These tests are just trying to show that we allow recursion
up to a certain depth, but not past it. But the counting is
a bit non-intuitive, and rather than test at the edge of the
breakage, we test "OK" cases in the middle of the chain.
Let's explain what's going on, and explicitly test the
switch between "OK" and "too deep".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to the previous patch, though no user reported a bug and
I could not find a regressive behavior.
However it is a good thing to be strict on the output and for that we
always omit a trailing slash.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 63e95beb0 (2016-04-15, submodule: port resolve_relative_url from
shell to C), it did not matter if the superprojects URL had a trailing
slash or not. It was just chopped off as one of the first steps
(The "remoteurl=${remoteurl%/}" near the beginning of
resolve_relative_url(), which was removed in said commit).
When porting this to the C version, an off-by-one error was introduced
and we did not check the actual last character to be a slash, but the
NULL delimiter.
Reintroduce the behavior from before 63e95beb0, to ignore the trailing
slash.
Reported-by: <venv21@gmail.com>
Helped-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pathspecs can be a bit tricky when trying to apply them to submodules.
The main challenge is that the pathspecs will be with respect to the
superproject and not with respect to paths in the submodule. The
approach this patch takes is to pass in the identical pathspec from the
superproject to the submodule in addition to the submodule-prefix, which
is the path from the root of the superproject to the submodule, and then
we can compare an entry in the submodule prepended with the
submodule-prefix to the pathspec in order to determine if there is a
match.
This patch also permits the pathspec logic to perform a prefix match against
submodules since a pathspec could refer to a file inside of a submodule.
Due to limitations in the wildmatch logic, a prefix match is only done
literally. If any wildcard character is encountered we'll simply punt
and produce a false positive match. More accurate matching will be done
once inside the submodule. This is due to the superproject not knowing
what files could exist in the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass through some known-safe options when recursing into submodules.
(--cached, -v, -t, -z, --debug, --eol)
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow ls-files to recognize submodules in order to retrieve a list of
files from a repository's submodules. This is done by forking off a
process to recursively call ls-files on all submodules. Use top-level
--super-prefix option to pass a path to the submodule which it can
use to prepend to output or pathspec matching logic.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our ref resolution first runs lstat() on any path we try to
look up, because we want to treat symlinks specially (by
resolving them manually and considering them symrefs). But
if the results of `readlink` do _not_ look like a ref, we
fall through to treating it like a normal file, and just
read the contents of the linked path.
Since fcb7c76 (resolve_ref_unsafe(): close race condition
reading loose refs, 2013-06-19), that "normal file" code
path will stat() the file and if we see ENOENT, will jump
back to the lstat(), thinking we've seen inconsistent
results between the two calls. But for a symbolic ref, this
isn't a race: the lstat() found the symlink, and the stat()
is looking at the path it points to. We end up in an
infinite loop calling lstat() and stat().
We can fix this by avoiding the retry-on-inconsistent jump
when we know that we found a symlink. While we're at it,
let's add a comment explaining why the symlink case gets to
this code in the first place; without that, it is not
obvious that the correct solution isn't to avoid the stat()
code path entirely.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
* rs/c-auto-resets-attributes:
pretty: avoid adding reset for %C(auto) if output is empty
"git log rev^..rev" is an often-used revision range specification
to show what was done on a side branch merged at rev. This has
gained a short-hand "rev^-1". In general "rev^-$n" is the same as
"^rev^$n rev", i.e. what has happened on other branches while the
history leading to nth parent was looking the other way.
* vn/revision-shorthand-for-side-branch-log:
revision: new rev^-n shorthand for rev^n..rev
When given an abbreviated object name that is not (or more
realistically, "no longer") unique, we gave a fatal error
"ambiguous argument". This error is now accompanied by hints that
lists the objects that begins with the given prefix. During the
course of development of this new feature, numerous minor bugs were
uncovered and corrected, the most notable one of which is that we
gave "short SHA1 xxxx is ambiguous." twice without good reason.
* jk/ambiguous-short-object-names:
get_short_sha1: make default disambiguation configurable
get_short_sha1: list ambiguous objects on error
for_each_abbrev: drop duplicate objects
sha1_array: let callbacks interrupt iteration
get_short_sha1: mark ambiguity error for translation
get_short_sha1: NUL-terminate hex prefix
get_short_sha1: refactor init of disambiguation code
get_short_sha1: parse tags when looking for treeish
get_sha1: propagate flags to child functions
get_sha1: avoid repeating ourselves via ONLY_TO_DIE
get_sha1: detect buggy calls with multiple disambiguators
With the preparatory steps, it has become trivial to teach the
system a new diff.wsErrorHighlight configuration that gives the
default value for --ws-error-highlight command line option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'd want to run this same set of test twice, once with the option
and another time with an equivalent configuration setting. Split
out the step that prepares the test data and expected output and
move the test for the command line option into a separate test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our usual style when working with subdirectories is to chdir
inside a subshell or to use "git -C", which means we do not
have to constantly return to the main test directory. Let's
convert this old test, which does not follow that style.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our normal test style these days puts the opening quote of
the body on the description line, and indents the body with
a single tab. This ancient test did not follow this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Besides being our normal style, this correctly checks for an
error exit() versus signal death.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function makes sure that "git fsck" does not report any
errors. But "--full" has been the default since f29cd39
(fsck: default to "git fsck --full", 2009-10-20), and we can
use the exit code (instead of counting the lines) since
e2b4f63 (fsck: exit with non-zero status upon errors,
2007-03-05).
So we can just use "git fsck", which is shorter and more
flexible (e.g., we can use "git -C").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was never used since its inception in dd05ea1
(test case for transitive info/alternates, 2006-05-07).
Which is just as well, since it mutates the repo state in a
way that would invalidate further tests, without cleaning up
after itself. Let's get rid of it so that nobody is tempted
to use it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath in "git fsck" to detect malformed tree objects has
been updated not to die but keep going after detecting them.
* dt/tree-fsck:
fsck: handle bad trees like other errors
tree-walk: be more specific about corrupt tree errors
An author name, that spelled a backslash-quoted double quote in the
human readable part "My \"double quoted\" name", was not unquoted
correctly while applying a patch from a piece of e-mail.
* kd/mailinfo-quoted-string:
mailinfo: unescape quoted-pair in header fields
t5100-mailinfo: replace common path prefix with variable
"git init" tried to record core.worktree in the repository's
'config' file when GIT_WORK_TREE environment variable was set and
it was different from where GIT_DIR appears as ".git" at its top,
but the logic was faulty when .git is a "gitdir:" file that points
at the real place, causing trouble in working trees that are
managed by "git worktree". This has been corrected.
* nd/init-core-worktree-in-multi-worktree-world:
init: kill git_link variable
init: do not set unnecessary core.worktree
init: kill set_git_dir_init()
init: call set_git_dir_init() from within init_db()
init: correct re-initialization from a linked worktree
"gitweb" can spawn "highlight" to show blob contents with
(programming) language-specific syntax highlighting, but only
when the language is known. "highlight" can however be told
to make the guess itself by giving it "--force" option, which
has been enabled.
* ik/gitweb-force-highlight:
gitweb: use highlight's shebang detection
gitweb: remove unused guess_file_syntax() parameter
"git pack-objects --include-tag" was taught that when we know that
we are sending an object C, we want a tag B that directly points at
C but also a tag A that points at the tag B. We used to miss the
intermediate tag B in some cases.
* jk/pack-tag-of-tag:
pack-objects: walk tag chains for --include-tag
t5305: simplify packname handling
t5305: use "git -C"
t5305: drop "dry-run" of unpack-objects
t5305: move cleanup into test block
We emit an escape sequence for resetting color and attribute for
%C(auto) to make sure automatic coloring is displayed as intended.
Stop doing that if the output strbuf is empty, i.e. when %C(auto)
appears at the start of the format string, because then there is no
need for a reset and we save a few bytes in the output.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git format-patch --stdout" output is placed as an in-body
header and it uses the RFC2822 header folding, "git am" failed to
put the header line back into a single logical line. The
underlying "git mailinfo" was taught to handle this properly.
* jt/mailinfo-fold-in-body-headers:
mailinfo: handle in-body header continuations
mailinfo: make is_scissors_line take plain char *
mailinfo: separate in-body header processing
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.
* nd/checkout-disambiguation:
checkout: fix ambiguity check in subdir
checkout.txt: document a common case that ignores ambiguation rules
checkout: add some spaces between code and comment
Even when "git pull --rebase=preserve" (and the underlying "git
rebase --preserve") can complete without creating any new commit
(i.e. fast-forwards), it still insisted on having a usable ident
information (read: user.email is set correctly), which was less
than nice. As the underlying commands used inside "git rebase"
would fail with a more meaningful error message and advice text
when the bogus ident matters, this extra check was removed.
* jk/rebase-i-drop-ident-check:
rebase-interactive: drop early check for valid ident
"git format-patch --base=..." feature that was recently added
showed the base commit information after "-- " e-mail signature
line, which turned out to be inconvenient. The base information
has been moved above the signature line.
* jt/format-patch-base-info-above-sig:
format-patch: show base info before email signature
Performance tests done via "t/perf" did not use the same set of
build configuration if the user relied on autoconf generated
configuration.
* ks/perf-build-with-autoconf:
t/perf/run: copy config.mak.autogen & friends to build area
"git diff -W" output needs to extend the context backward to
include the header line of the current function and also forward to
include the body of the entire current function up to the header
line of the next one. This process may have to merge to adjacent
hunks, but the code forgot to do so in some cases.
* rs/xdiff-merge-overlapping-hunks-for-W-context:
xdiff: fix merging of hunks with -W context and -u context
"git fetch http::/site/path" did not die correctly and segfaulted
instead.
* jk/fix-remote-curl-url-wo-proto:
remote-curl: handle URLs without protocol
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rfc2822 has provisions for quoted strings in structured header fields,
but also allows for escaping these with so-called quoted-pairs.
The only thing git currently does is removing exterior quotes, but
quotes within are left alone.
Remove exterior quotes and remove escape characters so that they don't
show up in the author field.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests need to store data in a file, and repeat the same pattern to
refer to that path:
"$TEST_DIRECTORY"/t5100/
Create a variable that contains this path, and use that instead.
While we're making this change, make sure the quotes are not just around
the variable, but around the entire string to not give the impression
we want shell splitting to affect the other variables.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of dying when fsck hits a malformed tree object, log the error
like any other and continue. Now fsck can tell the user which tree is
bad, too.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the tree-walker runs into an error, it just calls
die(), and the message is always "corrupt tree file".
However, we are actually covering several cases here; let's
give the user a hint about what happened.
Let's also avoid using the word "corrupt", which makes it
seem like the data bit-rotted on disk. Our sha1 check would
already have found that. These errors are ones of data that
is malformed in the first place.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log rev^..rev" is commonly used to show all work done on and merged
from a side branch. This patch introduces a shorthand "rev^-" for this
and additionally allows "rev^-$n" to mean "reachable from rev, excluding
what is reachable from the nth parent of rev". For example, for a
two-parent merge, you can use rev^-2 to get the set of commits which were
made to the main branch while the topic branch was prepared.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find ambiguous short sha1s, we may get a
disambiguation rule from our caller's context. But if we
don't, we fall back to treating all sha1s the same, even
though most projects will tend to refer only to commits by
their short sha1s.
This patch introduces a configuration option that lets the
user pick a different fallback (e.g., only commits). It's
possible that we may want to make this the default, but it's
a good idea to start as a config option for two reasons:
1. It lets people experiment with this and see if it's a
good idea (i.e., the "tend to" above is an assumption;
we don't really know if this will break some obscure
cases).
2. Even if we do flip the default, it gives people an
escape hatch if it causes problems (you can sometimes
override it by asking for "1234^{tree}", but not all
combinations are possible).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.
* nd/checkout-disambiguation:
checkout: fix ambiguity check in subdir
checkout.txt: document a common case that ignores ambiguation rules
checkout: add some spaces between code and comment
Even more i18n.
* va/i18n-more:
i18n: stash: mark messages for translation
i18n: notes-merge: mark die messages for translation
i18n: ident: mark hint for translation
i18n: i18n: diff: mark die messages for translation
i18n: connect: mark die messages for translation
i18n: commit: mark message for translation
In some projects, it is common to use "[RFC PATCH]" as the subject
prefix for a patch meant for discussion rather than application. A
new option "--rfc" was a short-hand for "--subject-prefix=RFC PATCH"
to help the participants of such projects.
* jt/format-patch-rfc:
format-patch: add "--rfc" for the common case of [RFC PATCH]
Output from "git diff" can be made easier to read by selecting
which lines are common and which lines are added/deleted
intelligently when the lines before and after the changed section
are the same. A command line option is added to help with the
experiment to find a good heuristics.
* mh/diff-indent-heuristic:
blame: honor the diff heuristic options and config
parse-options: add parse_opt_unknown_cb()
diff: improve positioning of add/delete blocks in diffs
xdl_change_compact(): introduce the concept of a change group
recs_match(): take two xrecord_t pointers as arguments
is_blank_line(): take a single xrecord_t as argument
xdl_change_compact(): only use heuristic if group can't be matched
xdl_change_compact(): fix compaction heuristic to adjust ixo
The pretty-format specifier "%C(auto)" used by the "log" family of
commands to enable coloring of the output is taught to also issue a
color-reset sequence to the output.
* rs/c-auto-resets-attributes:
pretty: let %C(auto) reset all attributes
When the user gives us an ambiguous short sha1, we print an
error and refuse to resolve it. In some cases, the next step
is for them to feed us more characters (e.g., if they were
retyping or cut-and-pasting from a full sha1). But in other
cases, that might be all they have. For example, an old
commit message may have used a 7-character hex that was
unique at the time, but is now ambiguous. Git doesn't
provide any information about the ambiguous objects it
found, so it's hard for the user to find out which one they
probably meant.
This patch teaches get_short_sha1() to list the sha1s of the
objects it found, along with a few bits of information that
may help the user decide which one they meant. Here's what
it looks like on git.git:
$ git rev-parse b2e1
error: short SHA1 b2e1 is ambiguous
hint: The candidates are:
hint: b2e1196 tag v2.8.0-rc1
hint: b2e11d1 tree
hint: b2e1632 commit 2007-11-14 - Merge branch 'bs/maint-commit-options'
hint: b2e1759 blob
hint: b2e18954 blob
hint: b2e1895c blob
fatal: ambiguous argument 'b2e1': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
We show the tagname for tags, and the date and subject for
commits. For trees and blobs, in theory we could dig in the
history to find the paths at which they were present. But
that's very expensive (on the order of 30s for the kernel),
and it's not likely to be all that helpful. Most short
references are to commits, so the useful information is
typically going to be that the object in question _isn't_ a
commit. So it's silly to spend a lot of CPU preemptively
digging up the path; the user can do it themselves if they
really need to.
And of course it's somewhat ironic that we abbreviate the
sha1s in the disambiguation hint. But full sha1s would cause
annoying line wrapping for the commit lines, and presumably
the user is going to just re-issue their command immediately
with the corrected sha1.
We also restrict the list to those that match any
disambiguation hint. E.g.:
$ git rev-parse b2e1:foo
error: short SHA1 b2e1 is ambiguous
hint: The candidates are:
hint: b2e1196 tag v2.8.0-rc1
hint: b2e11d1 tree
hint: b2e1632 commit 2007-11-14 - Merge branch 'bs/maint-commit-options'
fatal: Invalid object name 'b2e1'.
does not bother reporting the blobs, because they cannot
work as a treeish.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an object appears multiple times in the object database
(e.g., in both loose and packed form, or in two separate
packs), the disambiguation machinery may see it more than
once. The get_short_sha1() function handles this already,
but for_each_abbrev() blindly fires the callback for each
instance it finds.
We can fix this by collecting the output in a sha1 array and
de-duplicating it. As a bonus, the sort done for the
de-duplication means that our output will be stable,
regardless of the order in which the objects are found.
Note that the old code normalized the callback's output to
0/1 to store in the 1-bit ds->ambiguous flag (which both
halted the iteration and was returned from the
for_each_abbrev function). Now that we are using sha1_array,
we can return the real value. In practice, it doesn't matter
as the sole caller only ever returns 0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
