Fetching via protocol v0 over Smart HTTP transport sometimes failed
to correctly auto-follow tags.
* jk/fetch-auto-tag-following-fix:
transport-helper: re-examine object dir after fetching
The labels on conflict markers for the common ancestor, our version,
and the other version are available to custom 3-way merge driver
via %S, %X, and %Y placeholders.
* ad/custom-merge-placeholder-for-symbolic-pathnames:
merge-ll: expose revision names to custom drivers
Tests on ref API are moved around to prepare for reftable.
* jc/reffiles-tests:
t5312: move reffiles specific tests to t0601
t4202: move reffiles specific tests to t0600
t3903: make drop stash test ref backend agnostic
t1503: move reffiles specific tests to t0600
t1415: move reffiles specific tests to t0601
t1410: move reffiles specific tests to t0600
t1406: move reffiles specific tests to t0600
t1405: move reffiles specific tests to t0601
t1404: move reffiles specific tests to t0600
t1414: convert test to use Git commands instead of writing refs manually
remove REFFILES prerequisite for some tests in t1405 and t2017
t3210: move to t0601
The "disable repository discovery of a bare repository" check,
triggered by setting safe.bareRepository configuration variable to
'explicit', has been loosened to exclude the ".git/" directory inside
a non-bare repository from the check. So you can do "cd .git &&
git cmd" to run a Git command that works on a bare repository without
explicitly specifying $GIT_DIR now.
* kl/allow-working-in-dot-git-in-non-bare-repository:
setup: allow cwd=.git w/ bareRepository=explicit
"git archive --remote=<remote>" learned to talk over the smart
http (aka stateless) transport.
* jx/remote-archive-over-smart-http:
transport-helper: call do_take_over() in process_connect
transport-helper: call do_take_over() in connect_helper
http-backend: new rpc-service for git-upload-archive
transport-helper: protocol v2 supports upload-archive
remote-curl: supports git-upload-archive service
transport-helper: no connection restriction in connect_helper
All conditional "advice" messages show how to turn them off, which
becomes repetitive. Setting advice.* configuration explicitly on
now omits the instruction part.
* rj/advice-disable-how-to-disable:
advice: allow disabling the automatic hint in advise_if_enabled()
"git diff --no-rename A B" did not disable rename detection but did
not trigger an error from the command line parser.
* rs/parse-options-with-keep-unknown-abbrev-fix:
parse-options: simplify positivation handling
parse-options: fully disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
Rename detection logic ignored the final line of a file if it is an
incomplete line.
* en/diffcore-delta-final-line-fix:
diffcore-delta: avoid ignoring final 'line' of file
Update to a new feature recently added, "git show-ref --exists".
* tc/show-ref-exists-fix:
builtin/show-ref: treat directory as non-existing in --exists
Tighten URL checks fsck makes in a URL recorded for submodules.
* vd/fsck-submodule-url-test:
submodule-config.c: strengthen URL fsck check
t7450: test submodule urls
test-submodule: remove command line handling for check-name
submodule-config.h: move check_submodule_url
When $HOME/.gitignore is missing but XDG config file available, we
should write into the latter, not former. "git gc" and "git
maintenance" wrote into a wrong "global config" file, which have
been corrected.
* kh/maintenance-use-xdg-when-it-should:
maintenance: use XDG config if it exists
config: factor out global config file retrieval
config: rename global config function
config: format newlines
A few tests to "git commit -o <pathspec>" and "git commit -i
<pathspec>" has been added.
* gt/test-commit-o-i-options:
t7501: add tests for --amend --signoff
t7501: add tests for --include and --only
CI for GitLab learned to drive macOS jobs.
* ps/gitlab-ci-macos:
ci: add macOS jobs to GitLab CI
ci: make p4 setup on macOS more robust
ci: handle TEST_OUTPUT_DIRECTORY when printing test failures
Makefile: detect new Homebrew location for ARM-based Macs
t7527: decrease likelihood of racing with fsmonitor daemon
Completion update to prepare for reftable
* ps/completion-with-reftable-fix:
completion: treat dangling symrefs as existing pseudorefs
completion: silence pseudoref existence check
completion: improve existence check for pseudo-refs
t9902: verify that completion does not print anything
completion: discover repo path in `__git_pseudoref_exists ()`
Tweak a few tests not to manually modify the reference database
(hence easier to work with other backends like reftable).
* jt/tests-with-reftable:
t5541: remove lockfile creation
t1401: remove lockfile creation
Custom merge drivers need access to the names of the revisions they
are working on, so that the merge conflict markers they introduce
can refer to those revisions. The placeholders '%S', '%X' and '%Y'
are introduced to this end.
Signed-off-by: Antonin Delpeuch <antonin@delpeuch.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes a bug where fetch over http (or any helper) using the
v0 protocol may sometimes fail to auto-follow tags. The bug comes from
61c7711cfe (sha1-file: use loose object cache for quick existence check,
2018-11-12). But to explain why (and why this is the right fix), let's
take a step back.
After fetching a pack, the object database has changed, but we may still
hold in-memory caches that are now out of date. Traditionally this was
just the packed_git list, but 61c7711cfe started using a loose-object
cache, as well.
Usually these caches are invalidated automatically. When an expected
object cannot be found, the low-level object lookup routines call
reprepare_packed_git(), which re-scans the set of packs (and thanks to
some preparatory patches ahead of 61c7711cfe, throws away the loose
object cache). But not all calls do this! In some cases we expect that
the object might not exist, and pass OBJECT_INFO_QUICK to tell the
low-level routines not to bother re-scanning. And the tag auto-following
code is one such caller, since we are asking about oids that the other
side has (but we might not have locally).
To deal with this, we explicitly call reprepare_packed_git() ourselves
after fetching a pack; this goes all the way back to 48ec3e5c07
(Incorporate fetched packs in future object traversal, 2008-06-15). But
that only helps if we call fetch_pack() in the main fetch process. When
we're using a transport helper, it happens in a separate sub-process,
and the parent process is left with old values. So this is only a
problem with protocols which require a separate helper process (like
http).
This patch fixes it by teaching the parent process in the transport
helper relationship to make that same reprepare call after the helper
finishes fetching.
You might be left with some lingering questions, like:
1. Why only the v0 protocol, and not v2? It's because in v2 the child
helper doesn't actually run fetch_pack(); it merely establishes a
tunnel over which the main process can talk to the remote side (so
the fetch_pack() and reprepare happen in the main process).
2. Wouldn't we have the same bug even before the 61c7711cfe added
the loose object cache? For example, when we store the fetch as a
pack locally, wouldn't our packed_git list still be out of date?
If we store a pack, everything works because other parts of the
fetch process happen to trigger a call to reprepare_packed_git().
In particular, before storing whatever ref was originally
requested, we'll make sure we have the pointed-to object, and that
call happens without the QUICK flag. So in that case we'll see that
we don't know about it, reprepare, and then repeat our lookup. And
now we _do_ know about the pack, and further calls with QUICK will
find its contents.
Whereas when we unpack the result into loose objects, we never get
that same invalidation trigger. We didn't have packs before, and we
don't after. But when we do the loose object lookup, we find the
object. There's no way to realize that we didn't have the object
before the pack, and that having it now means things have changed
(in theory we could do a superfluous cache lookup to see that it
was missing from the old cache; but depending on the tags the other
side showed us, we might not even have filled in that part of the
cache earlier).
3. Why does the included test use "--depth 1"? This is important
because without it, we happen to invalidate the cache as a side
effect of other parts of the fetch process. What happens in a
non-shallow fetch is something like this:
1. we call find_non_local_tags() once before actually getting the
pack, to see if there are any tags we can fill in from what we
already have. This fills in the cache (which is obviously
missing objects we're about to fetch).
2. before fetching the actual pack, fetch_and_consume_refs()
calls check_exist_and_connected(), to see if we even need to
fetch a pack at all. This doesn't use QUICK (though arguably
it could, as it's purely an optimization). And since it sees
there are objects we are indeed missing, that triggers a
reprepare_packed_git() call, which throws out the loose object
cache.
3. after fetching, now we call find_non_local_tags() again. And
since step (2) invalidated our loose object cache, we find
the new objects and create the tags.
So everything works, but mostly due to luck. Whereas in a fetch
with --depth, we skip step 2 entirely, and thus the out-of-date
cache is still in place for step 3, giving us the wrong answer.
So the test works with a small "--depth 1" fetch, which makes sure that
we don't store the pack from the other side, and that we don't trigger
the accidental cache invalidation. And of course it forces the use of
v0 along with using the http protocol.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move a few tests into t0601 since they specifically test the packed-refs
file and thus are specific to the reffiles backend.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move two tests into t0600 since they write loose reflog refs manually
and thus are specific to the reffiles backend.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this test, the calls to cut(1) are only used to verify that the
contents of the reflog entry look as expected. By replacing these with
git-reflog(1) calls, we can make this test ref-backend agnostic.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move this test to t0600 with other reffiles specific tests since it
checks for loose refs and is specific to the reffiles backend.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move this test into t0601 with other reffiles pack-refs specific tests
since it checks for individual loose refs and thus is specific to the
reffiles backend.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move these tests to t0600 with other reffiles specific tests since they
do things like take a lock on an individual ref, and write directly into
the reflog refs.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move this test to t0600 with the rest of the tests that are specific to
reffiles. This test reaches into reflog directories manually, and so are
specific to reffiles.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move this test to t0601 with other reffiles specific pack-refs tests
since it is reffiles specific in that it looks into the loose refs
directory for an assertion.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests modify loose refs manually and are specific to the reffiles
backend. Move these to t0600 to be part of a test suite of reffiles
specific tests.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test can be re-written to use Git commands rather than writing a
manual ref in the reflog. This way this test no longer needs the
REFFILES prerequisite.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests are compatible with the reftable backend and thus do not
need the REFFILES prerequisite. Even though 53af25e4
(t1405: mark test that checks existence as REFFILES, 2022-01-31) and
53af25e4 (t1405: mark test that checks existence as REFFILES,
2022-01-31) marked these tests to require REFFILES, the reftable backend
in its current state does indeed work with these tests.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move t3210 to t0601, since these tests are reffiles specific in that
they modify loose refs manually. This is part of the effort to
categorize these tests together based on the ref backend they test. When
we upstream the reftable backend, we can add more tests to t06xx. This
way, all tests that test specific ref backend behavior will be grouped
together.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test fails in the GitHub Actions CI pipeline, we mark it up using
special GitHub syntax so it stands out when looking at the run log. We
also mark up "fixed" test cases, and skip passing tests since we want to
concentrate on the failures.
The finalize_test_case_output function in
test-lib-github-workflow-markup.sh which performs this markup is however
missing a fourth case: "broken" tests, i.e. tests using
'test_expect_failure' to document a known bug. This leads to these
"broken" tests appearing along with any failed tests, potentially
confusing the reader who might not be aware that "broken" is the status
for 'test_expect_failure' tests that indeed failed, and wondering what
their commits "broke".
Also skip these "broken" tests so that only failures and fixed tests
stand out.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After successfully connecting to the smart transport by calling
process_connect_service() in connect_helper(), run do_take_over() to
replace the old vtable with a new one which has methods ready for the
smart transport connection. This fixes the exit code of git-archive
in test case "archive remote http repository" of t5003.
The connect_helper() function is used as the connect method of the
vtable in "transport-helper.c", and it is called by transport_connect()
in "transport.c" to setup a connection. The only place that we call
transport_connect() so far is in "builtin/archive.c". Without running
do_take_over(), it may fail to call transport_disconnect() in
run_remote_archiver() of "builtin/archive.c". This is because for a
stateless connection and a service like "git-upload-archive", the
remote helper may receive a SIGPIPE signal and exit early. Call
do_take_over() to have a graceful disconnect method, so that we still
call transport_disconnect() even if the remote helper exits early.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new rpc-service "upload-archive" in http-backend to add server side
support for remote archive over HTTP/HTTPS protocols.
Also add new test cases in t5003. In the test case "archive remote http
repository", git-archive exits with a non-0 exit code even though we
create the archive correctly. It will be fixed in a later commit.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The safe.bareRepository setting can be set to 'explicit' to disallow
implicit uses of bare repositories, preventing an attack [1] where an
artificial and malicious bare repository is embedded in another git
repository. Unfortunately, some tooling uses myrepo/.git/ as the cwd
when executing commands, and this is blocked when
safe.bareRepository=explicit. Blocking is unnecessary, as git already
prevents nested .git directories.
Teach git to not reject uses of git inside of the .git directory: check
if cwd is .git (or a subdirectory of it) and allow it even if
safe.bareRepository=explicit.
[1] https://github.com/justinsteven/advisories/blob/main/2022_git_buried_bare_repos_and_fsmonitor_various_abuses.md
Signed-off-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exit code of the preceding command in a pipe is disregarded. So
if that preceding command is a Git command that fails, the test would
not fail. Instead, by saving the output of that Git command to a file,
and removing the pipe, we make sure the test will fail if that Git
command fails.
Signed-off-by: Achu Luma <ach.lumap@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
baa4adc66a (parse-options: disable option abbreviation with
PARSE_OPT_KEEP_UNKNOWN, 2019-01-27) turned off support for abbreviated
options when the flag PARSE_OPT_KEEP_UNKNOWN is given, as any shortened
option could also be an abbreviation for one of the unknown options.
The code for handling abbreviated options is guarded by an if, but it
can also be reached via goto. baa4adc66a only blocked the first way.
Add the condition to the other ones as well.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0024 has multiple command invocations on a single line, which
goes against the style described in CodingGuidelines, thus fix
that.
Also, use the -C flag to give the destination when using $TAR,
therefore, not requiring a subshell.
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace pipe with redirection operator '>' to store the output
to a temporary file after 'git archive' command since the pipe
will swallow the command's exit code and a crash won't
necessarily be noticed.
Also fix an unwanted space after redirection '>' to match the
style described in CodingGuidelines.
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" learned to pay attention to "fetch.all" configuration
variable, which pretends as if "--all" was passed from the command
line when no remote parameter was given.
* tb/fetch-all-configuration:
fetch: add new config option fetch.all
Update the validation of "curl URL" submodule URLs (i.e. those that specify
an "http[s]" or "ftp[s]" protocol) in 'check_submodule_url()' to catch more
invalid URLs. The existing validation using 'credential_from_url_gently()'
parses certain URLs incorrectly, leading to invalid submodule URLs passing
'git fsck' checks. Conversely, 'url_normalize()' - used to validate remote
URLs in 'remote_get()' - correctly identifies the invalid URLs missed by
'credential_from_url_gently()'.
To catch more invalid cases, replace 'credential_from_url_gently()' with
'url_normalize()' followed by a 'url_decode()' and a check for newlines
(mirroring 'check_url_component()' in the 'credential_from_url_gently()'
validation).
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to 't7450-bad-git-dotfiles.sh' to check the validity of different
submodule URLs. To verify this directly (without setting up test
repositories & submodules), add a 'check-url' subcommand to 'test-tool
submodule' that calls 'check_submodule_url' in the same way that
'check-name' calls 'check_submodule_name'.
Add two tests to separately address cases where the URL check correctly
filters out invalid URLs and cases where the check misses invalid URLs. Mark
the latter ("url check misses invalid cases") with 'test_expect_failure' to
indicate that this is currently broken, which will be fixed in the next step.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hash_chars() would hash lines to integers, and store them in a spanhash,
but cut lines at 64 characters. Thus, whenever it reached 64 characters
or a newline, it would create a new spanhash. The problem is, the final
part of the file might not end 64 characters after the previous 'line'
and might not end with a newline. This could, for example, cause an
85-byte file with 12 lines and only the first character in the file
differing to appear merely 23% similar rather than the expected 97%.
Ensure the last line is included, and add a testcase that would have
caught this problem.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git maintenance register` registers the repository in the user's global
config. `$XDG_CONFIG_HOME/git/config` is supposed to be used if
`~/.gitconfig` does not exist. However, this command creates a
`~/.gitconfig` file and writes to that one even though the XDG variant
exists.
This used to work correctly until 50a044f1e4 (gc: replace config
subprocesses with API calls, 2022-09-27), when the command started calling
the config API instead of git-config(1).
Also change `unregister` accordingly.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t7527, we test that the builtin fsmonitor daemon works well in
various edge cases. One of these tests is frequently failing because
events reported by the fsmonitor--daemon are missing an expected event.
This failure is essentially a race condition: we do not wait for the
daemon to flush out all events before we ask it to quit. Consequently,
it can happen that we miss some expected events.
In other testcases we counteract this race by sending a simple query to
the daemon. Quoting a comment:
We run a simple query after modifying the filesystem just to introduce
a bit of a delay so that the trace logging from the daemon has time to
get flushed to disk.
Now this workaround is not a "proper" fix as we do not wait for all
events to have been synchronized in a deterministic way. But this fix
seems to be sufficient for all the other tests to pass, so it must not
be all that bad.
Convert the failing test to do the same. While the test was previously
failing in about 50% of the test runs, I couldn't reproduce the failure
after the change anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9080a7f178 (builtin/show-ref: add new mode to check for reference
existence, 2023-10-31) added the option --exists to git-show-ref(1).
When you use this option against a ref that doesn't exist, but it is
a parent directory of an existing ref, you get the following error:
$ git show-ref --exists refs/heads
error: failed to look up reference: Is a directory
when the ref-files backend is in use. To be more clear to user,
hide the error about having found a directory. What matters to the
user is that the named ref does not exist. Instead, print the same
error as when the ref was not found:
error: reference does not exist
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'check-name' subcommand to 'test-tool submodule' is documented as being
able to take a command line argument '<name>'. However, this does not work -
and has never worked - because 'argc > 0' triggers the usage message in
'cmd__submodule_check_name()'. To simplify the helper and avoid future
confusion around proper use of the subcommand, remove any references to
command line arguments for 'check-name' in usage strings and handling in
'check_name()'.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
