Both of these existed to allow us to reuse all the merge-related tests
in the testsuite while easily flipping between the 'recursive' and the
'ort' backends. Now that we have removed merge-recursive and remapped
'recursive' to mean 'ort', we don't need this scaffolding anymore.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from merge-recursive to merge-ort. Adjust the following
testcases due to the switch:
* t6430: most of the test differences here were due to improved D/F
conflict handling explained in more detail in ef52778708 (merge
tests: expect improved directory/file conflict handling in ort,
2020-10-26). These changes weren't made to this test back in that
commit simply because I had been looking at `git merge` rather than
`git merge-recursive`. The final test in this testsuite, though, was
expunged because it was looking for specific output, and the calls to
output_commit_title() were discarded from merge_ort_internal() in its
adaptation from merge_recursive_internal(); see 8119214f4e
(merge-ort: implement merge_incore_recursive(), 2020-12-16).
* t6434: This test is built entirely around rename/delete conflicts,
which had a suboptimal handling under merge-recursive. As explained
in more detail in commits 1f3c9ba707 ("t6425: be more flexible with
rename/delete conflict messages", 2020-08-10) and 727c75b23f ("t6404,
t6423: expect improved rename/delete handling in ort backend",
2020-10-26), rename/delete conflicts should each have two entries in
the index rather than just one. Adjust the expectations for all the
tests in this testcase to see the two entries per rename/delete
conflict.
* t6424: merge-recursive had a special check-if-toplevel-trees-match
check that it ran at the beginning on both the merge-base and the
other side being merged in. In such a case, it exited early and
printed an "Already up to date." message. merge-ort got rid of
this, and instead checks the merge base tree matching the other
side throughout the tree instead of just at the toplevel, allowing
it to avoid recursing into various subtrees. As part of that, it
got rid of the specialty toplevel message. That message hasn't
been missed for years from `git merge`, so I don't think it is
necessary to keep it just for `git merge-recursive`, especially
since the latter is rarely used. (git itself only references it
in the testsuite, whereas it used to power one of the three
rebase backends that existed once upon a time.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the default value for TEST_PASSES_SANITIZE_LEAK is `true` there
is no longer a need to have that variable declared in all of our tests.
Drop it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling either the recursive or the ORT merge machineries we need
to provide a list of merge bases. The ownership of that parameter is
then implicitly transferred to the callee, which is somewhat fishy.
Furthermore, that list may leak in some cases where the merge machinery
runs into an error, thus causing a memory leak.
Refactor the code such that we stop transferring ownership. Instead, the
merge machinery will now create its own local copies of the passed in
list as required if they need to modify the list. Free the list at the
callsites as required.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove untracked files that are unwanted after they are done being used.
While the set of cases in this patch is certainly far from
comprehensive, it was motivated by some work to see what the fallout
would be if we were to make the removal of untracked files as a side
effect of other commands into an error. Some cases were a bit more
involved than the testcase changes included in this patch, but the ones
included here represent the simple cases. While this patch is not that
important since we are not changing the behavior of those other commands
into an error in the near term, I thought these changes were useful
anyway as an explicit documentation of the intent that these untracked
files are no longer useful.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t6[4-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a number of tests that the "recursive" backend does not handle
correctly but which the redesign in "ort" will. Add a new helper in
lib-merge.sh for selecting a different test expectation based on the
setting of GIT_TEST_MERGE_ALGORITHM, and use it in various testcases to
document which ones we expect to fail under recursive but pass under
ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the near future, we want to change Git's default branch name to
`main`. In preparation for that, stop using it as a branch name in the
test suite. Replace that branch name by `topic`, the same name we used
to rename variations of `master` in b6211b89eb (tests: avoid variations
of the `master` branch name, 2020-09-26).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for the merge machinery are spread over several places.
Collect them into t64xx for simplicity. Some notes:
t60[234]*.sh:
Merge tests started in t602*, overgrew bisect and remote tracking
tests in t6030, t6040, and t6041, and nearly overtook replace tests
in t6050. This made picking out relevant tests that I wanted to run
in a tighter loop slightly more annoying for years.
t303*.sh:
These started out as tests for the 'merge-recursive' toplevel command,
but did not restrict to that and had lots of overlap with the
underlying merge machinery.
t7405, t7613:
submodule-specific merge logic started out in submodule.c but was
moved to merge-recursive.c in commit 18cfc08866 ("submodule.c: move
submodule merging to merge-recursive.c", 2018-05-15). Since these
tests are about the logic found in the merge machinery, moving these
tests to be with the merge tests makes sense.
t7607, t7609:
Having tests spread all over the place makes it more likely that
additional tests related to a certain piece of logic grow in all those
other places. Much like t303*.sh, these two tests were about the
underlying merge machinery rather than outer levels.
Tests that were NOT moved:
t76[01]*.sh:
Other than the four tests mentioned above, the remaining tests in
t76[01]*.sh are related to non-recursive merge strategies, parameter
parsing, and other stuff associated with the highlevel builtin/merge.c
rather than the recursive merge machinery.
t3[45]*.sh:
The rebase testcases in t34*.sh also test the merge logic pretty
heavily; sometimes changes I make only trigger failures in the rebase
tests. The rebase tests are already nicely coupled together, though,
and I didn't want to mess that up. Similar comments apply for the
cherry-pick tests in t35*.sh.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
