"git commit --allow-empty --only" (no pathspec) with dirty index
ought to be an acceptable way to create a new commit that does not
change any paths, but it was forbidden, perhaps because nobody
needed it so far.
* ak/commit-only-allow-empty:
commit: remove 'Clever' message for --only --amend
commit: make --only --allow-empty work without paths
Update the error messages from the dumb-http client when it fails
to obtain loose objects; we used to give sensible error message
only upon 404 but we now forbid unexpected redirects that needs to
be reported with something sensible.
* jk/http-walker-limit-redirect:
http-walker: complain about non-404 loose object errors
http: treat http-alternates like redirects
http: make redirects more obvious
remote-curl: rename shadowed options variable
http: always update the base URL for redirects
http: simplify update_url_from_redirect
There are some "gray areas" around when to omit braces from
a conditional or loop body. Since that seems to have
resulted in some arguments, let's be a little more clear
about our preferred style.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that a relative pathname for diff.orderFile is interpreted as
relative to the top-level work directory.
Signed-off-by: Richard Hansen <hansenr@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
37cd4f7 ("Document git-gui, git-citool as mainporcelain manual pages",
2007-06-21) documented the default, but was shortly followed by c52c945
("git-gui: Allow blame/browser subcommands on bare repositories",
2007-07-17) which, it would appear, as a side effect, removed that default.
Finally document that change.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the 'git gui' information regarding the graphical browser
and its upstream location.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following part of the description:
git bisect (bad|new) [<rev>]
git bisect (good|old) [<rev>...]
may be a bit confusing, as a reader may wonder if instead it should be:
git bisect (bad|good) [<rev>]
git bisect (old|new) [<rev>...]
Of course the difference between "[<rev>]" and "[<rev>...]" should hint
that there is a good reason for the way it is.
But we can further clarify and complete the description by adding
"<term-new>" and "<term-old>" to the "bad|new" and "good|old"
alternatives.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `user-manual.txt` is designed as a `book` but the `Makefile` wants
to build it as an `article`. This seems to be a problem when building
the documentation with `asciidoctor`. Furthermore the parts *Git
Glossary* and *Appendix B* had no subsections which is not allowed when
building with `asciidoctor`. So lets add a *dummy* section.
Signed-off-by: 마누엘 <nalla@hamal.uberspace.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the `git submodule update` command, repeats itself
for each update option, "This is done when <option> is given, or no
option is given and `submodule.<name>.update` is set to <string>.
Avoid these repetitive clauses by stating the command line options take
precedence over configured options.
Also add 'none' to the list of options instead of mentioning it in the
following running text and split the list into two parts, one that is
accessible via the command line and one that is only reachable via the
configuration variables.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading up on a subcommand of `git submodule <subcommand>`,
it is convenient to have its options nearby and not just at the
top of the man page. Add the options to each subcommand.
While at it, also document the `--checkout` option for `update`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --inter-hunk-context= option was added in commit 6d0e674a57
("diff: add option to show context between close hunks"). This patch
allows configuring a default for this option.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'versionsort.prereleaseSuffix' configuration variable, as its name
suggests, is supposed to only deal with tagnames with prerelease
suffixes, and allows sorting those prerelease tags in a user-defined
order before the suffixless main release tag, instead of sorting them
simply lexicographically.
However, the previous changes in this series resulted in an
interesting and useful property of version sort:
- The empty string as a configured suffix matches all tagnames,
including tagnames without any suffix, but
- tagnames containing a "real" configured suffix are still ordered
according to that real suffix, because any longer suffix takes
precedence over the empty string.
Exploiting this property we can easily generalize suffix reordering
and specify the order of tags with given suffixes not only before but
even after a main release tag by using the empty suffix to denote the
position of the main release tag, without any algorithm changes:
$ git -c versionsort.prereleaseSuffix=-alpha \
-c versionsort.prereleaseSuffix=-beta \
-c versionsort.prereleaseSuffix="" \
-c versionsort.prereleaseSuffix=-gamma \
-c versionsort.prereleaseSuffix=-delta \
tag -l --sort=version:refname 'v3.0*'
v3.0-alpha1
v3.0-beta1
v3.0
v3.0-gamma1
v3.0-delta1
Since 'versionsort.prereleaseSuffix' is not a fitting name for a
configuration variable to control this more general suffix reordering,
introduce the new variable 'versionsort.suffix'. Still keep the old
configuration variable name as a deprecated alias, though, to avoid
suddenly breaking setups already using it. Ignore the old variable if
both old and new configuration variables are set, but emit a warning
so users will be aware of it and can fix their configuration. Extend
the documentation to describe and add a test to check this more
general behavior.
Note: since the empty suffix matches all tagnames, tagnames with
suffixes not included in the configuration are listed together with
the suffixless main release tag, ordered lexicographically right after
that, i.e. before tags with suffixes listed in the configuration
following the empty suffix.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new submodule helper "git submodule embedgitdirs" to make it
easier to move embedded .git/ directory for submodules in a
superproject to .git/modules/ (and point the latter with the former
that is turned into a "gitdir:" file) has been added.
* sb/submodule-embed-gitdir:
worktree: initialize return value for submodule_uses_worktrees
submodule: add absorb-git-dir function
move connect_work_tree_and_git_dir to dir.h
worktree: check if a submodule uses worktrees
test-lib-functions.sh: teach test_commit -C <dir>
submodule helper: support super prefix
submodule: use absolute path for computing relative path connecting
"git diff" and its family had two experimental heuristics to shift
the contents of a hunk to make the patch easier to read. One of
them turns out to be better than the other, so leave only the
"--indent-heuristic" option and remove the other one.
* jc/retire-compaction-heuristics:
diff: retire "compaction" heuristics
Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* jc/abbrev-autoscale-config:
config.abbrev: document the new default that auto-scales
When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
An improvement counterproposal has failed.
cf. <20161114194049.mktpsvgdhex2f4zv@sigill.intra.peff.net>
* dt/smart-http-detect-server-going-away:
upload-pack: optionally allow fetching any sha1
remote-curl: don't hang when a server dies before any output
The "--" argument avoids "ambiguous argument: unknown revision or
path not in the working tree" errors when a pathname argument refers
to a non-existent file.
The "--" passed explicitly to set was removed because rev-parse
outputs the "--" argument that it is given.
Signed-off-by: Richard Hansen <hansenr@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when we use the 'lstrip=<N>' option, if 'N' is greater than
the number of components available in the refname, we abruptly end
program execution by calling die().
This behavior is undesired since a single refname with few components
could end program execution. To avoid this, return an empty string
whenever the value 'N' is greater than the number of components
available, instead of calling die().
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the upcoming patch, where we introduce the 'rstrip'
option. Rename the 'strip' option to 'lstrip' to remove ambiguity.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the recently introduced refname_atom_parser_internal() within
remote_ref_atom_parser(), this provides a common base for all the ref
printing atoms, allowing %(upstream) and %(push) to also use the
':strip' option.
The atoms '%(push)' and '%(upstream)' will retain the ':track' and
':trackshort' atom modifiers to themselves as they have no meaning in
context to the '%(refname)' and '%(symref)' atoms.
Update the documentation and tests to reflect the same.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using refname_atom_parser_internal(), introduce refname_atom_parser()
which will parse the %(symref) and %(refname) atoms. Store the parsed
information into the 'used_atom' structure based on the modifiers used
along with the atoms.
Now the '%(symref)' atom supports the ':strip' atom modifier. Update the
Documentation and tests to reflect this.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for %(upstream:track,nobracket) which will print the
tracking information without the brackets (i.e. "ahead N, behind M").
This is needed when we port branch.c to use ref-filter's printing APIs.
Add test and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrowing from branch.c's implementation print "[gone]" whenever an
unknown upstream ref is encountered instead of just ignoring it.
This makes sure that when branch.c is ported over to using ref-filter
APIs for printing, this feature is not lost.
Make changes to t/t6300-for-each-ref.sh and
Documentation/git-for-each-ref.txt to reflect this change.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Helped-by : Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for %(objectname:short=<length>) which would print the
abbreviated unique objectname of given length. When no length is
specified, the length is 'DEFAULT_ABBREV'. The minimum length is
'MINIMUM_ABBREV'. The length may be exceeded to ensure that the
provided object name is unique.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Helped-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement %(if:equals=<string>) wherein the if condition is only
satisfied if the value obtained between the %(if:...) and %(then) atom
is the same as the given '<string>'.
Similarly, implement (if:notequals=<string>) wherein the if condition
is only satisfied if the value obtained between the %(if:...) and
%(then) atom is different from the given '<string>'.
This is done by introducing 'if_atom_parser()' which parses the given
%(if) atom and then stores the data in used_atom which is later passed
on to the used_atom of the %(then) atom, so that it can do the required
comparisons.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement %(if), %(then) and %(else) atoms. Used as
%(if)...%(then)...%(end) or %(if)...%(then)...%(else)...%(end). If the
format string between %(if) and %(then) expands to an empty string, or
to only whitespaces, then the whole %(if)...%(end) expands to the string
following %(then). Otherwise, it expands to the string following
%(else), if any. Nesting of this construct is possible.
This is in preparation for porting over `git branch -l` to use
ref-filter APIs for printing.
Add documentation and tests regarding the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all callers of the old 'get_pathspec' interface have been
migrated to use the new pathspec struct interface it can be removed
from the codebase.
Since there are no more users of the '_raw' field in the pathspec struct
it can also be removed. This patch also removes the old functionality
of modifying the const char **argv array that was passed into
parse_pathspec. Instead the constructed 'match' string (which is a
pathspec element with the prefix prepended) is only stored in its
corresponding pathspec_item entry.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "giteveryday" document has a callout list that contains a code
block. This is not a problem for AsciiDoc, but AsciiDoctor sadly was
explicitly designed *not* to render this correctly [*1*]. The symptom is
an unhelpful
line 322: callout list item index: expected 1 got 12
line 325: no callouts refer to list item 1
line 325: callout list item index: expected 2 got 13
line 327: no callouts refer to list item 2
In Git for Windows, we rely on the speed improvement of AsciiDoctor (on
this developer's machine, `make -j15 html` takes roughly 30 seconds with
AsciiDoctor, 70 seconds with AsciiDoc), therefore we need a way to
render this correctly.
The easiest way out is to simplify the callout list, as suggested by
AsciiDoctor's author, even while one may very well disagree with him
that a code block hath no place in a callout list.
*1*: https://github.com/asciidoctor/asciidoctor/issues/1478
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 crashes when used with a very old p4 client version
that does not support the '-r <number>' option in its commands.
Allow making git-p4 work with old p4 clients by setting git-p4.retries to 0.
Alternatively git-p4.retries could be made opt-in.
But since only very old, barely maintained p4 versions don't support
the '-r' option, the setting-retries-to-0 workaround would do.
The "-r retries" option is present in Perforce 2012.2 Command Reference,
but absent from Perforce 2012.1 Command Reference.
Signed-off-by: Igor Kushnir <igorkuo@gmail.com>
Acked-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git shortlog" learned "--committer" option to group commits by
committer, instead of author.
* lt/shortlog-by-committer:
t4201: make tests work with and without the MINGW prerequiste
shortlog: test and document --committer option
shortlog: group by committer information
Finer-grained control of what protocols are allowed for transports
during clone/fetch/push have been enabled via a new configuration
mechanism.
* bw/transport-protocol-policy:
http: respect protocol.*.allow=user for http-alternates
transport: add from_user parameter to is_transport_allowed
http: create function to get curl allowed protocols
transport: add protocol policy config option
http: always warn if libcurl version is too old
lib-proto-disable: variable name fix
"git merge --continue" has been added as a synonym to "git commit"
to conclude a merge that has stopped due to conflicts.
* cp/merge-continue:
merge: mark usage error strings for translation
merge: ensure '--abort' option takes no arguments
completion: add --continue option for merge
merge: add '--continue' option as a synonym for 'git commit'
When a patch inserts a block of lines, whose last lines are the
same as the existing lines that appear before the inserted block,
"git diff" can choose any place between these existing lines as the
boundary between the pre-context and the added lines (adjusting the
end of the inserted block as appropriate) to come up with variants
of the same patch, and some variants are easier to read than others.
We have been trying to improve the choice of this boundary, and Git
2.11 shipped with an experimental "compaction-heuristic". Since
then another attempt to improve the logic further resulted in a new
"indent-heuristic" logic. It is agreed that the latter gives better
result overall, and the former outlived its usefulness.
Retire "compaction", and keep "indent" as an experimental feature.
The latter hopefully will be turned on by default in a future
release, but that should be done as a separate step.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We somehow forgot to update the "default is 7" in the
documentation. Also give a way to explicitly ask the auto-scaling
by setting config.abbrev to "auto".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach grep to recursively search in submodules when provided with a
<tree> object. This allows grep to search a submodule based on the state
of the submodule that is present in a commit of the super project.
When grep is provided with a <tree> object, the name of the object is
prefixed to all output. In order to provide uniformity of output
between the parent and child processes the option `--parent-basename`
has been added so that the child can preface all of it's output with the
name of the parent's object instead of the name of the commit SHA1 of
the submodule. This changes output from the command
`git grep -e. -l --recurse-submodules HEAD` from:
HEAD:file
<commit sha1 of submodule>:sub/file
to:
HEAD:file
HEAD:sub/file
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow grep to recognize submodules and recursively search for patterns in
each submodule. This is done by forking off a process to recursively
call grep on each submodule. The top level --super-prefix option is
used to pass a path to the submodule which can in turn be used to
prepend to output or in pathspec matching logic.
Recursion only occurs for submodules which have been initialized and
checked out by the parent project. If a submodule hasn't been
initialized and checked out it is simply skipped.
In order to support the existing multi-threading infrastructure in grep,
output from each child process is captured in a strbuf so that it can be
later printed to the console in an ordered fashion.
To limit the number of theads that are created, each child process has
half the number of threads as its parents (minimum of 1), otherwise we
potentailly have a fork-bomb.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update to receive-pack to make it easier to drop garbage
objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot
have a pathname with a colon in it (no surprise!), and this in turn
made it impossible to push into a repository at such a path. This
has been fixed by introducing a quoting mechanism used when
appending such a path to the colon-separated list.
* jk/quote-env-path-list-component:
t5615-alternate-env: double-quotes in file names do not work on Windows
t5547-push-quarantine: run the path separator test on Windows, too
tmp-objdir: quote paths we add to alternates
alternates: accept double-quoted paths
* kh/tutorial-grammofix:
doc: omit needless "for"
doc: make the intent of sentence clearer
doc: add verb in front of command to run
doc: add articles (grammar)
"git rebase" learned "--quit" option, which allows a user to
remove the metadata left by an earlier "git rebase" that was
manually aborted without using "git rebase --abort".
* nd/rebase-forget:
rebase: add --quit to cleanup rebase, leave everything else untouched
