the
removal of the second out of four parameters passed to match().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a pattern from the nul_match() function in t7008-grep-binary.sh to
make sure that we don't just fall through to the "else" if there's an
unknown parameter.
This is something I added in commit 77f6f4406f ("grep: add a test
helper function for less verbose -f \0 tests", 2017-05-20) to grep
tests, which were modeled on these wildmatch tests, and I'm now
porting back to the original wildmatch tests.
I am not using the "say '...'; exit 1" pattern from t0000-basic.sh
because if I fail I want to run the rest of the tests (unless under
-i), and doing this makes sure we do that and don't exit right away
without fully reporting our errors.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't try to vertically align the test output, which is futile anyway
under the TAP output where we're going to be emitting a number for
each test without aligning the test count.
This makes subsequent changes of mine where I'm not going to be
aligning this output as I add new tests easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the wildmatch test to use more standard shell style, usually we
use "if test" not "if [".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the 4-width mixed space & tab indentation in this file with
indentation with tabs as we do in most of the rest of our tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration of struct sha1_stat. Adjust all usages of this
struct and replace hash{clr,cmp,cpy} with oid{clr,cmp,cpy} wherever
possible. Rename it to struct oid_stat.
Rename static function load_sha1_stat to load_oid_stat.
Remove macro EMPTY_BLOB_SHA1_BIN, as it's no longer used.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-daemon gets a pktline request, we strip off any
trailing newline, replacing it with a NUL. Clients prior to
5ad312bede (in git v1.4.0) would send:
git-upload-pack repo.git\n
and we need to strip it off to understand their request.
After 5ad312bede, we send the host attribute but no newline,
like:
git-upload-pack repo.git\0host=example.com\0
Both of these are parsed correctly by git-daemon. But if
some client were to combine the two:
git-upload-pack repo.git\n\0host=example.com\0
we don't parse it correctly. The problem is that we use the
"len" variable to record the position of the NUL separator,
but then decrement it when we strip the newline. So we start
with:
git-upload-pack repo.git\n\0host=example.com\0
^-- len
and end up with:
git-upload-pack repo.git\0\0host=example.com\0
^-- len
This is arguably correct, since "len" tells us the length of
the initial string, but we don't actually use it for that.
What we do use it for is finding the offset of the extended
attributes; they used to be at len+1, but are now at len+2.
We can solve that by just leaving "len" where it is. We
don't have to care about the length of the shortened string,
since we just treat it like a C string.
No version of Git ever produced such a string, but it seems
like the daemon code meant to handle this case (and it seems
like a reasonable thing for somebody to do in a 3rd-party
implementation).
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of our git-protocol tests rely on invoking the client
and having it make a request of a server. That gives a nice
real-world test of how the two behave together, but it
doesn't leave any room for testing how a server might react
to _other_ clients.
Let's add a few test helper functions which can be used to
manually conduct a git-protocol conversation with a remote
git-daemon:
1. To connect to a remote git-daemon, we need something
like "netcat". But not everybody will have netcat. And
even if they do, the behavior with respect to
half-duplex shutdowns is not portable (openbsd netcat
has "-N", with others you must rely on "-q 1", which is
racy).
Here we provide a "fake_nc" that is capable of doing
a client-side netcat, with sane half-duplex semantics.
It relies on perl's IO::Socket::INET. That's been in
the base distribution since 5.6.0, so it's probably
available everywhere. But just to be on the safe side,
we'll add a prereq.
2. To help tests speak and read pktline, this patch adds
packetize() and depacketize() functions.
I've put fake_nc() into lib-git-daemon.sh, since that's
really the only server where we'd need to use a network
socket. Whereas the pktline helpers may be of more general
use, so I've added them to test-lib-functions.sh. Programs
like upload-pack speak pktline, but can talk directly over
stdio without a network socket.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we receive a request with extended attributes after the
NUL, we try to write those attributes to the log. We do so
with a "%s" format specifier, which will only show
characters up to the first NUL.
That's enough for printing a "host=" specifier. But since
dfe422d04d (daemon: recognize hidden request arguments,
2017-10-16) we may have another NUL, followed by protocol
parameters, and those are not logged at all.
Let's cut out the attempt to show the whole string, and
instead log when we parse individual attributes. We could
leave the "extended attributes (%d bytes) exist" part of the
log, which in theory could alert us to attributes that fail
to parse. But anything we don't parse as a "host=" parameter
gets blindly added to the "protocol" attribute, so we'd see
it in that part of the log.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If receive a request like:
git-upload-pack /foo.git\0host=localhost
we mark the offset of the NUL byte as "len", and then log
the bytes after the NUL with a "%.*s" placeholder, using
"pktlen - len" as the length, and "line + len + 1" as the
start of the string.
This is off-by-one, since the start of the string skips past
the separating NUL byte, but the adjusted length includes
it. Fortunately this doesn't actually read past the end of
the buffer, since "%.*s" will stop when it hits a NUL. And
regardless of what is in the buffer, packet_read() will
always add an extra NUL terminator for safety.
As an aside, the git.git client sends an extra NUL after a
"host" field, too, so we'd generally hit that one first, not
the one added by packet_read(). You can see this in the test
output which reports 15 bytes, even though the string has
only 14 bytes of visible data. But the point is that even a
client sending unusual data could not get us to read past
the end of the buffer, so this is purely a cosmetic fix.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we start git-daemon for our tests, we send its stderr
log stream to a named pipe. We synchronously read the first
line to make sure that the daemon started, and then dump the
rest to descriptor 4. This is handy for debugging test
output with "--verbose", but the tests themselves can't
access the log data.
Let's dump the log into a file, as well, so that future
tests can check the log. There are a few subtleties worth
calling out here:
- we'll continue to send output to descriptor 4 for
viewing/debugging, which would imply swapping out "cat"
for "tee". But we want to ensure that there's no
buffering, and "tee" doesn't have a standard way to
ask for that. So we'll use a shell loop around "read"
and "printf" instead. That ensures that after a request
has been served, the matching log entries will have made
it to the file.
- the existing first-line shell loop used read/echo. We'll
switch to consistently using "read -r" and "printf" to
relay data as faithfully as possible.
- we open the logfile for append, rather than just output.
That makes it OK for tests to truncate the logfile
without restarting the daemon (the OS will atomically
seek to the end of the file when outputting each line).
That allows tests to look at the log without worrying
about pollution from earlier tests.
Helped-by: Lucas Werkmeister <mail@lucaswerkmeister.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually care about the clone operation here; we
just want to know if we were able to actually contact the
remote repository. Using ls-remote does that more
efficiently, and without us having to worry about managing
the tmp.git directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's start with how create a new directory cache after the last one
becomes invalid (e.g. because its dir mtime has changed...). In
open_cached_dir():
1. We start out with valid_cached_dir() returning false, which should
call invalidate_directory() to put a directory state back to
initial state, no untracked entries (untracked_nr zero), no sub
directory traversal (dirs[].recurse zero).
2. Since the cache cannot be used, we go the slow path opendir() and
go through items one by one via readdir(). All the directories on
disk will be added back to the cache (if not already exist in
dirs[]) and its flag "recurse" gets changed to one to note that
it's part of the cached dir travesal next time.
3. By the time we reach close_cached_dir() we should have a good
subdir list in dirs[]. Those with "recurse" flag set are the ones
present in the on-disk directory. The directory is now marked
"valid".
Next time read_directory() is called, since the directory is marked
valid, it will skip readdir(), go fast path and traverse through
dirs[] array instead.
Steps one and two need some tight cooperation. If a subdir is removed,
readdir() will not find it and of course we cannot examine/invalidate
it. To make sure removed directories on disk are gone from the cache,
step one must make sure recurse flag of all subdirs are zero.
But that's not true. If "valid" flag is already false, there is a
chance we go straight to the end of valid_cached_dir() without calling
invalidate_directory(). Or we fail to meet the "if (untracked-valid)"
condition and skip over the invalidate_directory().
After step 3, we mark the cache valid. Any stale subdir with incorrect
recurse flag becomes a real subdir next time we traverse the directory
using dirs[] array.
We could avoid this by making sure invalidate_directory() is always
called (therefore dirs[].recurse cleared) at the beginning of
open_cached_dir(). Which is what this patch does.
As to how we get into this situation, the key in the test is this
command
git checkout master
where "one/file" is replaced with "one" in the index. This index
update triggers untracked_cache_invalidate_path(), which clears valid
flag of the root directory while keeping "recurse" flag on the subdir
"one" on. On the next git-status, we go through steps 1-3 above and
save an incorrect cache on disk. The second git-status blindly follows
the bad cache data and shows the problem.
This is arguably because of a bad design where "recurse" flag plays
double roles: whether a directory should be saved on disk, and whether
it is part of a directory traversal.
We need to keep recurse flag set at "checkout master" because of the
first role: we need to keep subdir caches (dir "two" for example has
not been touched at all, no reason to throw its cache away).
As long as we make sure to ignore/reset "recurse" flag at the
beginning of a directory traversal, we're good. But maybe eventually
we should separate these two roles.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The untracked cache gets confused when a directory is swapped out for
a file. It is easiest to reproduce this by swapping out a directory
with a symlink to another directory, and as the tests show the symlink
case is the only case we've found where "git status" will subsequently
report incorrect information, even though it's possible to otherwise
get the untracked cache into a state where its internal data
structures don't reflect reality.
In the symlink case, whatever files are inside the target of the
symlink will be incorrectly shown as untracked. This issue does not
happen if the symlink links to another file, only if it links to
another directory.
A stand-alone testcase for copying into a terminal:
(
rm -rf /tmp/testrepo &&
git init /tmp/testrepo &&
cd /tmp/testrepo &&
mkdir x y &&
touch x/a y/b &&
git add x/a y/b &&
git commit -msnap &&
git rm -rf y &&
ln -s x y &&
git add y &&
git commit -msnap2 &&
git checkout HEAD~ &&
git status &&
git checkout master &&
sleep 1 &&
git status &&
git status
)
This will incorrectly show y/a as an untracked file. Both the "git
status" call right before "git checkout master" and the "sleep 1"
after the "checkout master" are needed to reproduce this, presumably
due to the untracked cache tracking on the basis of cached whole
seconds from stat(2).
When git gets into this state, a workaround to fix it is to issue a
one-off:
git -c core.untrackedCache=false status
For the non-symlink case, the bug is that the output of
test-dump-untracked-cache should not include:
/one/ 0000000000000000000000000000000000000000 recurse valid
It being in the output implies that cached traversal of root includes
the directory "one" which does not exist on disk anymore.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 356ee4659b ("sequencer: try to commit without forking 'git
commit'", 2017-11-24) forgot to run the 'prepare-commit-msg' hook when
creating the commit. Fix this by writing the commit message to a
different file and running the hook. Using a different file means that
if the commit is cancelled the original message file is
unchanged. Also move the checks for an empty commit so the order
matches 'git commit'.
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that cherry-pick and rebase call the 'prepare-commit-msg' hook
correctly. The expected values for the hook arguments are taken to
match the current master branch. I think there is scope for improving
the arguments passed so they make a bit more sense - for instance
cherry-pick currently passes different arguments depending on whether
the commit message is being edited. Also the arguments for rebase
could be improved. Commit 7c4188360a ("rebase -i: proper
prepare-commit-msg hook argument when squashing", 2008-10-3) apparently
changed things so that when squashing rebase would pass 'squash' as
the argument to the hook but that has been lost.
I think that it would make more sense to pass 'message' for revert and
cherry-pick -x/-s (i.e. cases where there is a new message or the
current message in modified by the command), 'squash' when squashing
with a new message and 'commit HEAD/CHERRY_PICK_HEAD'
otherwise (picking and squashing without a new message).
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the indentation and style of the hook script in preparation for
further changes.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a0a967568e ("update-index --split-index: do not split if $GIT_DIR is
read only", 2014-06-13), we tried to make sure we can still write an
index, even if the shared index can not be written.
We did so by just calling 'do_write_locked_index()' just before
'write_shared_index()'. 'do_write_locked_index()' always at least
closes the tempfile nowadays, and used to close or commit the lockfile
if COMMIT_LOCK or CLOSE_LOCK were given at the time this feature was
introduced. COMMIT_LOCK or CLOSE_LOCK is passed in by most callers of
'write_locked_index()'.
After calling 'write_shared_index()', we call 'write_split_index()',
which calls 'do_write_locked_index()' again, which then tries to use the
closed lockfile again, but in fact fails to do so as it's already
closed. This eventually leads to a segfault.
Make sure to write the main index only once.
[nd: most of the commit message and investigation done by Thomas, I only
tweaked the solution a bit]
Helped-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" was taught to ignore local changes to submodules as
they do not interfere with the partial addition of regular changes
anyway.
* nd/add-i-ignore-submodules:
add--interactive: ignore submodule changes except HEAD
Instead of maintaining home-grown email address parsing code, ship
a copy of reasonably recent Mail::Address to be used as a fallback
in 'git send-email' when the platform lacks it.
* mm/send-email-fallback-to-local-mail-address:
send-email: add test for Linux's get_maintainer.pl
perl/Git: remove now useless email-address parsing code
send-email: add and use a local copy of Mail::Address
"git stash -- <pathspec>" incorrectly blew away untracked files in
the directory that matched the pathspec, which has been corrected.
* tg/stash-with-pathspec-fix:
stash: don't delete untracked files that match pathspec
When resetting the working tree files recursively, the working tree
of submodules are now also reset to match.
* sb/submodule-update-reset-fix:
submodule: submodule_move_head omits old argument in forced case
unpack-trees: oneway_merge to update submodules
t/lib-submodule-update.sh: fix test ignoring ignored files in submodules
t/lib-submodule-update.sh: clarify test
"git commit --fixup" did not allow "-m<message>" option to be used
at the same time; allow it to annotate resulting commit with more
text.
* ab/commit-m-with-fixup:
commit: add support for --fixup <commit> -m"<extra message>"
commit doc: document that -c, -C, -F and --fixup with -m error
"perf" test output can be sent to codespeed server.
* cc/codespeed:
perf/run: read GIT_PERF_REPO_NAME from perf.repoName
perf/run: learn to send output to codespeed server
perf/run: learn about perf.codespeedOutput
perf/run: add conf_opts argument to get_var_from_env_or_config()
perf/aggregate: implement codespeed JSON output
perf/aggregate: refactor printing results
perf/aggregate: fix checking ENV{GIT_PERF_SUBSECTION}
"diff" family of commands learned "--find-object=<object-id>" option
to limit the findings to changes that involve the named object.
* sb/diff-blobfind-pickaxe:
diff: use HAS_MULTI_BITS instead of counting bits manually
diff: properly error out when combining multiple pickaxe options
diffcore: add a pickaxe option to find a specific blob
diff: introduce DIFF_PICKAXE_KINDS_MASK
diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bit
diff.h: make pickaxe_opts an unsigned bit field
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
"git merge -Xours/-Xtheirs" learned to use our/their version when
resolving a conflicting updates to a symbolic link.
* jc/merge-symlink-ours-theirs:
merge: teach -Xours/-Xtheirs to symbolic link merge
"git status" after moving a path in the working tree (hence making
it appear "removed") and then adding with the -N option (hence
making that appear "added") detected it as a rename, but did not
report the old and new pathnames correctly.
* nd/ita-wt-renames-in-status:
wt-status.c: handle worktree renames
wt-status.c: rename rename-related fields in wt_status_change_data
wt-status.c: catch unhandled diff status codes
wt-status.c: coding style fix
Use DIFF_DETECT_RENAME for detect_rename assignments
t2203: test status output with porcelain v2 format
An old regression in "git describe --all $annotated_tag^0" has been
fixed.
* dk/describe-all-output-fix:
describe: prepend "tags/" when describing tags with embedded name
A recently introduced regression caused a segfault at clone time on
case-insensitive filesystems when filenames differing only in case are
present. This bug has already been fixed (repository: pre-initialize
hash algo pointer, 2018-01-18), but it's not the first time similar
problems have arisen. Therefore, introduce a test to catch this case and
protect against future regressions.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3501 had a testcase originally added in 05f2dfb965 (cherry-pick:
demonstrate a segmentation fault, 2016-11-26) to ensure cherry-pick
wouldn't segfault when working with a dirty file involved in a rename.
While the segfault was fixed, there was another problem this test
demonstrated: namely, that git would overwrite a dirty file involved in a
rename. Further, the test encoded a "successful merge" and overwriting of
this file as correct behavior. Modify the test so that it would still
catch the segfault, but to require the correct behavior. Mark it as
test_expect_failure for now too, since this second bug is not yet fixed.
t7607 had a test added in 30fd3a5425 (merge overwrites unstaged changes in
renamed file, 2012-04-15) specific to looking for a merge overwriting a
dirty file involved in a rename, but it too actually encoded what I would
term incorrect behavior: it expected the merge to succeed. Fix that, and
add a few more checks to make sure that the merge really does produce the
expected results.
Reviewed-By: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_TRACE_CURL provides a way to debug what is being sent and received
over HTTP, with automatic redaction of sensitive information. But it
also logs data transmissions, which significantly increases the log file
size, sometimes unnecessarily. Add an option "GIT_TRACE_CURL_NO_DATA" to
allow the user to omit such data transmissions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
