There's nothing inherently transport-related about enumerating the
alternate ref tips. The code has lived in transport.[ch] because the
only use so far had been advertising available tips during transport.
But it could be used for more, and a future patch will teach rev-list to
access these refs.
Let's move it alongside the other alt-odb code, declaring it in
object-store.h with the implementation in sha1-file.c.
This lets us drop the inclusion of transport.h from receive-pack, which
perhaps shows how it was misplaced (though receive-pack is about
transporting objects, transport.h is mostly about the client side).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `exec` command is specific to the interactive backend, therefore it
does not make sense for non-interactive rebases to heed that config
setting.
We still want to error out if a non-interactive rebase is started with
`--reschedule-failed-exec`, of course.
Reported by Vas Sudanagunta via:
https://github.com/git/git/commit/969de3ff0e0#commitcomment-33257187
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These unused parameters were introduced recently as part of the
br/blame-ignore topic. I assume they are not indicative of bugs, but are
just leftovers from the development process (they were introduced by the
series but not used in any of its iterations).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7814 has repo tree like this
initial-repo
submodule
sub
In each repo 'submodule' and 'sub', a commit is made to add the same
initial file 'a' with the same message 'add a'. If tests run fast
enough, the two commits are made in the same second, resulting
identical commits.
There is nothing wrong with that per-se. But it could make the test
flaky. Currently all submodule odbs are merged back in the main
one (because we can't, or couldn't, access separate submodule repos
otherwise). But eventually we need to access objects from the right
repo.
Because the same commit could sometimes be present in both 'submodule'
and 'sub', if there is a bug looking up objects in the wrong repo,
sometimes it will go unnoticed because it finds the needed object in the
wrong repo anyway.
Fix this by changing commit time after every commit. This makes all
commits unique. Of course there are still identical blobs in different
repos, but because we often lookup commit first, then tree and blob,
unique commits are already quite safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug introduced in 18547aacf5 ("grep/pcre: support utf-8",
2016-06-25) that was missed due to a blindspot in our tests, as
discussed in the previous commit. I then blindly copied the same bug
in 94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) when
adding the PCRE v2 code.
We should not tell PCRE that we're processing UTF-8 just because we're
dealing with non-ASCII. In the case of e.g. "log --encoding=<...>"
under is_utf8_locale() the haystack might be in ISO-8859-1, and the
needle might be in a non-UTF-8 encoding.
Maybe we should be more strict here and die earlier? Should we also be
converting the needle to the encoding in question, and failing if it's
not a string that's valid in that encoding? Maybe.
But for now matching this as non-UTF8 at least has some hope of
producing sensible results, since we know that our default heuristic
of assuming the text to be matched is in the user locale encoding
isn't true when we've explicitly encoded it to be in a different
encoding.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the tests added in 04deccda11 ("log: re-encode commit messages
before grepping", 2013-02-11) to test the regex backends. Those tests
never worked as advertised, due to the is_fixed() optimization in
grep.c (which was in place at the time), and the needle in the tests
being a fixed string.
We'd thus always use the "fixed" backend during the tests, which would
use the kwset() backend. This backend liberally accepts any garbage
input, so invalid encodings would be silently accepted.
In a follow-up commit we'll fix this bug, this test just demonstrates
the existing issue.
In practice this issue happened on Windows, see [1], but due to the
structure of the existing tests & how liberal the kwset code is about
garbage we missed this.
Cover this blind spot by testing all our regex engines. The PCRE
backend will spot these invalid encodings. It's possible that this
test breaks the "basic" and "extended" backends on some systems that
are more anal than glibc about the encoding of locale issues with
POSIX functions that I can remember, but PCRE is more careful about
the validation.
1. https://public-inbox.org/git/nycvar.QRO.7.76.6.1906271113090.44@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function always returns 0, so make it return void instead.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new macro ALLOC_GROW_BY which automatically zeros the added
array elements and takes care of updating the nr value. Use the macro in
code introduced earlier in this patchset.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow combining of multiple filters by simply repeating the --filter
flag. Before this patch, the user had to combine them in a single flag
somewhat awkwardly (e.g. --filter=combine:FOO+BAR), including
URL-encoding the individual filters.
To make this work, in the --filter flag parsing callback, rather than
error out when we detect that the filter_options struct is already
populated, we modify it in-place to contain the added sub-filter. The
existing sub-filter becomes the lhs of the combined filter, and the
next sub-filter becomes the rhs. We also have to URL-encode the LHS and
RHS sub-filters.
We can simplify the operation if the LHS is already a combine: filter.
In that case, we just append the URL-encoded RHS sub-filter to the LHS
spec to get the new spec.
Helped-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jeff Hostetler <git@jeffhostetler.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow callers to specify exactly what characters need to be URL-encoded
and which do not. This new API will be taken advantage of in a patch
later in this set.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the filter_spec string a string_list rather than a raw C string.
The list of strings must be concatted together to make a complete
filter_spec. A future patch will use this capability to build "combine:"
filter specs gradually.
A strbuf would seem to be a more natural choice for this object, but it
unfortunately requires initialization besides just zero'ing out the
memory. This results in all container structs, and all containers of
those structs, etc., to also require initialization. Initializing them
all would be more cumbersome that simply using a string_list, which
behaves properly when its contents are zero'd.
For the purposes of code simplification, change behavior in how filter
specs are conveyed over the protocol: do not normalize the tree:<depth>
filter specs since there should be no server in existence that supports
tree:# but not tree:#k etc.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the check that filter_options->choice is set to higher in the call
stack. This can only be set when the gentle parse function is called
from one of the two call sites.
This is important because in an upcoming patch this may or may not be an
error, and whether it is an error is only known to the
parse_list_objects_filter function.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow combining filters such that only objects accepted by all filters
are shown. The motivation for this is to allow getting directory
listings without also fetching blobs. This can be done by combining
blob:none with tree:<depth>. There are massive repositories that have
larger-than-expected trees - even if you include only a single commit.
A combined filter supports any number of subfilters, and is written in
the following form:
combine:<filter 1>+<filter 2>+<filter 3>
Certain non-alphanumeric characters in each filter must be
URL-encoded.
For now, combined filters must be specified in this form. In a
subsequent commit, rev-list will support multiple --filter arguments
which will have the same effect as specifying one filter argument
starting with "combine:". The documentation will be updated in that
commit, as the URL-encoding scheme is in general not meant to be used
directly by the user, and it is better to describe the URL-encoding
feature in terms of the repeated flag.
Helped-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jeff Hostetler <git@jeffhostetler.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Making errbuf an optional argument complicates error reporting. Fix this
by making all callers supply an errbuf, even if they may ignore it. This
will be important in follow-up patches where the filter-spec parsing has
more pitfalls and possible errors.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The oidset *omits pointer must be accessed by the combine filter in a
type-agnostic way once the graph traversal is over. Store that pointer
in the general `filter` struct. This will be used in a follow-up patch
to implement the combine filter.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encapsulate filter_fn, filter_free_fn, and filter_data into their own
opaque struct.
Due to opaqueness, filter_fn and filter_free_fn can no longer be
accessed directly by users. Currently, all usages of filter_fn are
guarded by a necessary check:
(obj->flags & NOT_USER_GIVEN) && filter_fn
Take the opportunity to include this check into the new function
list_objects_filter__filter_object(), so that we no longer need to write
this check at every caller of the filter function.
Also, the init functions in list-objects-filter.c no longer need to
confusingly return the filter constituents in various places (filter_fn
and filter_free_fn as out parameters, and filter_data as the function's
return value); they can just initialize the "struct filter" passed in.
Helped-by: Jeff Hostetler <git@jeffhostetler.com>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cfe004a5a9 (ref-filter: limit traversal to prefix, 2017-05-22),
the ref-filter code has sought to limit the traversals to a prefix of
the given patterns.
That code stopped short of handling more than one pattern, because it
means invoking 'for_each_ref_in' multiple times. If we're not careful
about which patterns overlap, we will output the same refs multiple
times.
For instance, consider the set of patterns 'refs/heads/a/*',
'refs/heads/a/b/c', and 'refs/tags/v1.0.0'. If we naïvely ran:
for_each_ref_in("refs/heads/a/*", ...);
for_each_ref_in("refs/heads/a/b/c", ...);
for_each_ref_in("refs/tags/v1.0.0", ...);
we would see 'refs/heads/a/b/c' (and everything underneath it) twice.
Instead, we want to partition the patterns into disjoint sets, where we
know that no ref will be matched by any two patterns in different sets.
In the above, these are:
- {'refs/heads/a/*', 'refs/heads/a/b/c'}, and
- {'refs/tags/v1.0.0'}
Given one of these disjoint sets, what is a suitable pattern to pass to
'for_each_ref_in'? One approach is to compute the longest common prefix
over all elements in that disjoint set, and let the caller cull out the
refs they didn't want. Computing the longest prefix means that in most
cases, we won't match too many things the caller would like to ignore.
The longest common prefixes of the above are:
- {'refs/heads/a/*', 'refs/heads/a/b/c'} -> refs/heads/a/*
- {'refs/tags/v1.0.0'} -> refs/tags/v1.0.0
We instead invoke:
for_each_ref_in("refs/heads/a/*", ...);
for_each_ref_in("refs/tags/v1.0.0", ...);
Which provides us with the refs we were looking for with a minimal
amount of extra cruft, but never a duplicate of the ref we asked for.
Implemented here is an algorithm which accomplishes the above, which
works as follows:
1. Lexicographically sort the given list of patterns.
2. Initialize 'prefix' to the empty string, where our goal is to
build each element in the above set of longest common prefixes.
3. Consider each pattern in the given set, and emit 'prefix' if it
reaches the end of a pattern, or touches a wildcard character. The
end of a string is treated as if it precedes a wildcard. (Note that
there is some room for future work to detect that, e.g., 'a?b' and
'abc' are disjoint).
4. Otherwise, recurse on step (3) with the slice of the list
corresponding to our current prefix (i.e., the subset of patterns
that have our prefix as a literal string prefix.)
This algorithm is 'O(kn + n log(n))', where 'k' is max(len(pattern)) for
each pattern in the list, and 'n' is len(patterns).
By discovering this set of interesting patterns, we reduce the runtime
of multi-pattern 'git for-each-ref' (and other ref traversals) from
O(N) to O(n log(N)), where 'N' is the total number of packed references.
Running 'git for-each-ref refs/tags/a refs/tags/b' on a repository with
10,000,000 refs in 'refs/tags/huge-N', my best-of-five times drop from:
real 0m5.805s
user 0m5.188s
sys 0m0.468s
to:
real 0m0.001s
user 0m0.000s
sys 0m0.000s
On linux.git, the times to dig out two of the latest -rc tags drops from
0.002s to 0.001s, so the change on repositories with fewer tags is much
less noticeable.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make sure that the previously displayed progress line is completely
covered up when the new line is shorter, commit 545dc345eb (progress:
break too long progress bar lines, 2019-04-12) added a bunch of
calculations to figure out how many characters it needs to overwrite
with spaces.
Use the just introduced term_clear_line() helper function to, well,
clear the last line, making all these calculations unnecessary, and
thus simplifying the code considerably.
Three tests in 't5541-http-push-smart.sh' 'grep' for specific text
shown in the progress lines at the beginning of the line, but now
those lines begin either with the ANSI escape sequence or with the
terminal width worth of space characters clearing the line. Relax the
'grep' patterns to match anywhere on the line. Note that only two of
these three tests fail without relaxing their 'grep' pattern, but the
third looks for the absence of the pattern, so it still succeeds, but
without the adjustment would potentially hide future regressions.
Note also that with this change we no longer need the length of the
previously displayed progress line, so the strbuf added to 'struct
progress' in d53ba841d4 (progress: assemble percentage and counters in
a strbuf before printing, 2019-04-05) is not strictly necessary
anymore. We still keep it, though, as it avoids allocating and
releasing a strbuf each time the progress is updated.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command with the 'exec' instruction during an
interactive rebase session, or for a range of commits using 'git
rebase -x', the output can be a bit garbled when the name of the
command is short enough:
$ git rebase -x true HEAD~5
Executing: true
Executing: true
Executing: true
Executing: true
Executing: true)
Successfully rebased and updated refs/heads/master.
Note the ')' at the end of the last line. It gets more garbled as the
range of commits increases:
$ git rebase -x true HEAD~50
Executing: true)
[ repeated 3 more times ]
Executing: true0)
[ repeated 44 more times ]
Executing: true00)
Successfully rebased and updated refs/heads/master.
Those extra numbers and ')' are remnants of the previously displayed
"Rebasing (N/M)" progress lines that are usually completely
overwritten by the "Executing: <cmd>" lines, unless 'cmd' is short and
the "N/M" part is long.
Make sure that the previously displayed "Rebasing (N/M)" line is
cleared by using the term_clear_line() helper function added in the
previous patch. Do so only when not being '--verbose', because in
that case these "Rebasing (N/M)" lines are not printed as progress
(i.e. as lines with '\r' at the end), but as "regular" output (with
'\n' at the end).
A couple of other rebase commands print similar messages, e.g.
"Stopped at <abbrev-oid>... <subject>" for the 'edit' or 'break'
commands, or the "Successfully rebased and updated <full-ref>." at the
very end. These are so long that they practically always overwrite
that "Rebasing (N/M)" progress line, but let's be prudent, and clear
the last line before printing these, too.
In 't3420-rebase-autostash.sh' two helper functions prepare the
expected output of four tests that check the full output of 'git
rebase' and thus are affected by this change, so adjust their
expectations to account for the new line clearing.
Note that this patch doesn't completely eliminate the possibility of
similar garbled outputs, e.g. some error messages from rebase or the
"Auto-merging <file>" message from within the depths of the merge
machinery might not be long enough to completely cover the last
"Rebasing (N/M)" line. This patch doesn't do anything about them,
because dealing with them individually would result in way too much
churn, while having a catch-all term_clear_line() call in the common
code path of pick_commits() would hide the "Rebasing (N/M)" line way
too soon, and it would either flicker or be invisible.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many Win32 API functions actually exist in two variants: one with
the `A` suffix that takes ANSI parameters (`char *` or `const char *`)
and one with the `W` suffix that takes Unicode parameters (`wchar_t *`
or `const wchar_t *`).
The ANSI variant assumes that the strings are encoded according to
whatever is the current locale. This is not what Git wants to use on
Windows: we assume that `char *` variables point to strings encoded in
UTF-8.
There is a pseudo UTF-8 locale on Windows, but it does not work
as one might expect. In addition, if we overrode the user's locale, that
would modify the behavior of programs spawned by Git (such as editors,
difftools, etc), therefore we cannot use that pseudo locale.
Further, it is actually highly encouraged to use the Unicode versions
instead of the ANSI versions, so let's do precisely that.
Note: when calling the Win32 API functions _without_ any suffix, it
depends whether the `UNICODE` constant is defined before the relevant
headers are #include'd. Without that constant, the ANSI variants are
used. Let's be explicit and avoid that ambiguity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we would have obtained the user name encoded in whatever the
current code page is.
Note: the "user name" here does not denote the full name but instead the
short logon name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows >= Vista, not having an application manifest with a
requestedExecutionLevel can cause several kinds of confusing behavior.
The first and more obvious behavior is "Installer Detection" of the
"User Account Control" (also known as "UAC") feature, where Windows
sometimes decides (by looking at things like the file name and even
sequences of bytes within the executable) that an executable is an
installer and should run elevated (causing the well-known popup dialog
to appear). In Git's context, subcommands such as "git patch-id" or "git
update-index" fall prey to this behavior.
The second and more confusing behavior is "File Virtualization". It
means that when files are written without having write permission, it
does not fail (as expected), but they are instead redirected to
somewhere else. When the files are read, the original contents are
returned, though, not the ones that were just written somewhere else.
Even more confusing, not all write accesses are redirected; Trying to
write to write-protected .exe files, for example, will fail instead of
redirecting.
In addition to being unwanted behavior, File Virtualization causes
dramatic slowdowns in Git (see for instance
http://code.google.com/p/msysgit/issues/detail?id=320).
A third unwanted behavior of Windows >= Vista is that it lies about the
Windows version when calling `GetWindowsVersionEx()`.
There are two ways to prevent these unwanted behaviors: Either you embed
an application manifest (which really is an XML document conforming to a
specific schema) within all your executables, or you add an external
manifest (a file with the same name followed by `.manifest`) to all your
executables. Since Git's builtins are hardlinked (or copied), it is
simpler and more robust to embed a manifest.
Recent enough MSVC compilers already embed a working internal manifest,
and building with mingw-w64 (which is the case in Git for Windows' SDK)
does it, too, but for MinGW you have to do so by hand.
In any case, it is better to be explicit about this manifest, that way
changes in the compiler toolchain won't surprise us (as mingw-w64 once
did when it broke `GetWindowsVersionEx()` by mistake).
References:
- New UAC Technologies for Windows Vista
http://msdn.microsoft.com/en-us/library/bb756960.aspx
- Create and Embed an Application Manifest (UAC)
http://msdn.microsoft.com/en-us/library/bb756929.aspx
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To reduce Git for Windows' attack surface, we started using the Address
Space Layout Randomization and Data Execution Prevention features in
ce6a158561 (mingw: enable DEP and ASLR, 2019-05-08).
To remove yet another attack vector, let's make use of gcc's stack
smashing protector that helps detect stack buffer overruns early.
Rather than using -fstack-protector, we use -fstack-protector-strong
because on Windows: The latter appears to strike a better balance
between the performance impact and the provided safety.
In a non-scientific test (time git log --grep=is -p), best of 5 timings
went from 23.009s to 22.997s, i.e. the performance impact was *well*
lost in the noise.
This fixes https://github.com/git-for-windows/git/issues/501
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a couple of places where 'struct repository' is already passed
around, but the_repository is still used. Use the right repo.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, clean up the_repo usage in builtin/merge-tree.c a tiny
bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
an apparent typo for the environment variable was included with 81567caf87
("trace2: update docs to describe system/global config settings",
2019-04-15), and was missed when renamed variables by e4b75d6a1d
("trace2: rename environment variables to GIT_TRACE2*", 2019-05-19)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit 4a72486de9 ("fix cherry-pick/revert status after commit",
2019-04-16) used parse_insn_line() to parse the first line of the todo
list to check if it was a pick or revert. However if the todo list is
left over from an old cherry-pick or revert and references a commit that
no longer exists then parse_insn_line() prints an error message which is
confusing for users [1]. Instead parse just the command name so that the
user is alerted to the presence of stale sequencer state by status
reporting that a cherry-pick or revert is in progress.
Note that we should not be leaving stale sequencer state lying around
(or at least not as often) after commit b07d9bfd17 ("commit/reset: try
to clean up sequencer state", 2019-04-16). However the user may still
have stale state that predates that commit.
Also avoid printing an error message if for some reason the user has a
file called `sequencer` in $GIT_DIR.
[1] https://public-inbox.org/git/3bc58c33-4268-4e7c-bf1a-fe349b3cb037@www.fastmail.com/
Reported-by: Espen Antonsen <espen@inspired.no>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the code that parses the name of the command at the start of
each line in the todo file into its own function so that it can be used
in the next commit.
As I don't want to burden other callers with having to pass in a pointer
to the end of the line the test for an abbreviated command is
changed. This change should not affect the behavior. Instead of testing
`eol == bol + 1` the new code checks for the end of the line by testing
for '\n', '\r' or '\0' following the abbreviated name. To avoid reading
past the end of an empty string it also checks that there is actually a
single character abbreviation before testing if it matches. This
prevents it from matching '\0' as the abbreviated name and then trying
to read another character.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that parses the todo list allows an unabbreviated command name
to be followed by a space or a tab, but if the command name is
abbreviated it only allows a space after it. Fix this inconsistency.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When run using GIT_TEST_PROTOCOL_VERSION=2, a test in t5551 fails
because 4 POSTs (probe, ls-refs, probe, fetch) are sent instead of 2
(probe, fetch).
One way to resolve this would be to relax the condition (from "= 2" to
greater than 1, say), but upon further inspection, the test probably
shouldn't be counting the number of POSTs. This test states that large
requests are split across POSTs, but this is not correct; the main
change is that chunked transfer encoding is used, but the request is
still contained within one POST. (The test coincidentally works because
Git indeed sends 2 POSTs in the case of a large request, but that is
because, as stated above, the first POST is a probing RPC - see
post_rpc() in remote-curl.c for more information.)
Therefore, instead of counting POSTs, check that chunked transfer
encoding is used. This also has the desirable side effect of passing
with GIT_TEST_PROTOCOL_VERSION=2.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can have a different default partial clone filter for
each promisor remote, let's hide core_partial_clone_filter_default
as a static in promisor-remote.c to avoid it being use for
anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have has_promisor_remote() and can use many
promisor remotes, let's hide repository_format_partial_clone
as a static in promisor-remote.c to avoid it being use
for anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As fetch_objects() is now used only in promisor-remote.c
and should't be used outside it, let's move it into
promisor-remote.c, make it static there, and remove
fetch-object.{c,h}.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, let's remove a reference to ODB effort as the ODB
effort has been replaced by directly enhancing partial clone
and promisor remote features.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shows that it is now possible to fetch objects from more
than one promisor remote, and that fetching from a new
promisor remote can configure it as one.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the infrastructure for more than one promisor remote
has been introduced in previous patches, we can remove
code that forbids the registration of more than one
promisor remote.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it possible to specify a different partial clone
filter for each promisor remote.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the repository_format_partial_clone global
and fetch_objects() directly, let's use has_promisor_remote()
and promisor_remote_get_direct().
This way all the configured promisor remotes will be taken
into account, not only the one specified by
extensions.partialClone.
Also when cloning or fetching using a partial clone filter,
remote.origin.promisor will be set to "true" instead of
setting extensions.partialClone to "origin". This makes it
possible to use many promisor remote just by fetching from
them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A remote specified using the extensions.partialClone config
option should be considered a promisor remote too.
For simplicity and to make things predictable, this promisor
remote should be either always the last one we try to get
objects from, or the first one. So it should always be either
at the end of the promisor remote list, or at its start.
We decided to make it the last one we try, because it is
likely that someone using many promisor remotes is doing so
because the other promisor remotes are better for some reason
(maybe they are closer or faster for some kind of objects)
than the origin, and the origin is likely to be the remote
specified by extensions.partialClone.
This justification is not very strong, but one choice had to
be made, and anyway the long term plan should be to make the
order somehow fully configurable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need to reinitialize the promisor remote configuration
as we will make some changes to it in a later commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The promisor-remote.{c,h} files will contain functions to
manage many promisor remotes.
We expect that there will not be a lot of promisor remotes,
so it is ok to use a simple linked list to manage them.
Helped-by: Jeff King <peff@peff.net>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callers of the fetch_object() and fetch_objects() might
be interested in knowing if these functions succeeded or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's not run a git command, especially one with "verify" in its
name, upstream of a pipe, because the pipe will hide the git
command's exit code.
While at it, let's also avoid a useless `cat` command piping
into `sed`.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
