"git fetch" learned to pay attention to "fetch.all" configuration
variable, which pretends as if "--all" was passed from the command
line when no remote parameter was given.
* tb/fetch-all-configuration:
fetch: add new config option fetch.all
Clearing in-core repository (happens during e.g., "git fetch
--recurse-submodules" with commit graph enabled) made in-core
commit object in an inconsistent state by discarding the necessary
data from commit-graph too early, which has been corrected.
* jk/commit-graph-slab-clear-fix:
commit-graph: retain commit slab when closing NULL commit_graph
Introduce a new extension "refstorage" so that we can mark a
repository that uses a non-default ref backend, like reftable.
* ps/refstorage-extension:
t9500: write "extensions.refstorage" into config
builtin/clone: introduce `--ref-format=` value flag
builtin/init: introduce `--ref-format=` value flag
builtin/rev-parse: introduce `--show-ref-format` flag
t: introduce GIT_TEST_DEFAULT_REF_FORMAT envvar
setup: introduce GIT_DEFAULT_REF_FORMAT envvar
setup: introduce "extensions.refStorage" extension
setup: set repository's formats on init
setup: start tracking ref storage format
refs: refactor logic to look up storage backends
worktree: skip reading HEAD when repairing worktrees
t: introduce DEFAULT_REPO_FORMAT prereq
Sideband demultiplexer fixes.
* jx/sideband-chomp-newline-fix:
pkt-line: do not chomp newlines for sideband messages
pkt-line: memorize sideband fragment in reader
test-pkt-line: add option parser for unpack-sideband
Streaming spans of packfile data used to be done only from a
single, primary, pack in a repository with multiple packfiles. It
has been extended to allow reuse from other packfiles, too.
* tb/multi-pack-verbatim-reuse: (26 commits)
t/perf: add performance tests for multi-pack reuse
pack-bitmap: enable reuse from all bitmapped packs
pack-objects: allow setting `pack.allowPackReuse` to "single"
t/test-lib-functions.sh: implement `test_trace2_data` helper
pack-objects: add tracing for various packfile metrics
pack-bitmap: prepare to mark objects from multiple packs for reuse
pack-revindex: implement `midx_pair_to_pack_pos()`
pack-revindex: factor out `midx_key_to_pack_pos()` helper
midx: implement `midx_preferred_pack()`
git-compat-util.h: implement checked size_t to uint32_t conversion
pack-objects: include number of packs reused in output
pack-objects: prepare `write_reused_pack_verbatim()` for multi-pack reuse
pack-objects: prepare `write_reused_pack()` for multi-pack reuse
pack-objects: pass `bitmapped_pack`'s to pack-reuse functions
pack-objects: keep track of `pack_start` for each reuse pack
pack-objects: parameterize pack-reuse routines over a single pack
pack-bitmap: return multiple packs via `reuse_partial_packfile_from_bitmap()`
pack-bitmap: simplify `reuse_partial_packfile_from_bitmap()` signature
ewah: implement `bitmap_is_empty()`
pack-bitmap: pass `bitmapped_pack` struct to pack-reuse functions
...
The builtin_objectmode attribute is populated for each path
without adding anything in .gitattributes files, which would be
useful in magic pathspec, e.g., ":(attr:builtin_objectmode=100755)"
to limit to executables.
* jw/builtin-objectmode-attr:
attr: add builtin objectmode values support
Piping the output of git commands like git-ls-files to another
command (grep in this case) hides the exit code returned by
these commands. Prevent this by storing the output of git-ls-files
to a temporary file and then "grep-ping" from that file. Replace
grep with test_grep as the latter is more verbose when it fails.
Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git sparse-checkout (add|set) --[no-]cone --end-of-options" did
not handle "--end-of-options" correctly after a recent update.
* en/sparse-checkout-eoo:
sparse-checkout: be consistent with end of options markers
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
"git archive --list extra garbage" silently ignored excess command
line parameters, which has been corrected.
* jc/archive-list-with-extra-args:
archive: "--list" does not take further options
Introduce a boolean configuration option fetch.all which allows to
fetch all available remotes by default. The config option can be
overridden by explicitly specifying a remote or by using --no-all.
The behavior for --all is unchanged and calling git-fetch with --all
and a remote will still result in an error.
Additionally, describe the configuration variable in the config
documentation and implement new tests to cover the expected behavior.
Also add --no-all to the command-line documentation of git-fetch.
Signed-off-by: Tamino Bauknecht <dev@tb6.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression introduced in ac6d45d11f (commit-graph: move
slab-clearing to close_commit_graph(), 2023-10-03), in which running:
git -c fetch.writeCommitGraph=true fetch --recurse-submodules
multiple times in a freshly cloned repository causes a segfault. What
happens in the second (and subsequent) runs is this:
1. We make a "struct commit" for any ref tips which we're storing
(even if we already have them, they still go into FETCH_HEAD).
Because the first run will have created a commit graph, we'll find
those commits in the graph.
The commit struct is therefore created with a NULL "maybe_tree"
entry, because we can load its oid from the graph later. But to do
that we need to remember that we got the commit from the graph,
which is recorded in a global commit_graph_data_slab object.
2. Because we're using --recurse-submodules, we'll try to fetch each
of the possible submodules. That implies creating a separate
"struct repository" in-process for each submodule, which will
require a later call to repo_clear().
The call to repo_clear() calls raw_object_store_clear(), which in
turn calls close_object_store(), which in turn calls
close_commit_graph(). And the latter frees the commit graph data
slab.
3. Later, when trying to write out a new commit graph, we'll ask for
their tree oid via get_commit_tree_oid(), which will see that the
object is parsed but with a NULL maybe_tree field. We'd then
usually pull it from the graph file, but because the slab was
cleared, we don't realize that we can do so! We end up returning
NULL and segfaulting.
(It seems questionable that we'd write a graph entry for such a
commit anyway, since we know we already have one. I didn't
double-check, but that may simply be another side effect of having
cleared the slab).
The bug is in step (2) above. We should not be clearing the slab when
cleaning up the submodule repository structs. Prior to ac6d45d11f, we
did not do so because it was done inside a helper function that returned
early when it saw NULL. So the behavior change from that commit is that
we'll now _always_ clear the slab via repo_clear(), even if the
repository being closed did not have a commit graph (and thus would have
a NULL commit_graph struct).
The most immediate fix is to add in a NULL check in close_commit_graph(),
making it a true noop when passed in an object_store with a NULL
commit_graph (it's OK to just return early, since the rest of its code
is already a noop when passed NULL). That restores the pre-ac6d45d11f
behavior. And that's what this patch does, along with a test that
exercises it (we already have a test that uses submodules along with
fetch.writeCommitGraph, but the bug only triggers when there is a
subsequent fetch and when that fetch uses --recurse-submodules).
So that fixes the regression in the least-risky way possible.
I do think there's some fragility here that we might want to follow up
on. We have a global commit_graph_data_slab that contains graph
positions, and our global commit structs depend on the that slab
remaining valid. But close_commit_graph() is just about closing _one_
object store's graph. So it's dangerous to call that function and clear
the slab without also throwing away any "struct commit" we might have
parsed that depends on it.
Which at first glance seems like a bug we could already trigger. In the
situation described here, there is no commit graph in the submodule
repository, so our commit graph is NULL (in fact, in our test script
there is no submodule repo at all, so we immediately return from
repo_init() and call repo_clear() only to free up memory). But what
would happen if there was one? Wouldn't we see a non-NULL commit_graph
entry, and then clear the global slab anyway?
The answer is "no", but for very bizarre reasons. Remember that
repo_clear() calls raw_object_store_clear(), which then calls
close_object_store() and thus close_commit_graph(). But before it does
so, raw_object_store_clear() does something else: it frees the commit
graph and sets it to NULL! So by this code path we'll _never_ see a
non-NULL commit_graph struct, and thus never clear the slab.
So it happens to work out. But it still seems questionable to me that we
would clear a global slab (which might still be in use) when closing the
commit graph. This clearing comes from 957ba814bf (commit-graph: when
closing the graph, also release the slab, 2021-09-08), and was fixing a
case where we really did need it to be closed (and in that case we
presumably call close_object_store() more directly).
So I suspect there may still be a bug waiting to happen there, as any
object loaded before the call to close_object_store() may be stranded
with a bogus maybe_tree entry (and thus looking at it after the call
might cause an error). But I'm not sure how to trigger it, nor what the
fix should look like (you probably would need to "unparse" any objects
pulled from the graph). And so this patch punts on that for now in favor
of fixing the recent regression in the most direct way, which should not
have any other fallouts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To compute the expected on-disk size of packed objects, we sort the
output of show-index by pack offset and then compute the difference
between adjacent entries using awk. This works but has a few readability
problems:
1. Reading the index in pack order means don't find out the size of an
oid's entry until we see the _next_ entry. So we have to save it to
print later.
We can instead iterate in reverse order, so we compute each oid's
size as we see it.
2. Since the awk invocation is inside a text_expect block, we can't
easily use single-quotes to hold the script. So we use
double-quotes, but then have to escape the dollar signs in the awk
script.
We can swap this out for a shell loop instead (which is made much
easier by the first change).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assorted changes around pseudoref handling.
* ps/pseudo-refs:
bisect: consistently write BISECT_EXPECTED_REV via the refdb
refs: complete list of special refs
refs: propagate errno when reading special refs fails
wt-status: read HEAD and ORIG_HEAD via the refdb
Doc updates to clarify what an "unborn branch" means.
* jc/orphan-unborn:
orphan/unborn: fix use of 'orphan' in end-user facing messages
orphan/unborn: add to the glossary and use them consistently
"git status" is taught to show both the branch being bisected and
being rebased when both are in effect at the same time.
* rj/status-bisect-while-rebase:
status: fix branch shown when not only bisecting
In t9500 we're writing a custom configuration that sets up gitweb. This
requires us to manually ensure that the repository format is configured
as required, including both the repository format version and
extensions. With the introduction of the "extensions.refStorage"
extension we need to update the test to also write this new one.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new `--ref-format` value flag for git-clone(1) that allows
the user to specify the ref format that is to be used for a newly
initialized repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new `--ref-format` value flag for git-init(1) that allows
the user to specify the ref format that is to be used for a newly
initialized repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new `--show-ref-format` to git-rev-parse(1) that causes it
to print the ref format used by a repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new GIT_TEST_DEFAULT_REF_FORMAT environment variable that
lets developers run the test suite with a different default ref format
without impacting the ref format used by non-test Git invocations. This
is modeled after GIT_TEST_DEFAULT_OBJECT_FORMAT, which does the same
thing for the repository's object format.
Adapt the setup of the `REFFILES` test prerequisite to be conditionally
set based on the default ref format.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new GIT_DEFAULT_REF_FORMAT environment variable that lets
users control the default ref format used by both git-init(1) and
git-clone(1). This is modeled after GIT_DEFAULT_OBJECT_FORMAT, which
does the same thing for the repository's object format.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "extensions.refStorage" extension that allows us to
specify the ref storage format used by a repository. For now, the only
supported format is the "files" format, but this list will likely soon
be extended to also support the upcoming "reftable" format.
There have been discussions on the Git mailing list in the past around
how exactly this extension should look like. One alternative [1] that
was discussed was whether it would make sense to model the extension in
such a way that backends are arbitrarily stackable. This would allow for
a combined value of e.g. "loose,packed-refs" or "loose,reftable", which
indicates that new refs would be written via "loose" files backend and
compressed into "packed-refs" or "reftable" backends, respectively.
It is arguable though whether this flexibility and the complexity that
it brings with it is really required for now. It is not foreseeable that
there will be a proliferation of backends in the near-term future, and
the current set of existing formats and formats which are on the horizon
can easily be configured with the much simpler proposal where we have a
single value, only.
Furthermore, if we ever see that we indeed want to gain the ability to
arbitrarily stack the ref formats, then we can adapt the current
extension rather easily. Given that Git clients will refuse any unknown
value for the "extensions.refStorage" extension they would also know to
ignore a stacked "loose,packed-refs" in the future.
So let's stick with the easy proposal for the time being and wire up the
extension.
[1]: <pull.1408.git.1667846164.gitgitgadget@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A limited number of tests require repositories to have the default
repository format or otherwise they would fail to run, e.g. because they
fail to detect the correct hash function. While the hash function is the
only extension right now that creates problems like this, we are about
to add a second extension for the ref format.
Introduce a new DEFAULT_REPO_FORMAT prereq that can easily be amended
whenever we add new format extensions. Next to making any such changes
easier on us, the prerequisite's name should also help to clarify the
intent better.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gives all paths builtin objectmode values based on the paths' modes
(one of 100644, 100755, 120000, 040000, 160000). Users may use
this feature to filter by file types. For example a pathspec such as
':(attr:builtin_objectmode=160000)' could filter for submodules without
needing to have `builtin_objectmode=160000` to be set in .gitattributes
for every submodule path.
These values are also reflected in `git check-attr` results.
If the git_attr_direction is set to GIT_ATTR_INDEX or GIT_ATTR_CHECKIN
and a path is not found in the index, the value will be unspecified.
This patch also reserves the builtin_* attribute namespace for objectmode
and any future builtin attributes. Any user defined attributes using this
reserved namespace will result in a warning. This is a breaking change for
any existing builtin_* attributes.
Pathspecs with some builtin_* attribute name (excluding builtin_objectmode)
will behave like any attribute where there are no user specified values.
Signed-off-by: Joanna Wang <jojwang@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory pool allocations that require a new block and would fill at
least half of it are handled specially. Before 158dfeff3d (mem-pool:
add life cycle management functions, 2018-07-02) they used to be
allocated outside of the pool. This patch made mem_pool_alloc() create
a bespoke block instead, to allow releasing it when the pool gets
discarded.
Unfortunately mem_pool_alloc() returns a pointer to the start of such a
bespoke block, i.e. to the struct mp_block at its top. When the caller
writes to it, the management information gets corrupted. This affects
mem_pool_discard() and -- if there are no other blocks in the pool --
also mem_pool_alloc().
Return the payload pointer of bespoke blocks, just like for smaller
allocations, to protect the management struct.
Also update next_free to mark the block as full. This is only strictly
necessary for the first allocated block, because subsequent ones are
inserted after the current block and never considered for further
allocations, but it's easier to just do it in all cases.
Add a basic unit test to demonstrate the issue by using
mem_pool_calloc() with a tiny block size, which forces the creation of a
bespoke block.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" has been prepared to allow cloning a repository with
non-default hash function into a repository that uses the reftable
backend.
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
"git fetch --atomic" issued an unnecessary empty error message,
which has been corrected.
* jx/fetch-atomic-error-message-fix:
fetch: no redundant error message for atomic fetch
t5574: test porcelain output of atomic fetch
The code to parse the From e-mail header has been updated to avoid
recursion.
* jk/mailinfo-iterative-unquote-comment:
mailinfo: avoid recursion when unquoting From headers
t5100: make rfc822 comment test more careful
Code clean-up for sanity checking of command line options for "git
show-ref".
* rs/show-ref-incompatible-options:
show-ref: use die_for_incompatible_opt3()
"git checkout -B <branch> [<start-point>]" allowed a branch that is
in use in another worktree to be updated and checked out, which
might be a bit unexpected. The rule has been tightened, which is a
breaking change. "--ignore-other-worktrees" option is required to
unbreak you, if you are used to the current behaviour that "-B"
overrides the safety.
* jc/checkout-B-branch-in-use:
checkout: forbid "-B <branch>" from touching a branch used elsewhere
checkout: refactor die_if_checked_out() caller
93851746 (parse-options: decouple "--end-of-options" and "--",
2023-12-06) updated the world order to make callers of parse-options
that set PARSE_OPT_KEEP_UNKNOWN_OPT responsible for deciding what to
do with "--end-of-options" they may see after parse_options() returns.
This made a previous bug in sparse-checkout more visible; namely,
that
git sparse-checkout [add|set] --[no-]cone --end-of-options ...
would simply treat "--end-of-options" as one of the paths to include in
the sparse-checkout. But this was already problematic before; namely,
git sparse-checkout [add|set| --[no-]cone --sikp-checks ...
would not give an error on the mis-typed "--skip-checks" but instead
simply treat "--sikp-checks" as a path or pattern to include in the
sparse-checkout, which is highly unfriendly.
This behavior began when the command was converted to parse-options in
7bffca95ea (sparse-checkout: add '--stdin' option to set subcommand,
2019-11-21). Back then it was just called KEEP_UNKNOWN. Later it was
renamed to KEEP_UNKNOWN_OPT in 99d86d60e5 (parse-options:
PARSE_OPT_KEEP_UNKNOWN only applies to --options, 2022-08-19) to clarify
that it was only about dashed options; we always keep non-option
arguments. Looking at that original patch, both Peff and I think that
the author was simply confused about the mis-named option, and really
just wanted to keep the non-option arguments. We never should have used
the flag all along (and the other cases were cargo-culted within the
file).
Remove the erroneous PARSE_OPT_KEEP_UNKNOWN_OPT flag now to fix this
bug. Note that this does mean that anyone who might have been using
git sparse-checkout [add|set] [--[no-]cone] --foo --bar
to request paths or patterns '--foo' and '--bar' will now have to use
git sparse-checkout [add|set] [--[no-]cone] -- --foo --bar
That makes sparse-checkout more consistent with other git commands,
provides users much friendlier error messages and behavior, and is
consistent with the all-caps warning in git-sparse-checkout.txt that
this command "is experimental...its behavior...will likely change". :-)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when we added this placeholder in a4ac106178 (cat-file: add
%(objectsize:disk) format atom, 2013-07-10), there were no tests,
claiming "[...]the exact numbers returned are volatile and subject to
zlib and packing decisions".
But we can use a little shell hackery to get the expected numbers
ourselves. To a certain degree this is just re-implementing what Git is
doing under the hood, but it is still worth doing. It makes sure we
exercise the %(objectsize:disk) code at all, and having the two
implementations agree gives us more confidence.
Note that our shell code assumes that no object appears twice (either in
two packs, or as both loose and packed), as then the results really are
undefined. That's OK for our purposes, and the test will notice if that
assumption is violated (the shell version would produce duplicate lines
that Git's output does not have).
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git archive --list blah" should notice an extra command line
parameter that goes unused. Make it so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
"git bisect reset" has been taught to clean up state files and refs
even when BISECT_START file is gone.
* jk/bisect-reset-fix:
bisect: always clean on reset
"git $cmd --end-of-options --rev -- --path" for some $cmd failed
to interpret "--rev" as a rev, and "--path" as a path. This was
fixed for many programs like "reset" and "checkout".
* jk/end-of-options:
parse-options: decouple "--end-of-options" and "--"
Clean-up code that handles combinations of incompatible options.
* rs/incompatible-options-messages:
worktree: simplify incompatibility message for --orphan and commit-ish
worktree: standardize incompatibility messages
clean: factorize incompatibility message
revision, rev-parse: factorize incompatibility messages about - -exclude-hidden
revision: use die_for_incompatible_opt3() for - -graph/--reverse/--walk-reflogs
repack: use die_for_incompatible_opt3() for -A/-k/--cruft
push: use die_for_incompatible_opt4() for - -delete/--tags/--all/--mirror
