When invoking git-config(1) with a wrong set of arguments we end up
calling `usage_builtin_config()` after printing an error message that
says what was wrong. As that function ends up printing the full list of
options, which is quite long, the actual error message will be buried by
a wall of text. This makes it really hard to figure out what exactly
caused the error.
Furthermore, now that we have recently introduced subcommands, the usage
information may actually be misleading as we unconditionally print
options of the subcommand-less mode.
Fix both of these issues by just not printing the options at all
anymore. Instead, we call `usage()` that makes us report in a single
line what has gone wrong. This should be way more discoverable for our
users and addresses the inconsistency.
Furthermore, this change allow us to inline the options into the
respective functions that use them to parse the command line.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The color parsing code learned to handle 12-bit RGB colors, spelled
as "#RGB" (in addition to "#RRGGBB" that is already supported).
* bb/rgb-12-bit-colors:
color: add support for 12-bit RGB colors
t/t4026-color: add test coverage for invalid RGB colors
t/t4026-color: remove an extra double quote character
zsh can pretend to be a normal shell pretty well except for some
glitches that we tickle in some of our scripts. Work them around
so that "vimdiff" and our test suite works well enough with it.
* bc/zsh-compatibility:
vimdiff: make script and tests work with zsh
t4046: avoid continue in &&-chain for zsh
When the user responds to a prompt given by "git add -p" with an
unsupported command, list of available commands were given, which
was too much if the user knew what they wanted to type but merely
made a typo. Now the user gets a much shorter error message.
* rj/add-p-typo-reaction:
add-patch: response to unknown command
add-patch: do not show UI messages on stderr
Command line completion script (in contrib/) learned to complete
"git symbolic-ref" a bit better (you need to enable plumbing
commands to be completed with GIT_COMPLETION_SHOW_ALL_COMMANDS).
* rh/complete-symbolic-ref:
completion: add docs on how to add subcommand completions
completion: improve docs for using __git_complete
completion: add 'symbolic-ref'
The singleton index_state instance "the_index" has been eliminated
by always instantiating "the_repository" and replacing references
to "the_index" with references to its .index member.
* ps/the-index-is-no-more:
repository: drop `initialize_the_repository()`
repository: drop `the_index` variable
builtin/clone: stop using `the_index`
repository: initialize index in `repo_init()`
builtin: stop using `the_index`
t/helper: stop using `the_index`
The credential helper protocol, together with the HTTP layer, have
been enhanced to support authentication schemes different from
username & password pair, like Bearer and NTLM.
* bc/credential-scheme-enhancement:
credential: add method for querying capabilities
credential-cache: implement authtype capability
t: add credential tests for authtype
credential: add support for multistage credential rounds
t5563: refactor for multi-stage authentication
docs: set a limit on credential line length
credential: enable state capability
credential: add an argument to keep state
http: add support for authtype and credential
docs: indicate new credential protocol fields
credential: add a field called "ephemeral"
credential: gate new fields on capability
credential: add a field for pre-encoded credentials
http: use new headers for each object request
remote-curl: reset headers on new request
credential: add an authtype field
Tests to ensure interoperability between reftable written by jgit
and our code have been added and enabled in CI.
* ps/ci-test-with-jgit:
t0612: add tests to exercise Git/JGit reftable compatibility
t0610: fix non-portable variable assignment
t06xx: always execute backend-specific tests
ci: install JGit dependency
ci: make Perforce binaries executable for all users
ci: merge scripts which install dependencies
ci: fix setup of custom path for GitLab CI
ci: merge custom PATH directories
ci: convert "install-dependencies.sh" to use "/bin/sh"
ci: drop duplicate package installation for "linux-gcc-default"
ci: skip sudo when we are already root
ci: expose distro name in dockerized GitHub jobs
ci: rename "runs_on_pool" to "distro"
Code to write out reftable has seen some optimization and
simplification.
* ps/reftable-write-optim:
reftable/block: reuse compressed array
reftable/block: reuse zstream when writing log blocks
reftable/writer: reset `last_key` instead of releasing it
reftable/writer: unify releasing memory
reftable/writer: refactorings for `writer_flush_nonempty_block()`
reftable/writer: refactorings for `writer_add_record()`
refs/reftable: don't recompute committer ident
reftable: remove name checks
refs/reftable: skip duplicate name checks
refs/reftable: perform explicit D/F check when writing symrefs
refs/reftable: fix D/F conflict error message on ref copy
Until now, `git config -h` would have printed help for the old-style
syntax. Now that all modes have proper subcommands though it is
preferable to instead display the subcommand help.
Drop the `NO_INTERNAL_HELP` flag to do so. While at it, drop the help
mismatch in t0450 and add the `--get-colorbool` option to the usage such
that git-config(1)'s synopsis and `git config -h` match.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "edit" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "remove-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "rename-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "unset" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "set" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "get" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git-config(1) has several modes, those modes are not exposed with
subcommands but instead by specifying action flags like `--unset` or
`--list`. This user interface is not really in line with how our more
modern commands work, where it is a lot more customary to say e.g. `git
remote list`. Furthermore, to add to the confusion, git-config(1) also
allows the user to request modes implicitly by just specifying the
correct number of arguments. Thus, `git config foo.bar` will retrieve
the value of "foo.bar" while `git config foo.bar baz` will set it to
"baz".
Overall, this makes for a confusing interface that could really use a
makeover. It hurts discoverability of what you can do with git-config(1)
and is comparatively easy to get wrong. Converting the command to have
subcommands instead would go a long way to help address these issues.
One concern in this context is backwards compatibility. Luckily, we can
introduce subcommands without breaking backwards compatibility at all.
This is because all the implicit modes of git-config(1) require that the
first argument is a properly formatted config key. And as config keys
_must_ have a dot in their name, any value without a dot would have been
discarded by git-config(1) previous to this change. Thus, given that
none of the subcommands do have a dot, they are unambiguous.
Introduce the first such new subcommand, which is "git config list". To
retain backwards compatibility we only conditionally use subcommands and
will fall back to the old syntax in case no subcommand was detected.
This should help to transition to the new-style syntax until we
eventually deprecate and remove the old-style syntax.
Note that the way we handle this we're duplicating some functionality
across old and new syntax. While this isn't pretty, it helps us to
ensure that there really is no change in behaviour for the old syntax.
Amend tests such that we run them both with old and new style syntax.
As tests are now run twice, state from the first run may be still be
around in the second run and thus cause tests to fail. Add cleanup logic
as required to fix such tests.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-config(1) command has various different modes which are
accessible via e.g. `--get-urlmatch` or `--unset-all`. These modes are
declared with `OPT_BIT()`, which causes two minor issues:
- The respective modes also have a negated form `--no-get-urlmatch`,
which is unintended.
- We have to manually handle exclusiveness of the modes.
Switch these options to instead use `OPT_CMDMODE()`, which is made
exactly for this usecase. Remove the now-unneeded check that only a
single mode is given, which is now handled by the parse-options
interface.
While at it, format optional placeholders for arguments to conform to
our style guidelines by using `[<placeholder>]`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RGB color parsing currently supports 24-bit values in the form #RRGGBB.
As in Cascading Style Sheets (CSS [1]), also allow to specify an RGB color
using only three digits with #RGB.
In this shortened form, each of the digits is – again, as in CSS –
duplicated to convert the color to 24 bits, e.g. #f1b specifies the same
color as #ff11bb.
In color.h, remove the '0x' prefix in the example to match the actual
syntax.
[1] https://developer.mozilla.org/en-US/docs/Web/CSS/hex-color
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that the RGB color parser rejects invalid characters and
invalid lengths.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is most probably just an editing left-over from cb357221a4 (t4026:
test "normal" color, 2014-11-20) which added this test.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A scheduled "git maintenance" job is expected to work on all
repositories it knows about, but it stopped at the first one that
errored out. Now it keeps going.
* js/for-each-repo-keep-going:
maintenance: running maintenance should not stop on errors
for-each-repo: optionally keep going on an error
The "--rfc" option of "git format-patch" learned to take an
optional string value to be used in place of "RFC" to tweak the
"[PATCH]" on the subject header.
* jc/format-patch-rfc-more:
format-patch: "--rfc=-(WIP)" appends to produce [PATCH (WIP)]
format-patch: allow --rfc to optionally take a value, like --rfc=WIP
The "-k" and "--rfc" options of "format-patch" will now error out
when used together, as one tells us not to add anything to the
title of the commit, and the other one tells us to add "RFC" in
addition to "PATCH".
* ds/format-patch-rfc-and-k:
format-patch: ensure that --rfc and -k are mutually exclusive
The procedure to build multi-pack-index got confused by the
replace-refs mechanism, which has been corrected by disabling the
latter.
* xx/disable-replace-when-building-midx:
midx: disable replace objects
"git rebase --signoff" used to forget that it needs to add a
sign-off to the resulting commit when told to continue after a
conflict stops its operation.
* pw/rebase-m-signoff-fix:
rebase -m: fix --signoff with conflicts
sequencer: store commit message in private context
sequencer: move current fixups to private context
sequencer: start removing private fields from public API
sequencer: always free "struct replay_opts"
When the user gives an unknown command to the "add -p" prompt, the list
of accepted commands with their explanation is given. This is the same
output they get when they say '?'.
However, the unknown command may be due to a user input error rather
than the user not knowing the valid command.
To reduce the likelihood of user confusion and error repetition, instead
of displaying the list of accepted commands, display a short error
message with the unknown command received, as feedback to the user.
Include a reminder about the current command '?' in the new message, to
guide the user if they want help.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to show some UI messages on stderr, and yet doing so
may produce some undesirable results, such as messages appearing in an
unexpected order.
Let's use stdout for all UI messages, and adjusts the tests accordingly.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh has a bug in which the keyword "continue" within an &&-chain is not
effective and the code following it is executed nonetheless.
Fortunately, this bug has been fixed upstream in 12e5db145 ("51608:
Don't execute commands after "continue &&"", 2023-03-29). However, zsh
releases very infrequently, so it is not present in a stable release
yet.
That, combined with the fact that almost all zsh users get their shell
from their OS vendor, means that it will likely be a long time before
this problem is fixed for most users. We have other workarounds in
place for FreeBSD ash and dash, so it shouldn't be too difficult to add
one here, either.
Replace the existing code with a test and if-block, which comes only at
the cost of an additional indentation, and leaves the code a little more
idiomatic anyway.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leakfix.
* rj/add-i-leak-fix:
add: plug a leak on interactive_add
add-patch: plug a leak handling the '/' command
add-interactive: plug a leak in get_untracked_files
apply: plug a leak in apply_data
Even 'symbolic-ref' is only completed when
GIT_COMPLETION_SHOW_ALL_COMMANDS=1 is set, it currently defaults to
completing file names, which is not very helpful. Add a simple
completion function which completes options and refs.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/microsoft/git/issues/623, it was reported that
maintenance stops on a missing repository, omitting the remaining
repositories that were scheduled for maintenance.
This is undesirable, as it should be a best effort type of operation.
It should still fail due to the missing repository, of course, but not
leave the non-missing repositories in unmaintained shapes.
Let's use `for-each-repo`'s shiny new `--keep-going` option that we just
introduced for that very purpose.
This change will be picked up when running `git maintenance start`,
which is run implicitly by `scalar reconfigure`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/microsoft/git/issues/623, it was reported that
the regularly scheduled maintenance stops if one repo in the middle of
the list was found to be missing.
This is undesirable, and points out a gap in the design of `git
for-each-repo`: We need a mode where that command does not stop on an
error, but continues to try running the specified command with the other
repositories.
Imitating the `--keep-going` option of GNU make, this commit teaches
`for-each-repo` the same trick: to continue with the operation on all
the remaining repositories in case there was a problem with one
repository, still setting the exit code to indicate an error occurred.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When .git/rr-cache/ rerere database gets corrupted or rerere is fed to
work on a file with conflicted hunks resolved incompletely, the rerere
machinery got confused and segfaulted, which has been corrected.
* mr/rerere-crash-fix:
rerere: fix crashes due to unmatched opening conflict markers
GIt 2.44 introduced a regression that makes the updated code to
barf in repositories with multi-pack index written by older
versions of Git, which has been corrected.
* ps/missing-btmp-fix:
pack-bitmap: gracefully handle missing BTMP chunks
The cvsimport tests required that the platform understands
traditional timezone notations like CST6CDT, which has been
updated to work on those systems as long as they understand
POSIX notation with explicit tz transition dates.
* dd/t9604-use-posix-timezones:
t9604: Fix test for musl libc and new Debian
The way "git fast-import" handles paths described in its input has
been tightened up and more clearly documented.
* ta/fast-import-parse-path-fix:
fast-import: make comments more precise
fast-import: forbid escaped NUL in paths
fast-import: document C-style escapes for paths
fast-import: improve documentation for path quoting
fast-import: remove dead strbuf
fast-import: allow unquoted empty path for root
fast-import: directly use strbufs for paths
fast-import: tighten path unquoting
In the previous step, the "--rfc" option of "format-patch" learned
to take an optional string value to prepend to the subject prefix,
so that --rfc=WIP can give "[WIP PATCH]".
There may be cases in which the extra string wants to come after the
subject prefix. Extend the mechanism to allow "--rfc=-(WIP)" [*] to
signal that the extra string is to be appended instead of getting
prepended, resulting in "[PATCH (WIP)]".
In the documentation, discourage (ab)using "--rfc=-RFC" to say
"[PATCH RFC]" just to be different, when "[RFC PATCH]" is the norm.
[Footnote]
* The syntax takes inspiration from Perl's open syntax that opens
pipes "open fh, '|-', 'cmd'", where the dash signals "the other
stuff comes here".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the "--rfc" option, we can tweak the "[PATCH]" (or whatever
string specified with the "--subject-prefix" option, instead of
"PATCH") that we prefix the title of the commit with into "[RFC
PATCH]", but some projects may want "[rfc PATCH]". Adding a new
option, e.g., "--rfc-lowercase", to support such need every time
somebody wants to use different strings would lead to insanity of
accumulating unbounded number of such options.
Allow an optional value specified for the option, so that users can
use "--rfc=rfc" (think of "--rfc" without value as a short-hand for
"--rfc=RFC") if they wanted to.
This can of course be (ab)used to make the prefix "[WIP PATCH]" by
passing "--rfc=WIP". Passing an empty string, i.e., "--rfc=", is
the same as "--no-rfc" to override an option given earlier on the
same command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a leak we have since 5a76aff1a6 (add: convert to use
parse_pathspec, 2013-07-14).
This leak can be triggered with:
$ git add -p anything
Fixing this leak allows us to mark as leak-free the following tests:
+ t3701-add-interactive.sh
+ t7514-commit-patch.sh
Mark them with "TEST_PASSES_SANITIZE_LEAK=true" to notice and fix
promply any new leak that may be introduced and triggered by them in the
future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have an execution path in apply_data that leaks the local struct
image. Plug it.
This leak can be triggered with:
$ echo foo >file
$ git add file && git commit -m file
$ echo bar >file
$ git diff file >diff
$ sed s/foo/frotz/ <diff >baddiff
$ git apply --cached <baddiff
Fixing this leak allows us to mark as leak-free the following tests:
+ t2016-checkout-patch.sh
+ t4103-apply-binary.sh
+ t4104-apply-boundary.sh
+ t4113-apply-ending.sh
+ t4117-apply-reject.sh
+ t4123-apply-shrink.sh
+ t4252-am-options.sh
+ t4258-am-quoted-cr.sh
Mark them with "TEST_PASSES_SANITIZE_LEAK=true" to notice and fix
promply any new leak that may be introduced and triggered by them in the
future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash --staged" errors out when given binary files, after saving the
stash.
This behaviour dates back to the addition of the feature in 41a28eb6c1
(stash: implement '--staged' option for 'push' and 'save', 2021-10-18).
Adding the "--binary" option of "diff-tree" fixes this. The "diff-tree" call
in stash_patch() also omits "--binary", but that is fine since binary files
cannot be selected interactively.
Helped-By: Jeff King <peff@peff.net>
Helped-By: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug that allows the "--rfc" and "-k" options to be specified together
when "git format-patch" is executed, which was introduced in the commit
e0d7db7423 ("format-patch: --rfc honors what --subject-prefix sets").
Add a couple of additional tests to t4014, to cover additional cases of
the mutual exclusivity between different "git format-patch" options.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing with "--signoff" the commit created by "rebase --continue"
after resolving conflicts or editing a commit fails to add the
"Signed-off-by:" trailer. This happens because the message from the
original commit is reused instead of the one that would have been used
if the sequencer had not stopped for the user interaction. The correct
message is stored in ctx->message and so with a couple of exceptions
this is written to rebase_path_message() when stopping for user
interaction instead. The exceptions are (i) "fixup" and "squash"
commands where the file is written by error_failed_squash() and (ii)
"edit" commands that are fast-forwarded where the original message is
still reused. The latter is safe because "--signoff" will never
fast-forward.
Note this introduces a change in behavior as the message file now
contains conflict comments. This is safe because commit_staged_changes()
passes an explicit cleanup flag when not editing the message and when
the message is being edited it will be cleaned up automatically. This
means user now sees the same message comments in editor with "rebase
--continue" as they would if they ran "git commit" themselves before
continuing the rebase. It also matches the behavior of "git
cherry-pick", "git merge" etc. which all list the files with merge
conflicts.
The tests are extended to check that all commits made after continuing a
rebase have a "Signed-off-by:" trailer. Sadly there are a couple of
leaks in apply.c which I've not been able to track down that mean this
test file is no-longer leak free when testing "git rebase --apply
--signoff" with conflicts.
Reported-by: David Bimmler <david.bimmler@isovalent.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have dropped `the_index`, `initialize_the_repository()`
doesn't really do a lot anymore except for setting up the pointer for
`the_repository` and then calling `initialize_repository()`. The former
can be replaced by statically initializing the pointer though, which
basically makes this function moot.
Convert callers to instead call `initialize_repository(the_repository)`
and drop `initialize_thee_repository()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert test-helper tools to use `the_repository->index` instead of
`the_index`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We observed a series of clone failures arose in a specific set of
repositories after we fully enabled the MIDX bitmap feature within our
Codebase service. These failures were accompanied with error messages
such as:
Cloning into bare repository 'clone.git'...
remote: Enumerating objects: 8, done.
remote: Total 8 (delta 0), reused 0 (delta 0), pack-reused 8 (from 1)
Receiving objects: 100% (8/8), done.
fatal: did not receive expected object ...
fatal: fetch-pack: invalid index-pack output
Temporarily disabling the MIDX feature eliminated the reported issues.
After some investigation we found that all repositories experiencing
failures contain replace references, which seem to be improperly
acknowledged by the MIDX bitmap generation logic.
A more thorough explanation about the root cause from Taylor Blau says:
Indeed, the pack-bitmap-write machinery does not itself call
disable_replace_refs(). So when it generates a reachability bitmap, it
is doing so with the replace refs in mind. You can see that this is
indeed the cause of the problem by looking at the output of an
instrumented version of Git that indicates what bits are being set
during the bitmap generation phase.
With replace refs (incorrectly) enabled, we get:
[2, 4, 6, 8, 13, 3, 6, 7, 3, 4, 6, 8]
and doing the same after calling disable_replace_refs(), we instead get:
[2, 5, 6, 13, 3, 6, 7, 3, 4, 6, 8]
Single pack bitmaps are unaffected by this issue because we generate
them from within pack-objects, which does call disable_replace_refs().
This patch updates the MIDX logic to disable replace objects within the
multi-pack-index builtin, and a test showing a clone (which would fail
with MIDX bitmap) is added to demonstrate the bug.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
