The code to parse the From e-mail header has been updated to avoid
recursion.
* jk/mailinfo-iterative-unquote-comment:
mailinfo: avoid recursion when unquoting From headers
t5100: make rfc822 comment test more careful
Code clean-up for sanity checking of command line options for "git
show-ref".
* rs/show-ref-incompatible-options:
show-ref: use die_for_incompatible_opt3()
"git checkout -B <branch> [<start-point>]" allowed a branch that is
in use in another worktree to be updated and checked out, which
might be a bit unexpected. The rule has been tightened, which is a
breaking change. "--ignore-other-worktrees" option is required to
unbreak you, if you are used to the current behaviour that "-B"
overrides the safety.
* jc/checkout-B-branch-in-use:
checkout: forbid "-B <branch>" from touching a branch used elsewhere
checkout: refactor die_if_checked_out() caller
"git bisect reset" has been taught to clean up state files and refs
even when BISECT_START file is gone.
* jk/bisect-reset-fix:
bisect: always clean on reset
"git $cmd --end-of-options --rev -- --path" for some $cmd failed
to interpret "--rev" as a rev, and "--path" as a path. This was
fixed for many programs like "reset" and "checkout".
* jk/end-of-options:
parse-options: decouple "--end-of-options" and "--"
Clean-up code that handles combinations of incompatible options.
* rs/incompatible-options-messages:
worktree: simplify incompatibility message for --orphan and commit-ish
worktree: standardize incompatibility messages
clean: factorize incompatibility message
revision, rev-parse: factorize incompatibility messages about - -exclude-hidden
revision: use die_for_incompatible_opt3() for - -graph/--reverse/--walk-reflogs
repack: use die_for_incompatible_opt3() for -A/-k/--cruft
push: use die_for_incompatible_opt4() for - -delete/--tags/--all/--mirror
The command line parser for the "log" family of commands was too
loose when parsing certain numbers, e.g., silently ignoring the
extra 'q' in "git log -n 1q" without complaining, which has been
tightened up.
* jc/revision-parse-int:
revision: parse integer arguments to --max-count, --skip, etc., more carefully
Tests update.
* ps/ref-tests-update-more:
t6301: write invalid object ID via `test-tool ref-store`
t5551: stop writing packed-refs directly
t5401: speed up creation of many branches
t4013: simplify magic parsing and drop "failure"
t3310: stop checking for reference existence via `test -f`
t1417: make `reflog --updateref` tests backend agnostic
t1410: use test-tool to create empty reflog
t1401: stop treating FETCH_HEAD as real reference
t1400: split up generic reflog tests from the reffile-specific ones
t0410: mark tests to require the reffiles backend
Command line completion (in contrib/) learned to complete path
arguments to the "add/set" subcommands of "git sparse-checkout"
better.
* en/complete-sparse-checkout:
completion: avoid user confusion in non-cone mode
completion: avoid misleading completions in cone mode
completion: fix logic for determining whether cone mode is active
completion: squelch stray errors in sparse-checkout completion
trace2 streams used to record the URLs that potentially embed
authentication material, which has been corrected.
* jh/trace2-redact-auth:
t0212: test URL redacting in EVENT format
t0211: test URL redacting in PERF format
trace2: redact passwords from https:// URLs by default
trace2: fix signature of trace2_def_param() macro
"git merge-file" learned to take the "--diff-algorithm" option to
use algorithm different from the default "myers" diff.
* ad/merge-file-diff-algo:
merge-file: add --diff-algorithm option
Clean-up code that handles combinations of incompatible options.
* rs/i18n-cannot-be-used-together:
i18n: factorize even more 'incompatible options' messages
Stale URLs have been updated to their current counterparts (or
archive.org) and HTTP links are replaced with working HTTPS links.
* js/update-urls-in-doc-and-comment:
doc: refer to internet archive
doc: update links for andre-simon.de
doc: switch links to https
doc: update links to current pages
Earlier we stopped relying on commit-graph that (still) records
information about commits that are lost from the object store,
which has negative performance implications. The default has been
flipped to disable this pessimization.
* ps/commit-graph-less-paranoid:
commit-graph: disable GIT_COMMIT_GRAPH_PARANOIA by default
Introduce "git replay", a tool meant on the server side without
working tree to recreate a history.
* cc/git-replay:
replay: stop assuming replayed branches do not diverge
replay: add --contained to rebase contained branches
replay: add --advance or 'cherry-pick' mode
replay: use standard revision ranges
replay: make it a minimal server side command
replay: remove HEAD related sanity check
replay: remove progress and info output
replay: add an important FIXME comment about gpg signing
replay: change rev walking options
replay: introduce pick_regular_commit()
replay: die() instead of failing assert()
replay: start using parse_options API
replay: introduce new builtin
t6429: remove switching aspects of fast-rebase
Simplify API implementation to delete references by eliminating
duplication.
* ps/ref-deletion-updates:
refs: remove `delete_refs` callback from backends
refs: deduplicate code to delete references
refs/files: use transactions to delete references
t5510: ensure that the packed-refs file needs locking
The "check-chainlint" target runs automatically when running tests and
performs self-checks to verify that the chainlinter itself produces the
expected output. Originally, the chainlinter was implemented via sed,
but the infrastructure has been rewritten in fb41727b7e (t: retire
unused chainlint.sed, 2022-09-01) to use a Perl script instead.
The rewrite caused some slight whitespace changes in the output that are
ultimately not of much importance. In order to be able to assert that
the actual chainlinter errors match our expectations we thus have to
ignore whitespace characters when diffing them. As the `-w` flag is not
in POSIX we try to use `git diff -w --no-index` before we fall back to
`diff -w -u`.
To accomodate for cases where the host system has no Git installation we
use the locally-compiled version of Git. This can result in problems
though when the Git project's repository is using extensions that the
locally-compiled version of Git doesn't understand. It will refuse to
run and thus cause the checks to fail.
Instead of improving the detection logic, fix our ".expect" files so
that we do not need any post-processing at all anymore. This allows us
to drop the `-w` flag when diffing so that we can always use diff(1)
now.
Note that we keep some of the post-processing of `chainlint.pl` output
intact to strip leading line numbers generated by the script. Having
these would cause a rippling effect whenever we add a new test that
sorts into the middle of existing tests and would require us to
renumerate all subsequent lines, which seems rather pointless.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When processing "From" headers in an email, mailinfo "unquotes" quoted
strings and rfc822 parenthesized comments. For quoted strings, we
actually remove the double-quotes, so:
From: "A U Thor" <someone@example.com>
become:
Author: A U Thor
Email: someone@example.com
But for comments, we leave the outer parentheses in place, so:
From: A U (this is a comment) Thor <someone@example.com>
becomes:
Author: A U (this is a comment) Thor
Email: someone@example.com
So what is the comment "unquoting" actually doing? In our code, being in
a comment section has exactly two effects:
1. We'll unquote backslash-escaped characters inside a comment
section.
2. We _won't_ unquote double-quoted strings inside a comment section.
Our test for comments in t5100 checks this:
From: "A U Thor" <somebody@example.com> (this is \(really\) a comment (honestly))
So it is covering (1), but not (2). Let's add in a quoted string to
cover this.
Moreover, because the comment appears at the end of the From header,
there's nothing to confirm that we correctly found the end of the
comment section (and not just the end-of-string). Let's instead move it
to the beginning of the header, which means we can confirm that the
existing quoted string is detected (which will only happen if we know
we've left the comment block).
As expected, the test continues to pass, but this will give us more
confidence as we refactor the code in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -B <branch> [<start-point>]", being a "forced" version
of "-b", switches to the <branch>, after optionally resetting its
tip to the <start-point>, even if the <branch> is in use in another
worktree, which is somewhat unexpected.
Protect the <branch> using the same logic that forbids "git checkout
<branch>" from touching a branch that is in use elsewhere.
This is a breaking change that may deserve backward compatibliity
warning in the Release Notes. The "--ignore-other-worktrees" option
can be used as an escape hatch if the finger memory of existing
users depend on the current behaviour of "-B".
Reported-by: Willem Verstraeten <willem.verstraeten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When processing a header like a "From" line, mailinfo uses
unquote_quoted_pair() to handle double-quotes and rfc822 parenthesized
comments. It takes a NUL-terminated string on input, and loops over the
"in" pointer until it sees the NUL. When it finds the start of an
interesting block, it delegates to helper functions which also increment
"in", and return the updated pointer.
But there's a bug here: the helpers find the NUL with a post-increment
in the loop condition, like:
while ((c = *in++) != 0)
So when they do see a NUL (rather than the correct termination of the
quote or comment section), they return "in" as one _past_ the NUL
terminator. And thus the outer loop in unquote_quoted_pair() does not
realize we hit the NUL, and keeps reading past the end of the buffer.
We should instead make sure to return "in" positioned at the NUL, so
that the caller knows to stop their loop, too. A hacky way to do this is
to return "in - 1" after leaving the inner loop. But a slightly cleaner
solution is to avoid incrementing "in" until we are sure it contained a
non-NUL byte (i.e., doing it inside the loop body).
The two tests here show off the problem. Since we check the output,
they'll _usually_ report a failure in a normal build, but it depends on
what garbage bytes are found after the heap buffer. Building with
SANITIZE=address reliably notices the problem. The outcome (both the
exit code and the exact bytes) are just what Git happens to produce for
these cases today, and shouldn't be taken as an endorsement. It might be
reasonable to abort on an unterminated string, for example. The priority
for this patch is fixing the out-of-bounds memory access.
Reported-by: Carlos Andrés Ramírez Cataño <antaigroupltda@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard message for reporting the use of multiple mutually
exclusive options by calling die_for_incompatible_opt3() instead of
rolling our own. This has the benefits of showing only the actually
given options, reducing the number of strings to translate and making
the UI slightly more consistent.
Adjust the test to no longer insist on a specific order of the
reported options, as this implementation detail does not affect the
usefulness of the error message.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Newer versions of Getopt::Long started giving warnings against our
(ab)use of it in "git send-email". Bump the minimum version
requirement for Perl to 5.8.1 (from September 2002) to allow
simplifying our implementation.
* tz/send-email-negatable-options:
send-email: avoid duplicate specification warnings
perl: bump the required Perl version to 5.8.1 from 5.8.0
"git rebase --autosquash" is now enabled for non-interactive rebase,
but it is still incompatible with the apply backend.
* ak/rebase-autosquash:
rebase: rewrite --(no-)autosquash documentation
rebase: support --autosquash without -i
rebase: fully ignore rebase.autoSquash without -i
"git for-each-ref --no-sort" still sorted the refs alphabetically
which paid non-trivial cost. It has been redefined to show output
in an unspecified order, to allow certain optimizations to take
advantage of.
* vd/for-each-ref-unsorted-optimization:
t/perf: add perf tests for for-each-ref
ref-filter.c: use peeled tag for '*' format fields
for-each-ref: clean up documentation of --format
ref-filter.c: filter & format refs in the same callback
ref-filter.c: refactor to create common helper functions
ref-filter.c: rename 'ref_filter_handler()' to 'filter_one()'
ref-filter.h: add functions for filter/format & format-only
ref-filter.h: move contains caches into filter
ref-filter.h: add max_count and omit_empty to ref_format
ref-filter.c: really don't sort when using --no-sort
Test and shell scripts clean-up.
* ps/ban-a-or-o-operator-with-test:
Makefile: stop using `test -o` when unlinking duplicate executables
contrib/subtree: convert subtree type check to use case statement
contrib/subtree: stop using `-o` to test for number of args
global: convert trivial usages of `test <expr> -a/-o <expr>`
"git format-patch --encode-email-headers" ignored the option when
preparing the cover letter, which has been corrected.
* ss/format-patch-use-encode-headers-for-cover-letter:
format-patch: fix ignored encode_email_headers for cover letter
Update ref-related tests.
* ps/ref-tests-update:
t: mark several tests that assume the files backend with REFFILES
t7900: assert the absence of refs via git-for-each-ref(1)
t7300: assert exact states of repo
t4207: delete replace references via git-update-ref(1)
t1450: convert tests to remove worktrees via git-worktree(1)
t: convert tests to not access reflog via the filesystem
t: convert tests to not access symrefs via the filesystem
t: convert tests to not write references via the filesystem
t: allow skipping expected object ID in `ref-store update-ref`
"git add" and "git stash" learned to support the ":(attr:...)"
magic pathspec.
* jw/git-add-attr-pathspec:
attr: enable attr pathspec magic for git-add and git-stash
Code clean-up for jk/chunk-bounds topic.
* jk/chunk-bounds-more:
commit-graph: mark chunk error messages for translation
commit-graph: drop verify_commit_graph_lite()
commit-graph: check order while reading fanout chunk
commit-graph: use fanout value for graph size
commit-graph: abort as soon as we see a bogus chunk
commit-graph: clarify missing-chunk error messages
commit-graph: drop redundant call to "lite" verification
midx: check consistency of fanout table
commit-graph: handle overflow in chunk_size checks
Add support for GitLab CI.
* ps/ci-gitlab:
ci: add support for GitLab CI
ci: install test dependencies for linux-musl
ci: squelch warnings when testing with unusable Git repo
ci: unify setup of some environment variables
ci: split out logic to set up failed test artifacts
ci: group installation of Docker dependencies
ci: make grouping setup more generic
ci: reorder definitions for grouping functions
Update the base topic to work with CMake builds.
* js/doc-unit-tests-with-cmake:
cmake: handle also unit tests
cmake: use test names instead of full paths
cmake: fix typo in variable name
artifacts-tar: when including `.dll` files, don't forget the unit-tests
unit-tests: do show relative file paths
unit-tests: do not mistake `.pdb` files for being executable
cmake: also build unit tests
Process to add some form of low-level unit tests has started.
* js/doc-unit-tests:
ci: run unit tests in CI
unit tests: add TAP unit test framework
unit tests: add a project plan document
The "rev-list" and other commands in the "log" family, being the
oldest part of the system, use their own custom argument parsers,
and integer values of some options are parsed with atoi(), which
allows a non-digit after the number (e.g., "1q") to be silently
ignored. As a natural consequence, an argument that does not begin
with a digit (e.g., "q") silently becomes zero, too.
Switch to use strtol_i() and parse_timestamp() appropriately to
catch bogus input.
Note that one may naïvely expect that --max-count, --skip, etc., to
only take non-negative values, but we must allow them to also take
negative values, as an escape hatch to countermand a limit set by an
earlier option on the command line; the underlying variables are
initialized to (-1) and "--max-count=-1", for example, is a
legitimate way to reinitialize the limit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually "bisect reset" cleans up any refs/bisect/ refs, along with
meta-files like .git/BISECT_LOG. But it only does so after deciding that
a bisection is active, which it does by reading BISECT_START. This is
usually fine, but it's possible to get into a confusing state if the
BISECT_START file is gone, but other cruft is left (this might be due to
a bug, or a system crash, etc).
And since "bisect reset" refuses to do anything in this state, the user
has no easy way to clean up the leftover cruft. While another "bisect
start" would clear the state, in the interim it can be annoying, as
other tools (like our bash prompt code) think we are bisecting, and
for-each-ref output may be polluted with refs/bisect/ entries.
Further adding to the confusion is that running "bisect reset $some_ref"
skips the BISECT_START check. So it never realizes that there's no
bisection active and does the cleanup anyway!
So let's just make sure we always do the cleanup, whether we looked at
BISECT_START or not. If the user doesn't give us a commit to reset to,
we'll still say "We are not bisecting" and skip the call to "git
checkout".
Reported-by: Janik Haag <janik@aq0.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we added generic end-of-options support in 51b4594b40
(parse-options: allow --end-of-options as a synonym for "--",
2019-08-06), we made them true synonyms. They both stop option parsing,
and they are both returned in the resulting argv if the KEEP_DASHDASH
flag is used.
The hope was that this would work for all callers:
- most generic callers would not pass KEEP_DASHDASH, and so would just
do the right thing (stop parsing there) without needing to know
anything more.
- callers with KEEP_DASHDASH were generally going to rely on
setup_revisions(), which knew to handle --end-of-options specially
But that turned out miss quite a few cases that pass KEEP_DASHDASH but
do their own manual parsing. For example, "git reset", "git checkout",
and so on want pass KEEP_DASHDASH so they can support:
git reset $revs -- $paths
but of course aren't going to actually do a traversal, so they don't
call setup_revisions(). And those cases currently get confused by
--end-of-options being left in place, like:
$ git reset --end-of-options HEAD
fatal: option '--end-of-options' must come before non-option arguments
We could teach each of these callers to handle the leftover option
explicitly. But let's try to be a bit more clever and see if we can
solve it centrally in parse-options.c.
The bogus assumption here is that KEEP_DASHDASH tells us the caller
wants to see --end-of-options in the result. But really, the callers
which need to know that --end-of-options was reached are those that may
potentially parse more options from argv. In other words, those that
pass the KEEP_UNKNOWN_OPT flag.
If such a caller is aware of --end-of-options (e.g., because they call
setup_revisions() with the result), then this will continue to do the
right thing, treating anything after --end-of-options as a non-option.
And if the caller is not aware of --end-of-options, they are better off
keeping it intact, because either:
1. They are just passing the options along to somebody else anyway, in
which case that somebody would need to know about the
--end-of-options marker.
2. They are going to parse the remainder themselves, at which point
choking on --end-of-options is much better than having it silently
removed. The point is to avoid option injection from untrusted
command line arguments, and bailing is better than quietly treating
the untrusted argument as an option.
This fixes bugs with --end-of-options across several commands, but I've
focused on two in particular here:
- t7102 confirms that "git reset --end-of-options --foo" now works.
This checks two things. One, that we no longer barf on
"--end-of-options" itself (which previously we did, even if the rev
was something vanilla like "HEAD" instead of "--foo"). And two, that
we correctly treat "--foo" as a revision rather than an option.
This fix applies to any other cases which pass KEEP_DASHDASH but not
KEEP_UNKNOWN_OPT, like "git checkout", "git check-attr", "git grep",
etc, which would previously choke on "--end-of-options".
- t9350 shows the opposite case: fast-export passed KEEP_UNKNOWN_OPT
but not KEEP_DASHDASH, but then passed the result on to
setup_revisions(). So it never saw --end-of-options, and would
erroneously parse "fast-export --end-of-options --foo" as having a
"--foo" option. This is now fixed.
Note that this does shut the door for callers which want to know if we
hit end-of-options, but don't otherwise need to keep unknown opts. The
obvious thing here is feeding it to the DWIM verify_filename()
machinery. And indeed, this is a problem even for commands which do
understand --end-of-options already. For example, without this patch,
you get:
$ git log --end-of-options --foo
fatal: option '--foo' must come before non-option arguments
because we refuse to accept "--foo" as a filename (because it starts
with a dash) even though we could know that we saw end-of-options. The
verify_filename() function simply doesn't accept this extra information.
So that is the status quo, and this patch doubles down further on that.
Commands like "git reset" have the same problem, but they won't even
know that parse-options saw --end-of-options! So even if we fixed
verify_filename(), they wouldn't have anything to pass to it.
But in practice I don't think this is a big deal. If you are being
careful enough to use --end-of-options, then you should also be using
"--" to disambiguate and avoid the DWIM behavior in the first place. In
other words, doing:
git log --end-of-options --this-is-a-rev -- --this-is-a-path
works correctly, and will continue to do so. And likewise, with this
patch now:
git reset --end-of-options --this-is-a-rev -- --this-is-a-path
will work, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard parameterized message for reporting incompatible
options for worktree add. This reduces the number of strings to
translate and makes the UI slightly more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard parameterized message for reporting incompatible
options to report options that are not accepted in combination with
--exclude-hidden. This reduces the number of strings to translate and
makes the UI a bit more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is tempting to think of "files and directories" of the current
directory as valid inputs to the add and set subcommands of git
sparse-checkout. However, in non-cone mode, they often aren't and using
them as potential completions leads to *many* forms of confusion:
Issue #1. It provides the *wrong* files and directories.
For
git sparse-checkout add
we always want to add files and directories not currently in our sparse
checkout, which means we want file and directories not currently present
in the current working tree. Providing the files and directories
currently present is thus always wrong.
For
git sparse-checkout set
we have a similar problem except in the subset of cases where we are
trying to narrow our checkout to a strict subset of what we already
have. That is not a very common scenario, especially since it often
does not even happen to be true for the first use of the command; for
years we required users to create a sparse-checkout via
git sparse-checkout init
git sparse-checkout set <args...>
(or use a clone option that did the init step for you at clone time).
The init command creates a minimal sparse-checkout with just the
top-level directory present, meaning the set command has to be used to
expand the checkout. Thus, only in a special and perhaps unusual cases
would any of the suggestions from normal file and directory completion
be appropriate.
Issue #2: Suggesting patterns that lead to warnings is unfriendly.
If the user specifies any regular file and omits the leading '/', then
the sparse-checkout command will warn the user that their command is
problematic and suggest they use a leading slash instead.
Issue #3: Completion gets confused by leading '/', and provides wrong paths.
Users often want to anchor their patterns to the toplevel of the
repository, especially when listing individual files. There are a
number of reasons for this, but notably even sparse-checkout encourages
them to do so (as noted above). However, if users do so (via adding a
leading '/' to their pattern), then bash completion will interpret the
leading slash not as a request for a path at the toplevel of the
repository, but as a request for a path at the root of the filesytem.
That means at best that completion cannot help with such paths, and if
it does find any completions, they are almost guaranteed to be wrong.
Issue #4: Suggesting invalid patterns from subdirectories is unfriendly.
There is no per-directory equivalent to .gitignore with
sparse-checkouts. There is only a single worktree-global
$GIT_DIR/info/sparse-checkout file. As such, paths to files must be
specified relative to the toplevel of a repository. Providing
suggestions of paths that are relative to the current working directory,
as bash completion defaults to, is wrong when the current working
directory is not the worktree toplevel directory.
Issue #5: Paths with special characters will be interpreted incorrectly
The entries in the sparse-checkout file are patterns, not paths. While
most paths also qualify as patterns (though even in such cases it would
be better for users to not use them directly but prefix them with a
leading '/'), there are a variety of special characters that would need
special escaping beyond the normal shell escaping: '*', '?', '\', '[',
']', and any leading '#' or '!'. If completion suggests any such paths,
users will likely expect them to be treated as an exact path rather than
as a pattern that might match some number of files other than 1.
However, despite the first four issues, we can note that _if_ users are
using tab completion, then they are probably trying to specify a path in
the index. As such, we transform their argument into a top-level-rooted
pattern that matches such a file. For example, if they type:
git sparse-checkout add Make<TAB>
we could "complete" to
git sparse-checkout add /Makefile
or, if they ran from the Documentation/technical/ subdirectory:
git sparse-checkout add m<TAB>
we could "complete" it to:
git sparse-checkout add /Documentation/technical/multi-pack-index.txt
Note in both cases I use "complete" in quotes, because we actually add
characters both before and after the argument in question, so we are
kind of abusing "bash completions" to be "bash completions AND
beginnings".
The fifth issue is a bit stickier, especially when you consider that we
not only need to deal with escaping issues because of special meanings
of patterns in sparse-checkout & gitignore files, but also that we need
to consider escaping issues due to ls-files needing to sometimes quote
or escape characters, and because the shell needs to escape some
characters. The multiple interacting forms of escaping could get ugly;
this patch makes no attempt to do so and simply documents that we
decided to not deal with those corner cases for now but at least get the
common cases right.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t6301 verifies that the reference backend correctly
warns about the case where a reference points to a non-existent object.
This is done by writing the object ID into the loose reference directly,
which is quite intimate with how the files backend works.
Refactor the code to instead use `test-tool ref-store` to write the
reference, which is backend-agnostic.
There are two more tests in this file which write loose files directly,
as well. But both of them are indeed quite specific to the loose files
backend and cannot be easily ported to other backends. We thus mark them
as requiring the REFFILES prerequisite.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have multiple tests in t5551 that write thousands of tags. To do so
efficiently we generate the tags by writing the `packed-refs` file
directly, which of course assumes that the reference database is backed
by the files backend.
Refactor the code to instead use a single `git update-ref --stdin`
command to write the tags. While the on-disk end result is not the same
as we now have a bunch of loose refs instead of a single packed-refs
file, the distinction shouldn't really matter for any of the tests that
use this helper.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t5401 creates a bunch of branches by calling
git-branch(1) for every one of them. This is quite inefficient and takes
a comparatively long time even on Unix systems where spawning processes
is comparatively fast. Refactor it to instead use git-update-ref(1),
which leads to an almost 10-fold speedup:
```
Benchmark 1: ./t5401-update-hooks.sh (rev = HEAD)
Time (mean ± σ): 983.2 ms ± 97.6 ms [User: 328.8 ms, System: 679.2 ms]
Range (min … max): 882.9 ms … 1078.0 ms 3 runs
Benchmark 2: ./t5401-update-hooks.sh (rev = HEAD~)
Time (mean ± σ): 9.312 s ± 0.398 s [User: 2.766 s, System: 6.617 s]
Range (min … max): 8.885 s … 9.674 s 3 runs
Summary
./t5401-update-hooks.sh (rev = HEAD) ran
9.47 ± 1.02 times faster than ./t5401-update-hooks.sh (rev = HEAD~)
```
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t14013, we have various different tests that verify whether certain
diffs are generated as expected. As much of the logic is the same across
many of the tests we some common code in there that generates the actual
test cases for us.
As some diffs are more special than others depending on the command line
parameters passed to git-diff(1), these tests need to adapt behaviour to
the specific test case sometimes. This is done via colon-prefixed magic
commands, of which we currently know "failure" and "noellipses". The
logic to parse this magic is a bit convoluted though and hard to grasp,
also due to the rather unnecessary nesting.
Un-nest the cases so that it becomes a bit more straightfoward. The
logic is further simplified by removing support for the "failure" magic,
which is not actually used anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t3310 exercises whether the special references
`NOTES_MERGE_PARTIAL` and `NOTES_MERGE_REF` exist as expected when the
notes subsystem runs into a merge conflict. This is done by checking
on-disk data structures directly though instead of asking the reference
backend.
Refactor the test to use git-rev-parse(1) instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for `git reflog delete --updateref` are currently marked to
only run with the reffiles backend. There is no inherent reason that
this should be the case other than the fact that the setup messes with
the on-disk reflogs directly.
Refactor the test to stop doing so and drop the REFFILES prerequisite.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t1410 is marked to be specific to the files
reference backend, which is because we create a reflog manually by
creating the respective file. Refactor the test to instead use our
`test-tool ref-store` helper to create the reflog so that it works with
other reference backends, as well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t1401 asserts that we can create a symref from a
symbolic reference to a top-level reference, which is done by linking
from `refs/heads/top-level` to `FETCH_HEAD`. But `FETCH_HEAD` is not a
proper reference and doesn't even follow the loose reference format, so
it is not a good candidate for the logic under test.
Refactor the test to use `ORIG_HEAD` instead of `FETCH_HEAD`. This also
works with other backends than the reffiles one.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a bunch of tests in t1400 that check whether we correctly read
reflog entries. These tests create the reflog by manually writing to the
respective loose file, which makes them specific to the files backend.
But while some of them do indeed exercise very specific edge cases in
the reffiles backend, most of the tests exercise generic functionality
that should be common to all backends.
Unfortunately, we can't easily adapt all of the tests to work with all
backends. Instead, split out the reffile-specific tests from the ones
that should work with all backends and refactor the generic ones to not
write to the on-disk files directly anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
