These unused parameters were marked in a68ec8683a (reftable: mark unused
parameters in virtual functions, 2024-08-17), but the functions were
moved to a new file in a parallel branch via f2406c81b9
(reftable/generic: move generic iterator code into iterator interface,
2024-08-22).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is conceptually the same as the cases in df9d638c24 (unit-tests:
ignore unused argc/argv, 2024-08-17), but this unit test was migrated
from the reftable tests in a parallel branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that -Wunused-parameter is on by default for DEVELOPER=1 builds,
people may trigger it, blocking their build. When it's a mistake for the
parameter to exist, the path forward is obvious: remove it. But
sometimes you need to suppress the warning, and the "UNUSED" mechanism
for that is specific to our project, so people may not know about it.
Let's put some advice in CodingGuidelines, including an example warning
message. That should help people who grep for the warning text after
seeing it from the compiler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having now removed or annotated all of the unused function parameters in
our code base, I found that each instance falls into one of three
categories:
1. ignoring the parameter is a bug (e.g., a function takes a ptr/len
pair, but ignores the length). Detecting these helps us find the
bugs.
2. the parameter is unnecessary (and usually left over from a
refactoring or earlier iteration of a patches series). Removing
these cleans up the code.
3. the function has to conform to a specific interface (because it's
used via a function pointer, or matches something on the other side
of an #ifdef). These ones are annoying, but annotating them with
UNUSED is not too bad (especially if the compiler tells you about
the problem promptly).
Certainly instances of (3) are more common than (1), but after finding
all of these, I think there were enough cases of (1) that it justifies
the work in annotating all of the (3)s.
And since the code base is now at a spot where we compile cleanly with
-Wunused-parameter, turning it on will make it the responsibility of
individual patch writers going forward.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compat/ directory contains many stub functions, wrappers, and so on
that have to conform to a specific interface, but don't necessarily need
to use all of their parameters. Let's mark them to avoid complaints from
-Wunused-parameter.
This was done mostly via guess-and-check with the Windows build in
GitHub CI. I also confirmed that the win+VS build is similarly happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the files touched in the previous commit, win32/headless.c does
not include git-compat-util.h, so it doesn't have our UNUSED macro.
Unlike those ones, this is not third-party code, so it would not be a
big deal to modify it.
However, I'm not sure if including git-compat-util.h would create other
headaches (and I don't even have a machine to test this on; I'm relying
on Windows CI to compile it at all). Given how trivial the file is, and
that the unused parameters are not interesting (they are just
boilerplate for the wWinMain() function), we can just use the same trick
as the previous commit and disable the warnings via pragma.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We carry some vendored 3rd-party code in compat/ that does not build
cleanly with -Wunused-parameters. We could mark these with UNUSED, but
there are two reasons not to:
1. This is code imported from elsewhere, so we'd prefer to avoid
modifying it in an invasive way that could create conflicts if we
tried to pull in a new version.
2. These files don't include git-compat-util.h at all, so we'd need to
factor out (or repeat) our UNUSED macro.
In theory we could modify the build process to invoke the compiler with
the extra warning disabled for these files, but there are tricky corner
cases there (e.g., for NO_REGEX we cannot assume that the compiler
understands -Wno-unused-parameter as an option, so we'd have to use our
detect-compiler script).
Instead, let's rely on the gcc diagnostic #pragma. This is horribly
unportable, of course, but it should do what we want. Compilers which
don't understand this particular pragma should ignore it (per the
standard), and compilers which do care about "-Wunused-parameter" will
hopefully respect it, even if they are not gcc (e.g., clang does).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This spot was originally marked in in 4695c3f3a9 (reftable: mark unused
parameters in virtual functions, 2024-08-17), but was copied in
5b539a5361 (t: move reftable/readwrite_test.c to the unit testing
framework, 2024-08-13).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d1ae15d68b (builtin/gc: refactor to read config into structure,
2024-08-16) added a new parameter to the maintenance_task virtual
functions, but most of them don't need to look at it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, a user may be generating a patch for an old commit which
now has an out-of-date author or other identity. For example, consider a
team member who contributes to an internal fork of an upstream project,
but leaves before this change is submitted upstream.
In this case, the team members company address may no longer be valid,
and will thus bounce when sending email.
This can be manually avoided by editing the generated patch files, or by
carefully using --suppress-<cc|to> options. This requires a lot of
manual intervention and is easy to forget.
Git has support for mapping old email addresses and names to a canonical
name and address via the .mailmap file (and its associated mailmap.file,
mailmap.blob, and log.mailmap options).
Teach git send-email to enable mailmap support for all addresses. This
ensures that addresses point to the canonical real name and email
address.
Add the sendemail.mailmap configuration option and its associated
--mailmap (and --use-mailmap for compatibility with git log) options.
For now, the default behavior is to disable the mailmap in order to
avoid any surprises or breaking any existing setups.
These options support per-identity configuration via the
sendemail.identity configuration blocks. This enables identity-specific
configuration in cases where users may not want to enable support.
In addition, support send-email specific mailmap data via
sendemail.mailmap.file, sendemail.mailmap.blob and their
identity-specific variants.
The intention of these options is to enable mapping addresses which are
no longer valid to a current project or team maintainer. Such mappings
may change the actual person being referred to, and may not make sense
in a traditional mailmap file which is intended for updating canonical
name and address for the same individual.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git check-mailmap command reads the mailmap from either the default
.mailmap location and then from the mailmap.blob and mailmap.file
configurations.
A following change to git send-email will want to support new
configuration options based on the configured identity. The
identity-based configuration and options only make sense in the context
of git send-email.
Expose the read_mailmap_file and read_mailmap_blob functions from
mailmap.c. Teach git check-mailmap the --mailmap-file and
--mailmap-blob options which load the additional mailmap sources.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git check-mailmap splits each provided contact using split_ident_line.
This function requires that the contact either be of the form "Name
<user@host>" or of the form "<user@host>". In particular, if the mail
portion of the contact is not surrounded by angle brackets,
split_ident_line will reject it.
This results in git check-mailmap rejecting attempts to translate simple
email addresses:
$ git check-mailmap user@host
fatal: unable to parse contact: user@host
This limits the usability of check-mailmap as it requires placing angle
brackets around plain email addresses.
In particular, attempting to use git check-mailmap to support mapping
addresses in git send-email is not straight forward. The sanitization
and validation functions in git send-email strip angle brackets from
plain email addresses. It is not trivial to add brackets prior to
invoking git check-mailmap.
Instead, modify check_mailmap() to allow such strings as contacts. In
particular, treat any line which cannot be split by split_ident_line as
a simple email address.
No attempt is made to actually parse the address line, or validate that
it is actually an email address. Implementing such validation is not
trivial. Besides, we weren't validating the address between angle
brackets before anyways.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `write_reused_pack_one()` defines an header to store the
OFS_DELTA header, but uses the constant "10" instead of
"MAX_PACK_OBJECT_HEADER" (as is done elsewhere in the same patch, circa
bb514de356 (pack-objects: improve partial packfile reuse, 2019-12-18)).
Declare the `ofs_header` field to be sized according to
`MAX_PACK_OBJECT_HEADER` (which is 10, as defined in "pack.h") instead
of the constant 10.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `try_partial_reuse()`, the (sole) caller from the function
`reuse_partial_packfile_from_bitmap_1()` has to translate its bit
position to a pack position.
In the MIDX bitmap case, the caller translates from the bit position, to
a position in the MIDX's pseudo-pack order (with `pack_pos_to_midx()`),
then get a pack offset (with `nth_midxed_offset()`) before finally
working backwards to get the pack position in the source pack by calling
`offset_to_pack_pos()`.
In the non-MIDX bitmap case, we can use the bit position as the pack
position directly (see the comment at the beginning of the
`reuse_partial_packfile_from_bitmap_1()` function for why).
In either case, the first thing that `try_partial_reuse()` does after
being called is determine the offset of the object at the given pack
position by calling `pack_pos_to_offset()`. But we already have that
information in the MIDX case!
Avoid re-computing that information by instead passing it in. In the
MIDX case, we already have that information stored. In the non-MIDX
case, the call to `pack_pos_to_offset()` moves from the function
`try_partial_reuse()` to its caller. In total, we'll save one call to
`pack_pos_to_offset()` when processing MIDX bitmaps.
(On my machine, there is a slight speed-up on the order of ~2ms, but it
is within the margin of error over 10 runs, so I think you'd have to
have a truly gigantic repository to confidently measure any significant
improvement here).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reusing chunks verbatim from an existing source pack, the function
write_reused_pack() first attempts to reuse whole words (via the
function `write_reused_pack_verbatim()`), and then individual bits (via
`write_reused_pack_one()`).
In the non-MIDX case, all of this code works fine. Likewise, in the MIDX
case, processing bits individually from the first (preferred) pack works
fine. However, processing subsequent packs in the MIDX case is broken
when there are duplicate objects among the set of MIDX'd packs.
This is because we treat the individual bit positions as valid pack
positions within the source pack(s), which does not account for gaps in
the source pack, like we see when the MIDX must break ties between
duplicate objects which appear in multiple packs.
The broken code looks like:
for (; i < reuse_packfile_bitmap->word_alloc; i++) {
for (offset = 0; offset < BITS_IN_EWORD, offset++) {
/* ... */
write_reused_pack_one(reuse_packfile->p,
pos + offset - reuse_packfile->bitmap_pos,
f, pack_start, &w_curs);
}
}
, where the second argument is incorrect and does not account for gaps.
Instead, make sure that we translate bit positions in the MIDX's
pseudo-pack order to pack positions in the respective source packs by:
- Translating the bit position (pseudo-pack order) to a MIDX position
(lexical order).
- Use the MIDX position to obtain the offset at which the given object
occurs in the source pack.
- Then translate that offset back into a pack relative position within
the source pack by calling offset_to_pack_pos().
After doing this, then we can safely use the result as a pack position.
Note that when doing single-pack reuse, as well as reusing objects from
the MIDX's preferred pack, such translation is not necessary, since
either ties are broken in favor of the preferred pack, or there are no
ties to break at all (in the case of non-MIDX bitmaps).
Failing to do this can result in strange failure modes. One example that
can occur when misinterpreting bits in the above fashion is that Git
thinks it's supposed to send a delta that the caller does not want.
Under this (incorrect) assumption, we try to look up the delta's base
(so that we can patch any OFS_DELTAs if necessary). We do this using
find_reused_offset().
But if we try and call that function for an offset belonging to an
object we did not send, we'll get back garbage. This can result in us
computing a negative fixup value, which results in memory corruption
when trying to write the (patched) OFS_DELTA header.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit will need to use the bitmap's MIDX (if one exists) to
translate bit positions into pack-relative positions in the source pack.
Ordinarily, we'd use the "midx" field of the bitmap_index struct. But
since that struct is defined within pack-bitmap.c, and our caller is in
a separate compilation unit, we do not have access to the MIDX field.
Instead, add a "from_midx" field to the bitmapped_pack structure so that
we can use that piece of data from outside of pack-bitmap.c. The caller
that uses this new piece of information will be added in the following
commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our tests for multi-pack reuse, we have two helper functions:
- test_pack_objects_reused_all(), and
- test_pack_objects_reused()
which invoke pack-objects (either with `--all`, or the supplied tips via
stdin, respectively) and ensure that (a) the number of reused objects,
and (b) the number of packs which those objects were reused from both
match the expected values.
Both functions discard the output of pack-objects and assert only on the
contents of the trace2 stream.
However, if we store the pack and attempt to index it with `--strict`,
we find that a number of our tests are broken, indicating a bug within
multi-pack reuse.
That bug will be addressed in a subsequent commit. But let's first
harden these tests by trying to index the resulting pack, marking the
tests which fail appropriately.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis says --regexp=<regexp> but the --regexp option is a
Boolean that says "the name given is not literal, but a pattern to
match the name".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git config --get-all foo.bar" shows all values for the foo.bar
variable, but does not give the variable name in each output entry.
Hence it is equivalent to "git config get --all foo.bar", without
"--show-names", in the more modern syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git for-each-ref' learned a new "--format" atom to find the branch
that the history leading to a given commit "%(is-base:<commit>)" is
likely based on.
* ds/for-each-ref-is-base:
p1500: add is-base performance tests
for-each-ref: add 'is-base' token
commit: add gentle reference lookup method
commit-reach: add get_branch_base_for_tip
"git send-email" learned "--translate-aliases" option that reads
addresses from the standard input and emits the result of applying
aliases on them to the standard output.
* jk/send-email-translate-aliases:
send-email: teach git send-email option to translate aliases
t9001-send-email.sh: update alias list used for pine test
t9001-send-email.sh: fix quoting for mailrc --dump-aliases test
Mark unused parameters as UNUSED to squelch -Wunused warnings.
* jk/mark-unused-parameters:
t-hashmap: stop calling setup() for t_intern() test
scalar: mark unused parameters in dummy function
daemon: mark unused parameters in non-posix fallbacks
setup: mark unused parameter in config callback
test-mergesort: mark unused parameters in trivial callback
t-hashmap: mark unused parameters in callback function
reftable: mark unused parameters in virtual functions
reftable: drop obsolete test function declarations
reftable: ignore unused argc/argv in test functions
unit-tests: ignore unused argc/argv
t/helper: mark more unused argv/argc arguments
oss-fuzz: mark unused argv/argc argument
refs: mark unused parameters in do_for_each_reflog_helper()
refs: mark unused parameters in ref_store fsck callbacks
update-ref: mark more unused parameters in parser callbacks
imap-send: mark unused parameter in ssl_socket_connect() fallback
Drop unused parameters from functions.
* jk/drop-unused-parameters:
diff-lib: drop unused index argument from get_stat_data()
ref-filter: drop unused parameters from email_atom_option_parser()
pack-bitmap: drop unused parameters from select_pseudo_merges()
pack-bitmap: load writer config from repository parameter
refs: drop some unused parameters from create_symref_lock()
We created a useless pseudo-merge reachability bitmap that is about
0 commits, and attempted to include commits that are not in packs,
which made no sense. These bugs have been corrected.
* tb/pseudo-merge-bitmap-fixes:
pseudo-merge.c: ensure pseudo-merge groups are closed
pseudo-merge.c: do not generate empty pseudo-merge commits
t/t5333-pseudo-merge-bitmaps.sh: demonstrate empty pseudo-merge groups
pack-bitmap-write.c: select pseudo-merges even for small bitmaps
pack-bitmap: drop redundant args from `bitmap_writer_finish()`
pack-bitmap: drop redundant args from `bitmap_writer_build()`
pack-bitmap: drop redundant args from `bitmap_writer_build_type_index()`
pack-bitmap: initialize `bitmap_writer_init()` with packing_data
A tests for "git maintenance" that were broken on Windows have been
corrected.
* ps/maintenance-detach-fix-more:
builtin/maintenance: fix loose objects task emitting pack hash
t7900: exercise detaching via trace2 regions
t7900: fix flaky test due to leaking background job
Maintenance tasks other than "gc" now properly go background when
"git maintenance" runs them.
* ps/maintenance-detach-fix:
run-command: fix detaching when running auto maintenance
builtin/maintenance: add a `--detach` flag
builtin/gc: add a `--detach` flag
builtin/gc: stop processing log file on signal
builtin/gc: fix leaking config values
builtin/gc: refactor to read config into structure
config: fix constness of out parameter for `git_config_get_expiry()`
"git rev-list ... | git diff-tree -p --remerge-diff --stdin" should
behave more or less like "git log -p --remerge-diff" but instead it
crashed, forgetting to prepare a temporary object store needed.
* xx/diff-tree-remerge-diff-fix:
diff-tree: fix crash when used with --remerge-diff
A flakey test and incorrect calls to strtoX() functions have been
fixed.
* kl/test-fixes:
t6421: fix test to work when repo dir contains d0
set errno=0 before strtoX calls
"git config --value=foo --fixed-value section.key newvalue" barfed
when the existing value in the configuration file used the
valueless true syntax, which has been corrected.
* tb/config-fixed-value-with-valueless-true:
config.c: avoid segfault with --fixed-value and valueless config
A recent update broke "git ls-remote" used outside a repository,
which has been corrected.
* ps/ls-remote-out-of-repo-fix:
builtin/ls-remote: fall back to SHA1 outside of a repo
The credential helper to talk to OSX keychain sometimes sent
garbage bytes after the username, which has been corrected.
* jk/osxkeychain-username-is-nul-terminated:
credential/osxkeychain: respect NUL terminator in username
The default object hash and ref backend format used to be settable
only with explicit command line option to "git init" and
environment variables, but now they can be configured in the user's
global and system wide configuration.
* ps/hash-and-ref-format-from-config:
setup: make ref storage format configurable via config
setup: make object format configurable via config
setup: merge configuration of repository formats
t0001: delete repositories when object format tests finish
t0001: exercise initialization with ref formats more thoroughly
* cp/unit-test-reftable-readwrite:
t-reftable-readwrite: add test for known error
t-reftable-readwrite: use 'for' in place of infinite 'while' loops
t-reftable-readwrite: use free_names() instead of a for loop
t: move reftable/readwrite_test.c to the unit testing framework
