When given more than one target line ranges, "git blame -La,b
-Lc,d" was over-eager to coalesce groups of original lines and
showed incorrect results, which has been corrected.
* jk/blame-coalesce-fix:
blame: only coalesce lines that are adjacent in result
t8003: factor setup out of coalesce test
t8003: check output of coalesced blame
Ring buffer with size 4 used for bin-hex translation resulted in a
wrong object name in the sequencer's todo output, which has been
corrected.
* ak/sequencer-fix-find-uniq-abbrev:
rebase -i: fix possibly wrong onto hash in todo
The commit labels used to explain each side of conflicted hunks
placed by the sequencer machinery have been made more readable by
humans.
* en/sequencer-merge-labels:
sequencer: avoid garbled merge machinery messages due to commit labels
Updates to "git merge" tests, in preparation for a new merge
strategy backend.
* en/merge-tests:
t6425: be more flexible with rename/delete conflict messages
t642[23]: be more flexible for add/add conflicts involving pair renames
t6422, t6426: be more flexible for add/add conflicts involving renames
t6423: add an explanation about why one of the tests does not pass
t6416, t6423: clarify some comments and fix some typos
t6422: fix multiple errors with the mod6 test expectations
t6423: fix test setup for a couple tests
t6416, t6422: fix incorrect untracked file count
t6422: fix bad check against missing file
t6418: tighten delete/normalize conflict testcase
Collect merge-related tests to t64xx
Earlier, to countermand the implicit "-m" option when the
"--first-parent" option is used with "git log", we added the
"--[no-]diff-merges" option in the jk/log-fp-implies-m topic. To
leave the door open to allow the "--diff-merges" option to take
values that instructs how patches for merge commits should be
computed (e.g. "cc"? "-p against first parent?"), redefine
"--diff-merges" to take non-optional value, and implement "off"
that means the same thing as "--no-diff-merges".
* so/log-diff-merges-opt:
t/t4013: add test for --diff-merges=off
doc/git-log: describe --diff-merges=off
revision: change "--diff-merges" option to require parameter
"git log --first-parent -p" showed patches only for single-parent
commits on the first-parent chain; the "--first-parent" option has
been made to imply "-m". Use "--no-diff-merges" to restore the
previous behaviour to omit patches for merge commits.
* jk/log-fp-implies-m:
doc/git-log: clarify handling of merge commit diffs
doc/git-log: move "-t" into diff-options list
doc/git-log: drop "-r" diff option
doc/git-log: move "Diff Formatting" from rev-list-options
log: enable "-m" automatically with "--first-parent"
revision: add "--no-diff-merges" option to counteract "-m"
log: drop "--cc implies -m" logic
Recent versions of "git diff-files" shows a diff between the index
and the working tree for "intent-to-add" paths as a "new file"
patch; "git apply --cached" should be able to take "git diff-files"
and should act as an equivalent to "git add" for the path, but the
command failed to do so for such a path.
* rp/apply-cached-with-i-t-a:
t4140: test apply with i-t-a paths
apply: make i-t-a entries never match worktree
apply: allow "new file" patches on i-t-a entries
"git bisect" learns the "--first-parent" option to find the first
breakage along the first-parent chain.
* al/bisect-first-parent:
bisect: combine args passed to find_bisection()
bisect: introduce first-parent flag
cmd_bisect__helper: defer parsing no-checkout flag
rev-list: allow bisect and first-parent flags
t6030: modernize "git bisect run" tests
Further preliminary change to refs API.
* hn/reftable-prep-part-2:
Make HEAD a PSEUDOREF rather than PER_WORKTREE.
Modify pseudo refs through ref backend storage
t1400: use git rev-parse for testing PSEUDOREF existence
Stop when "sendmail.*" configuration variables are defined, which
could be a mistaken attempt to define "sendemail.*" variables.
* dd/send-email-config:
git-send-email: die if sendmail.* config is set
The logic to find the ref transaction hook script attempted to
cache the path to the found hook without realizing that it needed
to keep a copied value, as the API it used returned a transitory
buffer space. This has been corrected.
* ps/ref-transaction-hook:
t1416: avoid hard-coded sha1 ids
refs: fix interleaving hook calls with reference-transaction hook
sequencer's get_message() exists to provide good labels on conflict
hunks; see commits
d68565402a ("revert: clarify label on conflict hunks", 2010-03-20)
bf975d379d ("cherry-pick, revert: add a label for ancestor", 2010-03-20)
043a4492b3 ("sequencer: factor code out of revert builtin", 2012-01-11).
for background on this function. These labels are of the form
<commitID>... <commit summary>
or
parent of <commitID>... <commit summary>
These labels are then passed as branch names to the merge machinery.
However, these labels, as formatted, often also serve to confuse. For
example, if we have a rename involved in a content merge, then it
results in text such as the following:
<<<<<<<< HEAD:foo.c
int j;
========
int counter;
>>>>>>>> b01dface... Removed unnecessary stuff:bar.c
Or in various conflict messages, it can make it very difficult to read:
CONFLICT (rename/delete): foo.c deleted in b01dface... Removed
unnecessary stuff and renamed in HEAD. Version HEAD of foo.c left
in tree.
CONFLICT (file location): dir1/foo.c added in b01dface... Removed
unnecessary stuff inside a directory that was renamed in HEAD,
suggesting it should perhaps be moved to dir2/foo.c.
Make a minor change to remove the ellipses and add parentheses around
the commit summary; this makes all three examples much easier to read:
<<<<<<<< HEAD:foo.c
int j;
========
int counter;
>>>>>>>> b01dface (Removed unnecessary stuff):bar.c
CONFLICT (rename/delete): foo.c deleted in b01dface (Removed
unnecessary stuff) and renamed in HEAD. Version HEAD of foo.c left
in tree.
CONFLICT (file location): dir1/foo.c added in b01dface (Removed
unnecessary stuff) inside a directory that was renamed in HEAD,
suggesting it should perhaps be moved to dir2/foo.c.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new helper function has_object() has been introduced to make it
easier to mark object existence checks that do and don't want to
trigger lazy fetches, and a few such checks are converted using it.
* jt/has_object:
fsck: do not lazy fetch known non-promisor object
pack-objects: no fetch when allow-{any,promisor}
apply: do not lazy fetch when applying binary
sha1-file: introduce no-lazy-fetch has_object()
'todo_list_write_to_file' may overwrite the static buffer, originating
from 'find_unique_abbrev', that was used to store the short commit hash
'c' for "# Rebase a..b onto c" message in the todo editor. This is
because the buffer that is returned from 'find_unique_abbrev' is valid
until 4 more calls to `find_unique_abbrev` are made.
As 'todo_list_write_to_file' calls 'find_unique_abbrev' for each rebased
commit, the hash for 'c' is overwritten if there are 4 or more commits
in the rebase. This behavior has been broken since its introduction.
Fix by storing the short onto commit hash in a different buffer that
remains valid, before calling 'todo_list_write_to_file'.
Found-by: Jussi Keränen <jussike@gmail.com>
Signed-off-by: Antti Keränen <detegr@rbx.email>
Acked-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After blame has finished but before we produce any output, we coalesce
groups of lines that were adjacent in the original suspect (which may
have been split apart by lines in intermediate commits which went away).
However, this can cause incorrect output if the lines are not also
adjacent in the result. For instance, the case in t8003 has:
ABC
DEF
which becomes
ABC
SPLIT
DEF
Blaming only lines 1 and 3 in the result yields two blame groups (one
for each line) that were adjacent in the original. That's enough for us
to coalesce them into a single group, but that loses information: our
output routines assume they're adjacent in the result as well, and we
output:
<oid> 1) ABC
<oid> 2) SPLIT
This is nonsense for two reasons:
- we were asked about line 3, not line 2; we should not output the
SPLIT line at all
- commit <oid> did not touch the SPLIT line at all! We found the
correct blame for line 3, but the bug is actually in the output
stage, which is showing the wrong line number and content from the
final file.
We can fix this by only coalescing when both the suspect and result
lines are adjacent. That fixes this bug, but keeps coalescing in cases
where want it (e.g., the existing test in t8003 where SPLIT goes away,
and the lines really are adjacent in the result).
Reported-by: Nuthan Munaiah <nm6061@rit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding more tests of blame's coalesce code, let's
split the setup out from the first test, and give each of the commits
a more meaningful name:
- $orig for the original source that added the lines
- $split for the version where they are split apart
- $final for the final version that re-joins them
That's not strictly necessary, but makes the follow-on tests less
brittle than relying on HEAD^, etc, to name the commits.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f0cbe742f4 (blame: add a test to cover blame_coalesce(),
2019-06-20) added a test case where blame can usefully coalesce two
groups of lines. But since it relies on the normal blame output, it only
exercises the code and can't tell whether the lines were actually
joined into a single group.
However, by using --porcelain output, we can see how git-blame considers
the groupings (and likewise how the coalescing might have a real
user-visible impact for a tool that uses the porcelain-output
groupings). This lets us confirm that we are indeed coalescing correctly
(and the fact that this test case requires coalescing can be verified by
dropping the call to blame_coalesce(), causing the test to fail).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The component to respond to "git fetch" request is made more
configurable to selectively allow or reject object filtering
specification used for partial cloning.
* tb/upload-pack-filters:
t5616: use test_i18ngrep for upload-pack errors
upload-pack.c: introduce 'uploadpackfilter.tree.maxDepth'
upload-pack.c: allow banning certain object filter(s)
list_objects_filter_options: introduce 'list_object_filter_config_name'
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
The test added by e5256c82e5 (refs: fix interleaving hook calls with
reference-transaction hook, 2020-08-07) uses hard-coded sha1 object ids
in its expected output. This causes it to fail when run with
GIT_TEST_DEFAULT_HASH=sha256.
Let's make use of the oid variables we define earlier, as the rest of
the nearby tests do.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6425 was very picky about the exact output message produced by a
rename/delete conflict, in a way that just scratches the surface of the
mess that was built into merge-recursive. The idea was that it would
try to find the possible combinations of different conflict types, and
when more than one was present for one path, it would try to provide a
combined message that covered all the cases.
There's a lot to unravel here...
First, there's a basic conflict type known as modify/delete, which is a
content conflict. It occurs when one side deletes a file, but the other
modifies it.
There is also a path conflict known as a rename/delete. This occurs
when one side deletes a path, and the other renames it. This is not a
content conflict, it is a path conflict. It will often occur in
combination with a content conflict, though, namely a modify/delete. As
such, these two were often combined.
Another type of conflict that can exist is a directory/file conflict.
For example, one side adds a new file at some path, and the other side
of history adds a directory at the same path. The path that was "added"
could have been put there by a rename, though. Thus, we have the
possibility of a single path being affected by a modify/delete, a
rename/delete, and a directory/file conflict.
In part, this was a natural by-product of merge-recursive's design.
Since it was doing a four way merge with the contents of the working
tree being the fourth factor it had to consider, it had working tree
handling spread all over the code. It also had directory/file conflict
handling spread everywhere through all the other types of conflicts.
And our testsuite has a huge number of directory/file conflict tests
because trying to get them right required modifying so many different
codepaths. A natural outgrowth of this kind of structure is conflict
messages that combine all the different types that the current codepath
is considering.
However, if we want to make the different conflict types orthogonal and
avoid repeating ourselves and getting very brittle code, then we need to
split the messages from these different conflict types apart. Besides,
trying to determine all possible permutations is a _royal_ mess. The
code to handle the rename/delete/directory/file conflict output is
already somewhat hard to parse, and is somewhat brittle. But if we
really wanted to go that route, then we'd have to have special handling
for the following types of combinations:
* rename/add/delete:
on side of history that didn't rename the given file, remove the file
instead and place an unrelated file in the way of the rename
* rename/rename(2to1)/mode conflict/delete/delete:
two different files, one executable and the other not, are renamed
to the same location, each side deletes the source file that the
other side renames
* rename/rename(1to2)/add/add:
file renamed differently on each side of history, with each side
placing an unrelated file in the way of the other
* rename/rename(1to2)/content conflict/file location/(D/F)/(D/F)/:
both sides modify a file in conflicting way, both rename that file
but to different paths, one side renames the directory which the
other side had renamed that file into causing it to possibly need a
transitive rename, and each side puts a directory in the way of the
other's path.
Let's back away from this path of insanity, and allow the different
types of conflicts to be handled by separate pieces of non-repeated code
by allowing the conflict messages to be split into their separate types.
(If multiple conflict types affect a single path, the conflict messages
can be printed sequentially.) Start this path with a simple change:
modify this test to be more flexible and accept the output either merge
backend (recursive or the new ort) will produce.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like the last commit accepted 'add/add' and 'rename/add'
interchangably, we also want to do the same for 'add/add' and
'rename/rename'. This also allows us to avoid the ambiguity in meaning
with 'rename/rename' (is it two separate files renamed to the same
location, or one file renamed on both sides but differently)?
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive treats an add/add conflict where one of the adds came
from a rename as a separate 'rename/add' type of conflict. However, if
there is not content conflict after the content merge(s), then the file
is not considered to be conflicted. That suggests the conflict type is
really just add/add. Other merge engines might choose to print messages
to the console that just refer to these as add/add conflicts; accept
both types of output.
Note: it could help to notify users if the three-way content merge of
the rename had content conflicts, because when we then go to two-way
merge THAT with the conflicting add we can get nested conflict markers.
merge-recursive, unfortunately, doesn't do that, but other merge engines
could.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I had long since forgotten the idea behind this test and why it failed,
and took a little while to figure it out. To prevent others from having
to spend a similar time on it, add an explanation in the comments.
However, the reasoning in the explanation makes me question why I
considered it a failure at all. I'm not sure if I had a better reason
when I originally wrote it, but for now just add commentary about the
possible expectations and why it behaves the way it does right now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test had multiple issues causing it to fail for the wrong
reason(s):
* rename/rename(1to2) conflicts have always left the original source
path present in the working directory and index (at stage 1). Thus,
the triple rename/rename(1to2) should result in 9 unstaged files,
not 6.
* It messed up the three-way content merge for checking the results of
merging for one of the renames, accidentally turning it into a
two-way merge.
* It got the contents of the base files it was using to compare
against wrong, due to an off-by-one error, and overwrite-redirection
('>') instead of append-redirection ('>>').
* It used slightly too-long conflict markers
* It didn't include filenames in the conflict marker hunks (granted,
that was a shortcoming of the merge-recursive backend for rename/add
and rename/rename(2to1) conflicts, but since it's
test_expect_failure anyway we might as well make it expect our
preferred behavior rather than some compromise that we can't yet
reach anyway).
Fix these issues so that a merge backend which correctly handles these
kinds of nested conflicts will pass the test.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit da1e295e00 ("t604[236]: do not run setup in separate tests",
2019-10-22) removed approximately half the tests (which were setup-only
tests) in t6043 by turning them into functions that the subsequent test
would call as their first step. This ensured that any test from this
file could be run entirely independently of all the other tests in the
file. Unfortunately, the call to the new setup function was missed in
two of the test_expect_failure cases. Add them in.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently I don't know how to count untracked files, and since the
tests in question were marked as test_expect_failure, no one ever
noticed it until now. Correct the count, as these tests clearly create
three untracked files ('out', 'err', and 'file_count').
(I believe this problem arose because earlier incarnations counted lines
via a pipe to 'wc -l'. Reviewers asked that it be replaced by writing
the output to a file and using test_line_count, but when the temporary
output was added to a separate file, the count of untracked files should
have increased.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The testcase only required that the merge complete without conflict,
without specifying what the correct resolution was. Since normalization
changed this from a modify/delete to a not-modified/delete, the correct
resolution is to have the file be removed at the end. Add a check for
this resolution.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for the merge machinery are spread over several places.
Collect them into t64xx for simplicity. Some notes:
t60[234]*.sh:
Merge tests started in t602*, overgrew bisect and remote tracking
tests in t6030, t6040, and t6041, and nearly overtook replace tests
in t6050. This made picking out relevant tests that I wanted to run
in a tighter loop slightly more annoying for years.
t303*.sh:
These started out as tests for the 'merge-recursive' toplevel command,
but did not restrict to that and had lots of overlap with the
underlying merge machinery.
t7405, t7613:
submodule-specific merge logic started out in submodule.c but was
moved to merge-recursive.c in commit 18cfc08866 ("submodule.c: move
submodule merging to merge-recursive.c", 2018-05-15). Since these
tests are about the logic found in the merge machinery, moving these
tests to be with the merge tests makes sense.
t7607, t7609:
Having tests spread all over the place makes it more likely that
additional tests related to a certain piece of logic grow in all those
other places. Much like t303*.sh, these two tests were about the
underlying merge machinery rather than outer levels.
Tests that were NOT moved:
t76[01]*.sh:
Other than the four tests mentioned above, the remaining tests in
t76[01]*.sh are related to non-recursive merge strategies, parameter
parsing, and other stuff associated with the highlevel builtin/merge.c
rather than the recursive merge machinery.
t3[45]*.sh:
The rebase testcases in t34*.sh also test the merge logic pretty
heavily; sometimes changes I make only trigger failures in the rebase
tests. The rebase tests are already nicely coupled together, though,
and I didn't want to mess that up. Similar comments apply for the
cherry-pick tests in t35*.sh.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All "mergy" operations that internally use the merge-recursive
machinery should honor the merge.renormalize configuration, but
many of them didn't.
* en/eol-attrs-gotchas:
checkout: support renormalization with checkout -m <paths>
merge: make merge.renormalize work for all uses of merge machinery
t6038: remove problematic test
t6038: make tests fail for the right reason
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
Under normal circumstances, if a test author misspells a filename passed
to test_cmp(), the error is quickly discovered when the test fails
unexpectedly due to test_cmp() being unable to find the file. However,
if the test is expected to fail, as with test_expect_failure(), a
misspelled filename as argument to test_cmp() will go unnoticed since
the test will indeed fail, but for the wrong reason. Make it easier for
test authors to discover such problems early by sanity-checking the
arguments to test_cmp(). To avoid penalizing all clients of test_cmp()
in the general case, only check for missing files if the comparison
fails.
While at it, make test_cmp_bin() sanity-check its arguments, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply --cached (as used by add -p) should accept creation and deletion
patches to intent-to-add paths in the index. apply --index, however,
should always fail because an intent-to-add path never matches the
worktree (by definition).
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon seeing a merge commit when bisecting, this option may be used to
follow only the first parent.
In detecting regressions introduced through the merging of a branch, the
merge commit will be identified as introduction of the bug and its
ancestors will be ignored.
This option is particularly useful in avoiding false positives when a
merged branch contained broken or non-buildable commits, but the merge
itself was OK.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add first_parent_only parameter to find_bisection(), removing the
barrier that prevented combining the --bisect and --first-parent flags
when using git rev-list
Based-on-patch-by: Tiago Botelho <tiagonbotelho@hotmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enforce consistent styling for tests on "git bisect run":
- Use "write_script" to abstract away platform-specific details.
- Favor current whitespace conventions.
- While at it, change "introduced" to "added" in the comments to make
them read better.
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to not repeatedly search for the reference-transaction hook in
case it's getting called multiple times, we use a caching mechanism to
only call `find_hook()` once. What was missed though is that the return
value of `find_hook()` actually comes from a static strbuf, which means
it will get overwritten when calling `find_hook()` again. As a result,
we may call the wrong hook with parameters of the reference-transaction
hook.
This scenario was spotted in the wild when executing a git-push(1) with
multiple references, where there are interleaving calls to both the
update and the reference-transaction hook. While initial calls to the
reference-transaction hook work as expected, it will stop working after
the next invocation of the update hook. The result is that we now start
calling the update hook with parameters and stdin of the
reference-transaction hook.
This commit fixes the issue by storing a copy of `find_hook()`'s return
value in the cache.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop whitespace in the value of `$test_description` and in a test body
and use `test_write_lines`.
Stop defining `$u` with a trailing space just so that we can tuck it in
like `git foo $u$more...` and get minimal whitespace in the command:
`git foo $u $more...` is more readable at the "cost" of an empty `$u`
yielding `git foo something...`.
Finally, avoid using single quotes within the test scripts to repeatedly
close and reopen the quotes that wrap the test scripts (see the previous
commit). This "unnecessary" quoting does mean that the verbose test
output shows the interpolated values, i.e., the shell code we're
running. But the downside is that the source of the script does *not*
show the shell code we're eventually executing, leaving the reader to
reason about what we really do and whether there are any quoting issues.
(There aren't.)
Where we run through loops to generate several "identical but different"
tests, the test message contains the interpolated variables we're
looping on, meaning one can always identify exactly which instance has
failed, even if the verbose test output shows the exact same test body
several times.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test scripts, the recommended style is, e.g.:
test_expect_success 'name' '
do-something somehow &&
do-some-more testing
'
When using this style, any single quote in the multi-line test section
is actually closing the lone single quotes that surround it.
It can be a non-issue in practice:
test_expect_success 'sed a little' '
sed -e 's/hi/lo/' in >out # "ok": no whitespace in s/hi/lo/
'
Or it can be a bug in the test, e.g., because variable interpolation
happens before the test even begins executing:
v=abc
test_expect_success 'variable interpolation' '
v=def &&
echo '"$v"' # abc
'
Change several such in-test single quotes to use double quotes instead
or, in a few cases, drop them altogether. These were identified using
some crude grepping. We're not fixing any test bugs here, but we're
hopefully making these tests slightly easier to grok and to maintain.
There are legitimate use cases for closing a quote and opening a new
one, e.g., both '\'' and '"'"' can be used to produce a literal single
quote. I'm not touching any of those here.
In t9401, tuck the redirecting ">" to the filename while we're touching
those lines.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying a binary patch, as an optimization, "apply" checks if the
postimage is already present. During this fetch, it is perfectly
expected for the postimage not to be present, so there is no need to
lazy-fetch missing objects. Teach "apply" not to lazy-fetch in this
case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests added to t5616 in 6dd3456a8c (upload-pack.c: allow banning
certain object filter(s), 2020-08-03) can fail racily, but only with
GETTEXT_POISON enabled.
The tests in question look something like this:
test_must_fail ok=sigpipe git clone --filter=blob:none ... 2>err &&
grep "filter blob:none not supported' err
The remote upload-pack process writes that error message both as an ERR
packet, but also via a die() message. In theory we should see the
message twice in the "err" file. The client relays the message from the
packet to its stderr (with a "remote error:" prefix), and because this
is a local-system clone, upload-pack's stderr goes to the same place.
But because clone may be writing to the pipe when upload-pack calls
die(), it may get SIGPIPE and fail to relay the message. That's why we
need our "ok=sigpipe" trick. But our grep should still work reliably in
that case. Either:
- we got SIGPIPE on the client, which means upload-pack completed its
die(), and we'll see that version of the message.
- the client didn't get SIGPIPE, and so it successfully relays the
message.
In theory we'd see both copies of the message in the second case. But
now always! As soon as the client sees ERR, it exits and we run grep.
But we have no guarantee that the upload-pack process has exited at this
point, or even written its die() message. We might only see the client
version of the message.
Normally that's OK. We only need to see one or the other to pass the
test. But now consider GETTEXT_POISON. upload-pack doesn't translate the
die() message nor the ERR packet. But once the client receives it, it
calls:
die(_("remote error: %s"), buffer + 4);
That message _is_ marked for translation. Normally we'd just replace the
"remote error:" portion of it, but in GETTEXT_POISON mode, we replace
the whole thing with "# GETTEXT POISON #" and don't include the "%s"
part at all. So the whole text from the ERR packet is dropped, and so we
may racily see a test failure if upload-pack's die() call wasn't yet
written.
We can fix it by using test_i18ngrep, which just makes this grep a noop
in the poison mode.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pretend-object mechanism checks if the given object already
exists in the object store before deciding to keep the data
in-core, but the check would have triggered lazy fetching of such
an object from a promissor remote.
* jt/pretend-object-never-come-from-elsewhere:
sha1-file: make pretend_object_file() not prefetch
While packing many objects in a repository with a promissor remote,
lazily fetching missing objects from the promissor remote one by
one may be inefficient---the code now attempts to fetch all the
missing objects in batch (obviously this won't work for a lazy
clone that lazily fetches tree objects as you cannot even enumerate
what blobs are missing until you learn which trees are missing).
* jt/pack-objects-prefetch-in-batch:
pack-objects: prefetch objects to be packed
pack-objects: refactor to oid_object_info_extended
In b79cf959b2 (upload-pack.c: allow banning certain object filter(s),
2020-02-26), we introduced functionality to disallow certain object
filters from being chosen from within 'git upload-pack'. Traditionally,
administrators use this functionality to disallow filters that are known
to perform slowly, for e.g., those that do not have bitmap-level
filtering.
In the past, the '--filter=tree:<n>' was one such filter that does not
have bitmap-level filtering support, and so was likely to be banned by
administrators.
However, in the previous couple of commits, we introduced bitmap-level
filtering for the case when 'n' is equal to '0', i.e., as if we had a
'--filter=tree:none' choice.
While it would be sufficient to simply write
$ git config uploadpackfilter.tree.allow true
(since it would allow all values of 'n'), we would like to be able to
allow this filter for certain values of 'n', i.e., those no greater than
some pre-specified maximum.
In order to do this, introduce a new configuration key, as follows:
$ git config uploadpackfilter.tree.maxDepth <m>
where '<m>' specifies the maximum allowed value of 'n' in the filter
'tree:n'. Administrators who wish to allow for only the value '0' can
write:
$ git config uploadpackfilter.tree.allow true
$ git config uploadpackfilter.tree.maxDepth 0
which allows '--filter=tree:0', but no other values.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
