Even though a Git commit object is designed to be capable of storing
any binary data as its payload, in practice people use it to describe
the changes in textual form, and tools like "git log" are designed to
treat the payload as text.
Detect and warn when we see any commit object with a NUL byte in
it.
Note that a NUL byte in the header part is already detected as a
grave error. This change is purely about the message part.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test in t6036 prepares a file whose contents contain these
lines:
<<<<<<< Temporary merge branch 1
C
=======
B
>>>>>>> Temporary merge branch 2
and uses recursive merge strategy to run criss-cross merge with it.
Manual merge resolution by users fundamentally depends on being able
to distinguish the tracked contents from the separator lines added
by "git merge" in order to allow users to tell which block of lines
came from where. You can deliberately craft a file with lines that
resemble conflict marker lines to make it impossible for the user
(the outer merge of merge-recursive counts as a user of the result
of "virtual parent" merge) to tell which part is which, and write a
test to demonstrate that with such a file that "git merge" cannot
fundamentally work well and has to fail.
It however is pointless and waste of time and resource to run such a
test that asserts the obvious.
In real life, people who do need to track files with such lines that
have <<<< ==== >>>> as their prefixes set the conflict-marker-size
attribute to make sure they will be able to tell between the tracked
lines that happen to begin with these (confusing) prefixes and the
marker lines that are added by "git merge".
Remove the test as pointless waste of resource.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary use of conflict markers is to help the user who resolves
the final (outer) merge by hand to show which part came from which
branch by separating the blocks of lines apart. When the conflicted
parts from a "virtual ancestor" merge created by merge-recursive
remains in the common ancestor part in the final result, however,
the conflict markers that are the same size as the final merge
become harder to see.
Increase the conflict marker size slightly for these inner merges so
that the markers from the final merge and cruft from internal merge
can be distinguished more easily.
This would help reduce the common issue that prevents "rerere" from
being used on a really complex conflict.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite the 'seq' imitation using only commands and features that
are typically found built into modern POSIX shells, instead of
relying on Perl to run a single-liner script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
88d50724 (am --skip: revert changes introduced by failed 3way merge,
2015-06-06), unlike all the other patches in the series, forgot to
quote the output from "$(git ls-files -u)" when using it as the
argument to "test -z", leading to a syntax error on platforms whose
test does not interpret "test -z" (no other arguments) as testing if
a string "-z" is the null string (which GNU test and test that is
built into bash and dash seem to do).
Note that $(git ls-files -u | wc -l) is deliberately left unquoted,
as some implementations of "wc -l" includes extra blank characters
in its output and cannot be compared as string, i.e. "test 0 = $(...)".
Signed-off-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never used the "letters" form since we came up with "test_seq" to
replace use of non-portable "seq" in our test script, which we
introduced it at d17cf5f3 (tests: Introduce test_seq, 2012-08-04).
We use this helper to either iterate for N times (i.e. the values on
the lines do not even matter), or just to get N distinct strings
(i.e. the values on the lines themselves do not really matter, but
we care that they are different from each other and reproducible).
Stop promising that we may allow using "letters"; this would open an
easier reimplementation that does not rely on $PERL, if somebody
later wants to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit 618310a taught t6302 to run without the GPG
prerequisite, it did so by conditionally creating the signed
tags only when gpg is available. As a result, further tests
need to take this into account, which they can do with the
test_prepare_expect helper. This is a minor hassle, though,
as the helper cannot easily cover all cases (it just matches
"signed" in the output, so all output must include the
actual refname).
Instead, let's take a different approach. We'll always
create the tags, and only conditionally sign them. This does
mean our tag-names are a minor lie, but it lets the tests
which do not care about signing easily behave the same in
all settings. We'll include a comment to document our lie
and avoid confusing further test-writers.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test uses the 'z' option, i.e. "compress the output while at
it", which is GNUism and not portable.
Reported-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test uses the 'z' option, i.e. "compress the output while at
it", which is GNUism and not portable.
Reported-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sed expression for IPv6, "Tested User And Host" or "tuah" used a wrong
sed expression, which doesn't work under all versions of sed.
Reported-By: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" reports the paths of submodules the command
recurses into, but this was incorrect when the command was not run
from the root level of the superproject.
* sb/submodule-path-misc-bugs:
t7407: make expectation as clear as possible
submodule update: test recursive path reporting from subdirectory
submodule update: align reporting path for custom command execution
submodule status: correct path handling in recursive submodules
submodule update --init: correct path handling in recursive submodules
submodule foreach: correct path display in recursive submodules
Move from unsigned char[20] to struct object_id continues.
* bc/object-id:
match-trees: convert several leaf functions to use struct object_id
tree-walk: convert tree_entry_extract() to use struct object_id
struct name_entry: use struct object_id instead of unsigned char sha1[20]
match-trees: convert shift_tree() and shift_tree_by() to use object_id
test-match-trees: convert to use struct object_id
sha1-name: introduce a get_oid() function
"git rebase -m" could be asked to rebase an entire branch starting
from the root, but failed by assuming that there always is a parent
commit to the first commit on the branch.
* bw/rebase-merge-entire-branch:
git-rebase--merge: don't include absent parent as a base
HTTP transport clients learned to throw extra HTTP headers at the
server, specified via http.extraHeader configuration variable.
* js/http-custom-headers:
http: support sending custom HTTP headers
The test scripts for "git p4" (but not "git p4" implementation
itself) has been updated so that they would work even on a system
where the installed version of Python is python 3.
* ld/p4-test-py3:
git-p4 tests: time_in_seconds should use $PYTHON_PATH
git-p4 tests: work with python3 as well as python2
git-p4 tests: cd to / before running python
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of having a whitelist of command-line config
options to pass to submodules was two-fold:
1. It prevented obvious nonsense like using core.worktree
for multiple repos.
2. It could prevent surprise when the user did not mean
for the options to leak to the submodules (e.g.,
http.sslverify=false).
For case 1, the answer is mostly "if it hurts, don't do
that". For case 2, we can note that any such example has a
matching inverted surprise (e.g., a user who meant
http.sslverify=true to apply everywhere, but it didn't).
So this whitelist is probably not giving us any benefit, and
is already creating a hassle as people propose things to put
on it. Let's just drop it entirely.
Note that we still need to keep a special code path for
"prepare the submodule environment", because we still have
to take care to pass through $GIT_CONFIG_PARAMETERS (and
block the rest of the repo-specific environment variables).
We can do this easily from within the submodule shell
script, which lets us drop the submodule--helper option
entirely (and it's OK to do so because as a "--" program, it
is entirely a private implementation detail).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion in [1] pointed out that '.' is a faulty suggestion as
there is a corner case where it fails:
> "submodule deinit ." may have "worked" in the sense that you would
> have at least one path in your tree and avoided this "nothing
> matches" most of the time. It would have still failed with the
> exactly same error if run in an empty repository, i.e.
>
> $ E=/var/tmp/x/empty && rm -fr "$E" && mkdir -p "$E" && cd "$E"
> $ git init
> $ rungit v2.6.6 submodule deinit .
> error: pathspec '.' did not match any file(s) known to git.
> Did you forget to 'git add'?
> $ >file && git add file
> $ rungit v2.6.6 submodule deinit .
> $ echo $?
> 0
So instead of a pathspec add the '--all' option to deinit all submodules
and add a test to check for the corner case of an empty repository.
The code only needs to learn about the '--all' option and doesn't
require further changes as `git submodule--helper list "$@"` will list
all submodules when "$@" is empty.
[1] http://news.gmane.org/gmane.comp.version-control.git/289535
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the fake "editor" store output of grep in a file so that we can
see how many diffs were contained in the message and use them in
individual tests where ever it is required. A subsequent commit will
introduce scenarios where it is important to be able to exactly
determine how many diffs were present.
The fake "editor" is always made to succeed regardless of whether grep
found diff headers or not so that we don't have to use 'test_must_fail'
for which 'test_line_count = 0' is an easy substitute and also helps in
maintaining the consistency.
Also use write_script() to create the fake "editor".
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_COUNTUP() merely increments the counter upon --option, and resets it
to 0 upon --no-option, which means that there is no "unspecified" value
with which a client can initialize the counter to determine whether or
not --[no]-option was seen at all.
Make OPT_COUNTUP() treat any negative number as an "unspecified" value
to address this shortcoming. In particular, if a client initializes the
counter to -1, then if it is still -1 after parse_options(), then
neither --option nor --no-option was seen; if it is 0, then --no-option
was seen last, and if it is 1 or greater, than --option was seen last.
This change does not affect the behavior of existing clients because
they all use the initial value of 0 (or more).
Note that builtin/clean.c initializes the variable used with
OPT__FORCE (which uses OPT_COUNTUP()) to a negative value, but it is set
to either 0 or 1 by reading the configuration before the code calls
parse_options(), i.e. as far as parse_options() is concerned, the
initial value of the variable is not negative.
To test this behavior, in test-parse-options.c, "verbose" is set to
"unspecified" while quiet is set to 0 which will test the new behavior
with all sets of values.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-commit and git-status share the same implementation thus it is
necessary to ensure that changes specific to git-commit don't
accidentally impact git-status.
This test verifies that changes made to verbose in git-commit does not
impact git-status.
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include tests to check for multiple levels of quiet and to check the
behavior of '--no-quiet'.
Include tests to check for multiple levels of verbose and to check the
behavior of '--no-verbose'.
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if there is an empty directory where we look for the loose version
of a reference, check for a packed reference before giving up. This
fixes the failing test that was introduced two commits ago.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Add some tests checking that it is possible to work with a reference
even if there is an empty directory where the loose ref would be stored.
One of the new tests demonstrates a bug that has been with us since at
least 2.5.0--single reference lookup gives up when it sees the
directory, even if the reference exists as a packed ref. This probably
hasn't been reported before because Git usually cleans up empty
directories when packing references.
This bug will be fixed shortly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe --contains" often made a hard-to-justify choice of
tag to give name to a given commit, because it tried to come up
with a name with smallest number of hops from a tag, causing an old
commit whose close descendant that is recently tagged were not
described with respect to an old tag but with a newer tag. It did
not help that its computation of "hop" count was further tweaked to
penalize being on a side branch of a merge. The logic has been
updated to favor using the tag with the oldest tagger date, which
is a lot easier to explain to the end users: "We describe a commit
in terms of the (chronologically) oldest tag that contains the
commit."
* js/name-rev-use-oldest-ref:
name-rev: include taggerdate in considering the best name
"git p4" learned to record P4 jobs in Git commit that imports from
the history in Perforce.
* jd/p4-jobs-in-commit:
git-p4: add P4 jobs to git commit message
git-p4: clean-up code style in tests
The test runs `chmod 0` on a file to test a case where Git fails to
read it, but that would not work if it is run as root.
Reported-by: Jan Keromnes <janx@linux.com>
Fix-proposed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ba3c69a9 (commit: teach --gpg-sign option, 2011-10-05) introduced a
"signed commit" by teaching the --[no]-gpg-sign option and the
commit.gpgsign configuration variable to various commands that
create commits.
Teaching these to "git commit" and "git merge", both of which are
end-user facing Porcelain commands, was perfectly fine. Allowing
the plumbing "git commit-tree" to suddenly change the behaviour to
surprise the scripts by paying attention to commit.gpgsign was not.
Among the in-tree scripts, filter-branch, quiltimport, rebase and
stash are the commands that run "commit-tree". If any of these
wants to allow users to always sign every single commit, they should
offer their own configuration (e.g. "filterBranch.gpgsign") with an
option to disable signing (e.g. "git filter-branch --no-gpgsign").
Ignoring commit.gpgsign option _obviously_ breaks the backward
compatibility, but it is easy to follow the standard pattern in
scripts to honor whatever configuration variable they choose to
follow. E.g.
case $(git config --bool commit.gpgsign) in
true) sign=-S ;;
*) sign= ;;
esac &&
git commit-tree $sign ...whatever other args...
Do so to make sure that "git rebase" keeps paying attention to the
configuration variable, which unfortunately is a documented mistake.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reroute the output of stdout to stderr as it is just informative
messages, not to be consumed by machines.
This should not regress any scripts that try to parse the
current output, as the output is already internationalized
and therefore unstable.
We want to init submodules from the helper for `submodule update`
in a later patch and the stdout output of said helper is consumed
by the parts of `submodule update` which are still written in shell.
So we have to be careful which messages are on stdout.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit" misbehaved in a few minor ways when an empty message
is given via -m '', all of which has been corrected.
* ad/commit-have-m-option:
commit: do not ignore an empty message given by -m ''
commit: --amend -m '' silently fails to wipe message
A partial rewrite of "git submodule" in the 2.7 timeframe changed
the way the gitdir: pointer in the submodules point at the real
repository location to use absolute paths by accident. This has
been corrected.
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
A change back in version 2.7 to "git branch" broke display of a
symbolic ref in a non-standard place in the refs/ hierarchy (we
expect symbolic refs to appear in refs/remotes/*/HEAD to point at
the primary branch the remote has, and as .git/HEAD to point at the
branch we locally checked out).
* jk/branch-shortening-funny-symrefs:
branch: fix shortening of non-remote symrefs
When "git worktree" feature is in use, "git branch -m" renamed a
branch that is checked out in another worktree without adjusting
the HEAD symbolic ref for the worktree.
* ky/branch-m-worktree:
set_worktree_head_symref(): fix error message
branch -m: update all per-worktree HEADs
refs: add a new function set_worktree_head_symref
When "git worktree" feature is in use, "git branch -d" allowed
deletion of a branch that is checked out in another worktree
* ky/branch-d-worktree:
branch -d: refuse deleting a branch which is currently checked out
The last test added to 't5510-fetch' in 0898c96281 (fetch: release
pack files before garbage-collecting, 2016-01-13) may sporadically
trigger following error message from the test harness:
rm: cannot remove 'trash directory.t5510-fetch/auto-gc/.git': Directory not empty
The test in question forces an auto-gc, which, if the system supports
it, runs in the background by default, and occasionally takes long
enough for the test to finish and for 'test_done' to start
housekeeping. This can lead to the test's 'git gc --auto' in the
background and 'test_done's 'rm -rf $trash' in the foreground racing
each other to create and delete files and directories. It might just
happen that 'git gc' re-creates a directory that 'rm -rf' already
visited and removed, which ultimately triggers the above error.
Disable detaching the auto-gc process to ensure that it finishes
before the test can continue, thus avoiding this racy situation.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git blame $path" with unnormalized data in the index
for the path, the data in the working tree was blamed, even though
"git add" would not have changed what is already in the index, due
to "safe crlf" that disables the line-end conversion. It has been
corrected.
* tb/blame-force-read-cache-to-workaround-safe-crlf:
correct blame for files commited with CRLF
"git send-pack --all <there>" was broken when its command line
option parsing was written in the 2.6 timeframe.
* sk/send-pack-all-fix:
git-send-pack: fix --all option when used with directory
"git diff -M" used to work better when two originally identical
files A and B got renamed to X/A and X/B by pairing A to X/A and B
to X/B, but this was broken in the 2.0 timeframe.
* sg/diff-multiple-identical-renames:
diffcore: fix iteration order of identical files during rename detection
Unify internal logic between "git tag -v" and "git verify-tag"
commands by making one directly call into the other.
* st/verify-tag:
tag -v: verify directly rather than exec-ing verify-tag
verify-tag: move tag verification code to tag.c
verify-tag: prepare verify_tag for libification
verify-tag: update variable name and type
t7030: test verifying multiple tags
builtin/verify-tag.c: ignore SIGPIPE in gpg-interface
"git push" from a corrupt repository that attempts to push a large
number of refs deadlocked; the thread to relay rejection notices
for these ref updates blocked on writing them to the main thread,
after the main thread at the receiving end notices that the push
failed and decides not to read these notices and return a failure.
* jk/push-client-deadlock-fix:
t5504: drop sigpipe=ok from push tests
fetch-pack: isolate sigpipe in demuxer thread
send-pack: isolate sigpipe in demuxer thread
run-command: teach async threads to ignore SIGPIPE
send-pack: close demux pipe before finishing async process
"git mv old new" did not adjust the path for a submodule that lives
as a subdirectory inside old/ directory correctly.
* sb/mv-submodule-fix:
mv: allow moving nested submodules
Sources to many test helper binaries (and the generated helpers)
have been moved to t/helper/ subdirectory to reduce clutter at the
top level of the tree.
* nd/test-helpers:
test helpers: move test-* to t/helper/ subdirectory
Makefile: clean *.o files we create
