"git clone" has been prepared to allow cloning a repository with
non-default hash function into a repository that uses the reftable
backend.
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
"git fetch --atomic" issued an unnecessary empty error message,
which has been corrected.
* jx/fetch-atomic-error-message-fix:
fetch: no redundant error message for atomic fetch
t5574: test porcelain output of atomic fetch
The code to parse the From e-mail header has been updated to avoid
recursion.
* jk/mailinfo-iterative-unquote-comment:
mailinfo: avoid recursion when unquoting From headers
t5100: make rfc822 comment test more careful
Code clean-up for sanity checking of command line options for "git
show-ref".
* rs/show-ref-incompatible-options:
show-ref: use die_for_incompatible_opt3()
"git checkout -B <branch> [<start-point>]" allowed a branch that is
in use in another worktree to be updated and checked out, which
might be a bit unexpected. The rule has been tightened, which is a
breaking change. "--ignore-other-worktrees" option is required to
unbreak you, if you are used to the current behaviour that "-B"
overrides the safety.
* jc/checkout-B-branch-in-use:
checkout: forbid "-B <branch>" from touching a branch used elsewhere
checkout: refactor die_if_checked_out() caller
"git bisect reset" has been taught to clean up state files and refs
even when BISECT_START file is gone.
* jk/bisect-reset-fix:
bisect: always clean on reset
"git $cmd --end-of-options --rev -- --path" for some $cmd failed
to interpret "--rev" as a rev, and "--path" as a path. This was
fixed for many programs like "reset" and "checkout".
* jk/end-of-options:
parse-options: decouple "--end-of-options" and "--"
Clean-up code that handles combinations of incompatible options.
* rs/incompatible-options-messages:
worktree: simplify incompatibility message for --orphan and commit-ish
worktree: standardize incompatibility messages
clean: factorize incompatibility message
revision, rev-parse: factorize incompatibility messages about - -exclude-hidden
revision: use die_for_incompatible_opt3() for - -graph/--reverse/--walk-reflogs
repack: use die_for_incompatible_opt3() for -A/-k/--cruft
push: use die_for_incompatible_opt4() for - -delete/--tags/--all/--mirror
The command line parser for the "log" family of commands was too
loose when parsing certain numbers, e.g., silently ignoring the
extra 'q' in "git log -n 1q" without complaining, which has been
tightened up.
* jc/revision-parse-int:
revision: parse integer arguments to --max-count, --skip, etc., more carefully
Tests update.
* ps/ref-tests-update-more:
t6301: write invalid object ID via `test-tool ref-store`
t5551: stop writing packed-refs directly
t5401: speed up creation of many branches
t4013: simplify magic parsing and drop "failure"
t3310: stop checking for reference existence via `test -f`
t1417: make `reflog --updateref` tests backend agnostic
t1410: use test-tool to create empty reflog
t1401: stop treating FETCH_HEAD as real reference
t1400: split up generic reflog tests from the reffile-specific ones
t0410: mark tests to require the reffiles backend
Command line completion (in contrib/) learned to complete path
arguments to the "add/set" subcommands of "git sparse-checkout"
better.
* en/complete-sparse-checkout:
completion: avoid user confusion in non-cone mode
completion: avoid misleading completions in cone mode
completion: fix logic for determining whether cone mode is active
completion: squelch stray errors in sparse-checkout completion
trace2 streams used to record the URLs that potentially embed
authentication material, which has been corrected.
* jh/trace2-redact-auth:
t0212: test URL redacting in EVENT format
t0211: test URL redacting in PERF format
trace2: redact passwords from https:// URLs by default
trace2: fix signature of trace2_def_param() macro
"git merge-file" learned to take the "--diff-algorithm" option to
use algorithm different from the default "myers" diff.
* ad/merge-file-diff-algo:
merge-file: add --diff-algorithm option
Clean-up code that handles combinations of incompatible options.
* rs/i18n-cannot-be-used-together:
i18n: factorize even more 'incompatible options' messages
Stale URLs have been updated to their current counterparts (or
archive.org) and HTTP links are replaced with working HTTPS links.
* js/update-urls-in-doc-and-comment:
doc: refer to internet archive
doc: update links for andre-simon.de
doc: switch links to https
doc: update links to current pages
Earlier we stopped relying on commit-graph that (still) records
information about commits that are lost from the object store,
which has negative performance implications. The default has been
flipped to disable this pessimization.
* ps/commit-graph-less-paranoid:
commit-graph: disable GIT_COMMIT_GRAPH_PARANOIA by default
Introduce "git replay", a tool meant on the server side without
working tree to recreate a history.
* cc/git-replay:
replay: stop assuming replayed branches do not diverge
replay: add --contained to rebase contained branches
replay: add --advance or 'cherry-pick' mode
replay: use standard revision ranges
replay: make it a minimal server side command
replay: remove HEAD related sanity check
replay: remove progress and info output
replay: add an important FIXME comment about gpg signing
replay: change rev walking options
replay: introduce pick_regular_commit()
replay: die() instead of failing assert()
replay: start using parse_options API
replay: introduce new builtin
t6429: remove switching aspects of fast-rebase
Simplify API implementation to delete references by eliminating
duplication.
* ps/ref-deletion-updates:
refs: remove `delete_refs` callback from backends
refs: deduplicate code to delete references
refs/files: use transactions to delete references
t5510: ensure that the packed-refs file needs locking
In the recent commit 2e87fca189 (test framework: further deprecate
test_i18ngrep, 2023-10-31), the test_i18ngrep function was
deprecated, and all the callers were updated to call the test_grep
function instead. But test_grep inherited an error message that
still refers to test_i18ngrep by mistake. Correct it so that a
broken call to the test_grep will identify itself as such.
Signed-off-by: Shreyansh Paliwal <shreyanshpaliwalcmsmn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an error occurs during an atomic fetch, a redundant error message
will appear at the end of do_fetch(). It was introduced in b3a804663c
(fetch: make `--atomic` flag cover backfilling of tags, 2022-02-17).
Because a failure message is displayed before setting retcode in the
function do_fetch(), calling error() on the err message at the end of
this function may result in redundant or empty error message to be
displayed.
We can remove the redundant error() function, because we know that
the function ref_transaction_abort() never fails. While we can find a
common pattern for calling ref_transaction_abort() by running command
"git grep -A1 ref_transaction_abort", e.g.:
if (ref_transaction_abort(transaction, &error))
error("abort: %s", error.buf);
Following this pattern, we can tolerate the return value of the function
ref_transaction_abort() being changed in the future. We also delay the
output of the err message to the end of do_fetch() to reduce redundant
code. With these changes, the test case "fetch porcelain output
(atomic)" in t5574 will also be fixed.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case "fetch porcelain output" checks output of the fetch
command. The error output must be empty with the follow assertion:
test_must_be_empty stderr
But this assertion fails if using atomic fetch. Refactor this test case
to use different fetch options by splitting it into three test cases.
1. "setup for fetch porcelain output".
2. "fetch porcelain output": for non-atomic fetch.
3. "fetch porcelain output (atomic)": for atomic fetch.
Add new command "test_commit ..." in the first test case, so that if we
run these test cases individually (--run=4-6), "git rev-parse HEAD~"
command will work properly. Run the above test cases, we can find that
one test case has a known breakage, as shown below:
ok 4 - setup for fetch porcelain output
ok 5 - fetch porcelain output # TODO known breakage vanished
not ok 6 - fetch porcelain output (atomic) # TODO known breakage
The failed test case has an error message with only the error prompt but
no message body, as follows:
'stderr' is not empty, it contains:
error:
In a later commit, we will fix this issue.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "check-chainlint" target runs automatically when running tests and
performs self-checks to verify that the chainlinter itself produces the
expected output. Originally, the chainlinter was implemented via sed,
but the infrastructure has been rewritten in fb41727b7e (t: retire
unused chainlint.sed, 2022-09-01) to use a Perl script instead.
The rewrite caused some slight whitespace changes in the output that are
ultimately not of much importance. In order to be able to assert that
the actual chainlinter errors match our expectations we thus have to
ignore whitespace characters when diffing them. As the `-w` flag is not
in POSIX we try to use `git diff -w --no-index` before we fall back to
`diff -w -u`.
To accomodate for cases where the host system has no Git installation we
use the locally-compiled version of Git. This can result in problems
though when the Git project's repository is using extensions that the
locally-compiled version of Git doesn't understand. It will refuse to
run and thus cause the checks to fail.
Instead of improving the detection logic, fix our ".expect" files so
that we do not need any post-processing at all anymore. This allows us
to drop the `-w` flag when diffing so that we can always use diff(1)
now.
Note that we keep some of the post-processing of `chainlint.pl` output
intact to strip leading line numbers generated by the script. Having
these would cause a rippling effect whenever we add a new test that
sorts into the middle of existing tests and would require us to
renumerate all subsequent lines, which seems rather pointless.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When processing "From" headers in an email, mailinfo "unquotes" quoted
strings and rfc822 parenthesized comments. For quoted strings, we
actually remove the double-quotes, so:
From: "A U Thor" <someone@example.com>
become:
Author: A U Thor
Email: someone@example.com
But for comments, we leave the outer parentheses in place, so:
From: A U (this is a comment) Thor <someone@example.com>
becomes:
Author: A U (this is a comment) Thor
Email: someone@example.com
So what is the comment "unquoting" actually doing? In our code, being in
a comment section has exactly two effects:
1. We'll unquote backslash-escaped characters inside a comment
section.
2. We _won't_ unquote double-quoted strings inside a comment section.
Our test for comments in t5100 checks this:
From: "A U Thor" <somebody@example.com> (this is \(really\) a comment (honestly))
So it is covering (1), but not (2). Let's add in a quoted string to
cover this.
Moreover, because the comment appears at the end of the From header,
there's nothing to confirm that we correctly found the end of the
comment section (and not just the end-of-string). Let's instead move it
to the beginning of the header, which means we can confirm that the
existing quoted string is detected (which will only happen if we know
we've left the comment block).
As expected, the test continues to pass, but this will give us more
confidence as we refactor the code in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -B <branch> [<start-point>]", being a "forced" version
of "-b", switches to the <branch>, after optionally resetting its
tip to the <start-point>, even if the <branch> is in use in another
worktree, which is somewhat unexpected.
Protect the <branch> using the same logic that forbids "git checkout
<branch>" from touching a branch that is in use elsewhere.
This is a breaking change that may deserve backward compatibliity
warning in the Release Notes. The "--ignore-other-worktrees" option
can be used as an escape hatch if the finger memory of existing
users depend on the current behaviour of "-B".
Reported-by: Willem Verstraeten <willem.verstraeten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f4ee22b526 (ref-filter: add tests for objectsize:disk, 2018-12-24)
hard-coded the expected object sizes. Coincidentally the size of commit
and tag is the same with zlib at the default compression level.
1f5f8f3e85 (t6300: abstract away SHA-1-specific constants, 2020-02-22)
encoded the sizes as a single value, which coincidentally also works
with sha256.
Different compression libraries like zlib-ng may arrive at different
values. Get them from the file system instead of hard-coding them to
make switching the compression library (or changing the compression
level) easier.
Reported-by: Ondrej Pohorelsky <opohorel@redhat.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When processing a header like a "From" line, mailinfo uses
unquote_quoted_pair() to handle double-quotes and rfc822 parenthesized
comments. It takes a NUL-terminated string on input, and loops over the
"in" pointer until it sees the NUL. When it finds the start of an
interesting block, it delegates to helper functions which also increment
"in", and return the updated pointer.
But there's a bug here: the helpers find the NUL with a post-increment
in the loop condition, like:
while ((c = *in++) != 0)
So when they do see a NUL (rather than the correct termination of the
quote or comment section), they return "in" as one _past_ the NUL
terminator. And thus the outer loop in unquote_quoted_pair() does not
realize we hit the NUL, and keeps reading past the end of the buffer.
We should instead make sure to return "in" positioned at the NUL, so
that the caller knows to stop their loop, too. A hacky way to do this is
to return "in - 1" after leaving the inner loop. But a slightly cleaner
solution is to avoid incrementing "in" until we are sure it contained a
non-NUL byte (i.e., doing it inside the loop body).
The two tests here show off the problem. Since we check the output,
they'll _usually_ report a failure in a normal build, but it depends on
what garbage bytes are found after the heap buffer. Building with
SANITIZE=address reliably notices the problem. The outcome (both the
exit code and the exact bytes) are just what Git happens to produce for
these cases today, and shouldn't be taken as an endorsement. It might be
reasonable to abort on an unterminated string, for example. The priority
for this patch is fixing the out-of-bounds memory access.
Reported-by: Carlos Andrés Ramírez Cataño <antaigroupltda@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're currently creating the reference database with a potentially
incorrect object format when the remote repository's object format is
different from the local default object format. This works just fine for
now because the files backend never records the object format anywhere.
But this logic will fail with any new reference backend that encodes
this information in some form either on-disk or in-memory.
The preceding commits have reshuffled code in git-clone(1) so that there
is no code path that will access the reference database before we have
detected the remote's object format. With these refactorings we can now
defer initialization of the reference database until after we have
learned the remote's object format and thus initialize it with the
correct format from the get-go.
These refactorings are required to make git-clone(1) work with the
upcoming reftable backend when cloning repositories with the SHA256
object format.
This change breaks a test in "t5550-http-fetch-dumb.sh" when cloning an
empty repository with `GIT_TEST_DEFAULT_HASH=sha256`. The test expects
the resulting hash format of the empty cloned repository to match the
default hash, but now we always end up with a sha1 repository. The
problem is that for dumb HTTP fetches, we have no easy way to figure out
the remote's hash function except for deriving it based on the hash
length of refs in `info/refs`. But as the remote repository is empty we
cannot rely on this detection mechanism.
Before the change in this commit we already initialized the repository
with the default hash function and then left it as-is. With this patch
we always use the hash function detected via the remote, where we fall
back to "sha1" in case we cannot detect it.
Neither the old nor the new behaviour are correct as we second-guess the
remote hash function in both cases. But given that this is a rather
unlikely edge case (we use the dumb HTTP protocol, the remote repository
uses SHA256 and the remote repository is empty), let's simply adapt the
test to assert the new behaviour. If we want to properly address this
edge case in the future we will have to extend the dumb HTTP protocol so
that we can properly detect the hash function for empty repositories.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create the reference database in git-clone(1) quite early before
connecting to the remote repository. Given that we do not yet know about
the object format that the remote repository uses at that point in time
the consequence is that the refdb may be initialized with the wrong
object format.
This is not a problem in the context of the files backend as we do not
encode the object format anywhere, and furthermore the only reference
that we write between initializing the refdb and learning about the
object format is the "HEAD" symref. It will become a problem though once
we land the reftable backend, which indeed does require to know about
the proper object format at the time of creation. We thus need to
rearrange the logic in git-clone(1) so that we only initialize the refdb
once we have learned about the actual object format.
As a first step, move listing of remote references to happen earlier,
which also allow us to set up the hash algorithm of the repository
earlier now. While we aim to execute this logic as late as possible
until after most of the setup has happened already, detection of the
object format and thus later the setup of the reference database must
happen before any other logic that may spawn Git commands or otherwise
these Git commands may not recognize the repository as such.
The first Git step where we expect the repository to be fully initalized
is when we fetch bundles via bundle URIs. Funny enough, the comments
there also state that "the_repository must match the cloned repo", which
is indeed not necessarily the case for the hash algorithm right now. So
in practice it is the right thing to detect the remote's object format
before downloading bundle URIs anyway, and not doing so causes clones
with bundle URIs to fail when the local default object format does not
match the remote repository's format.
Unfortunately though, this creates a new issue: downloading bundles may
take a long time, so if we list refs beforehand they might've grown
stale meanwhile. It is not clear how to solve this issue except for a
second reference listing though after we have downloaded the bundles,
which may be an expensive thing to do.
Arguably though, it's preferable to have a staleness issue compared to
being unable to clone a repository altogether.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard message for reporting the use of multiple mutually
exclusive options by calling die_for_incompatible_opt3() instead of
rolling our own. This has the benefits of showing only the actually
given options, reducing the number of strings to translate and making
the UI slightly more consistent.
Adjust the test to no longer insist on a specific order of the
reported options, as this implementation detail does not affect the
usefulness of the error message.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Newer versions of Getopt::Long started giving warnings against our
(ab)use of it in "git send-email". Bump the minimum version
requirement for Perl to 5.8.1 (from September 2002) to allow
simplifying our implementation.
* tz/send-email-negatable-options:
send-email: avoid duplicate specification warnings
perl: bump the required Perl version to 5.8.1 from 5.8.0
"git rebase --autosquash" is now enabled for non-interactive rebase,
but it is still incompatible with the apply backend.
* ak/rebase-autosquash:
rebase: rewrite --(no-)autosquash documentation
rebase: support --autosquash without -i
rebase: fully ignore rebase.autoSquash without -i
"git for-each-ref --no-sort" still sorted the refs alphabetically
which paid non-trivial cost. It has been redefined to show output
in an unspecified order, to allow certain optimizations to take
advantage of.
* vd/for-each-ref-unsorted-optimization:
t/perf: add perf tests for for-each-ref
ref-filter.c: use peeled tag for '*' format fields
for-each-ref: clean up documentation of --format
ref-filter.c: filter & format refs in the same callback
ref-filter.c: refactor to create common helper functions
ref-filter.c: rename 'ref_filter_handler()' to 'filter_one()'
ref-filter.h: add functions for filter/format & format-only
ref-filter.h: move contains caches into filter
ref-filter.h: add max_count and omit_empty to ref_format
ref-filter.c: really don't sort when using --no-sort
Test and shell scripts clean-up.
* ps/ban-a-or-o-operator-with-test:
Makefile: stop using `test -o` when unlinking duplicate executables
contrib/subtree: convert subtree type check to use case statement
contrib/subtree: stop using `-o` to test for number of args
global: convert trivial usages of `test <expr> -a/-o <expr>`
"git format-patch --encode-email-headers" ignored the option when
preparing the cover letter, which has been corrected.
* ss/format-patch-use-encode-headers-for-cover-letter:
format-patch: fix ignored encode_email_headers for cover letter
Update ref-related tests.
* ps/ref-tests-update:
t: mark several tests that assume the files backend with REFFILES
t7900: assert the absence of refs via git-for-each-ref(1)
t7300: assert exact states of repo
t4207: delete replace references via git-update-ref(1)
t1450: convert tests to remove worktrees via git-worktree(1)
t: convert tests to not access reflog via the filesystem
t: convert tests to not access symrefs via the filesystem
t: convert tests to not write references via the filesystem
t: allow skipping expected object ID in `ref-store update-ref`
"git add" and "git stash" learned to support the ":(attr:...)"
magic pathspec.
* jw/git-add-attr-pathspec:
attr: enable attr pathspec magic for git-add and git-stash
Code clean-up for jk/chunk-bounds topic.
* jk/chunk-bounds-more:
commit-graph: mark chunk error messages for translation
commit-graph: drop verify_commit_graph_lite()
commit-graph: check order while reading fanout chunk
commit-graph: use fanout value for graph size
commit-graph: abort as soon as we see a bogus chunk
commit-graph: clarify missing-chunk error messages
commit-graph: drop redundant call to "lite" verification
midx: check consistency of fanout table
commit-graph: handle overflow in chunk_size checks
Add support for GitLab CI.
* ps/ci-gitlab:
ci: add support for GitLab CI
ci: install test dependencies for linux-musl
ci: squelch warnings when testing with unusable Git repo
ci: unify setup of some environment variables
ci: split out logic to set up failed test artifacts
ci: group installation of Docker dependencies
ci: make grouping setup more generic
ci: reorder definitions for grouping functions
Update the base topic to work with CMake builds.
* js/doc-unit-tests-with-cmake:
cmake: handle also unit tests
cmake: use test names instead of full paths
cmake: fix typo in variable name
artifacts-tar: when including `.dll` files, don't forget the unit-tests
unit-tests: do show relative file paths
unit-tests: do not mistake `.pdb` files for being executable
cmake: also build unit tests
Process to add some form of low-level unit tests has started.
* js/doc-unit-tests:
ci: run unit tests in CI
unit tests: add TAP unit test framework
unit tests: add a project plan document
The "rev-list" and other commands in the "log" family, being the
oldest part of the system, use their own custom argument parsers,
and integer values of some options are parsed with atoi(), which
allows a non-digit after the number (e.g., "1q") to be silently
ignored. As a natural consequence, an argument that does not begin
with a digit (e.g., "q") silently becomes zero, too.
Switch to use strtol_i() and parse_timestamp() appropriately to
catch bogus input.
Note that one may naïvely expect that --max-count, --skip, etc., to
only take non-negative values, but we must allow them to also take
negative values, as an escape hatch to countermand a limit set by an
earlier option on the command line; the underlying variables are
initialized to (-1) and "--max-count=-1", for example, is a
legitimate way to reinitialize the limit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually "bisect reset" cleans up any refs/bisect/ refs, along with
meta-files like .git/BISECT_LOG. But it only does so after deciding that
a bisection is active, which it does by reading BISECT_START. This is
usually fine, but it's possible to get into a confusing state if the
BISECT_START file is gone, but other cruft is left (this might be due to
a bug, or a system crash, etc).
And since "bisect reset" refuses to do anything in this state, the user
has no easy way to clean up the leftover cruft. While another "bisect
start" would clear the state, in the interim it can be annoying, as
other tools (like our bash prompt code) think we are bisecting, and
for-each-ref output may be polluted with refs/bisect/ entries.
Further adding to the confusion is that running "bisect reset $some_ref"
skips the BISECT_START check. So it never realizes that there's no
bisection active and does the cleanup anyway!
So let's just make sure we always do the cleanup, whether we looked at
BISECT_START or not. If the user doesn't give us a commit to reset to,
we'll still say "We are not bisecting" and skip the call to "git
checkout".
Reported-by: Janik Haag <janik@aq0.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we added generic end-of-options support in 51b4594b40
(parse-options: allow --end-of-options as a synonym for "--",
2019-08-06), we made them true synonyms. They both stop option parsing,
and they are both returned in the resulting argv if the KEEP_DASHDASH
flag is used.
The hope was that this would work for all callers:
- most generic callers would not pass KEEP_DASHDASH, and so would just
do the right thing (stop parsing there) without needing to know
anything more.
- callers with KEEP_DASHDASH were generally going to rely on
setup_revisions(), which knew to handle --end-of-options specially
But that turned out miss quite a few cases that pass KEEP_DASHDASH but
do their own manual parsing. For example, "git reset", "git checkout",
and so on want pass KEEP_DASHDASH so they can support:
git reset $revs -- $paths
but of course aren't going to actually do a traversal, so they don't
call setup_revisions(). And those cases currently get confused by
--end-of-options being left in place, like:
$ git reset --end-of-options HEAD
fatal: option '--end-of-options' must come before non-option arguments
We could teach each of these callers to handle the leftover option
explicitly. But let's try to be a bit more clever and see if we can
solve it centrally in parse-options.c.
The bogus assumption here is that KEEP_DASHDASH tells us the caller
wants to see --end-of-options in the result. But really, the callers
which need to know that --end-of-options was reached are those that may
potentially parse more options from argv. In other words, those that
pass the KEEP_UNKNOWN_OPT flag.
If such a caller is aware of --end-of-options (e.g., because they call
setup_revisions() with the result), then this will continue to do the
right thing, treating anything after --end-of-options as a non-option.
And if the caller is not aware of --end-of-options, they are better off
keeping it intact, because either:
1. They are just passing the options along to somebody else anyway, in
which case that somebody would need to know about the
--end-of-options marker.
2. They are going to parse the remainder themselves, at which point
choking on --end-of-options is much better than having it silently
removed. The point is to avoid option injection from untrusted
command line arguments, and bailing is better than quietly treating
the untrusted argument as an option.
This fixes bugs with --end-of-options across several commands, but I've
focused on two in particular here:
- t7102 confirms that "git reset --end-of-options --foo" now works.
This checks two things. One, that we no longer barf on
"--end-of-options" itself (which previously we did, even if the rev
was something vanilla like "HEAD" instead of "--foo"). And two, that
we correctly treat "--foo" as a revision rather than an option.
This fix applies to any other cases which pass KEEP_DASHDASH but not
KEEP_UNKNOWN_OPT, like "git checkout", "git check-attr", "git grep",
etc, which would previously choke on "--end-of-options".
- t9350 shows the opposite case: fast-export passed KEEP_UNKNOWN_OPT
but not KEEP_DASHDASH, but then passed the result on to
setup_revisions(). So it never saw --end-of-options, and would
erroneously parse "fast-export --end-of-options --foo" as having a
"--foo" option. This is now fixed.
Note that this does shut the door for callers which want to know if we
hit end-of-options, but don't otherwise need to keep unknown opts. The
obvious thing here is feeding it to the DWIM verify_filename()
machinery. And indeed, this is a problem even for commands which do
understand --end-of-options already. For example, without this patch,
you get:
$ git log --end-of-options --foo
fatal: option '--foo' must come before non-option arguments
because we refuse to accept "--foo" as a filename (because it starts
with a dash) even though we could know that we saw end-of-options. The
verify_filename() function simply doesn't accept this extra information.
So that is the status quo, and this patch doubles down further on that.
Commands like "git reset" have the same problem, but they won't even
know that parse-options saw --end-of-options! So even if we fixed
verify_filename(), they wouldn't have anything to pass to it.
But in practice I don't think this is a big deal. If you are being
careful enough to use --end-of-options, then you should also be using
"--" to disambiguate and avoid the DWIM behavior in the first place. In
other words, doing:
git log --end-of-options --this-is-a-rev -- --this-is-a-path
works correctly, and will continue to do so. And likewise, with this
patch now:
git reset --end-of-options --this-is-a-rev -- --this-is-a-path
will work, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard parameterized message for reporting incompatible
options for worktree add. This reduces the number of strings to
translate and makes the UI slightly more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard parameterized message for reporting incompatible
options to report options that are not accepted in combination with
--exclude-hidden. This reduces the number of strings to translate and
makes the UI a bit more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
