Currently,
- Running "index-pack --promisor" outside a repo segfaults.
- It may be confusing to a user that running "index-pack --promisor"
within a repo may make changes to the repo's object DB, especially
since the packs indexed by the index-pack invocation may not even be
related to the repo.
As discussed in [1] and [2], teaching --promisor to forbid a packfile
name solves both these problems. This combination of arguments requires
a repo (since we are writing the resulting .pack and .idx to it) and it
is clear that the files are related to the repo.
Currently, Git uses "index-pack --promisor" only when fetching into
a repo, so it could be argued that we should teach "index-pack" a
new argument (say, "--fetching-mode") instead of tying --promisor to
a generic argument like the packfile name. However, this --promisor
feature could conceivably be used whenever we have a packfile that is
known to come from the promisor remote (whether obtained through Git's
fetch protocol or through other means) so not using a new argument seems
reasonable - one could envision a user-made script obtaining a packfile
and then running "index-pack --promisor --stdin", for example. In fact,
it might be possible to relax the restriction further (say, by also
allowing --promisor when indexing a packfile that is in the object DB),
but relaxing the restriction is backwards-compatible so we can revisit
that later.
One thing to watch out for is the possibility of a future Git feature
that indexes a pack in the context of a repo, but does not necessarily
write the resulting pack to it (and does not necessarily desire to
make any changes to the object DB). One such feature would be fetch
quarantine, which might need the repo context in order to detect
hash collisions, but would also need to ensure that the object DB
is undisturbed in case the fetch fails for whatever reason, even if
the reason occurs only after the indexing is complete. It may not be
obvious to the implementer of such a feature that "index-pack" could
sometimes write packs other than the indexed pack to the object DB,
but there are already other ways that "fetch" could write to the object
DB (in particular, packfile URIs and bundle URIs), so hopefully the
implementation of this future feature would already include a test that
the object DB be undisturbed.
This change requires the change to t5300 by 1f52cdfacb (index-pack:
document and test the --promisor option, 2022-03-09) to be undone.
(--promisor is already tested indirectly, so we don't need the explicit
test here any more.)
[1] https://lore.kernel.org/git/20241114005652.GC1140565@coredump.intra.peff.net/
[2] https://lore.kernel.org/git/20241119185345.GB15723@coredump.intra.peff.net/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach index-pack to, when processing the objects in a pack with
--promisor specified on the CLI, repack local objects (and the local
objects that they refer to, recursively) referenced by these objects
into promisor packs.
This prevents the situation in which, when fetching from a promisor
remote, we end up with promisor objects (newly fetched) referring
to non-promisor objects (locally created prior to the fetch). This
situation may arise if the client had previously pushed objects to the
remote, for example. One issue that arises in this situation is that,
if the non-promisor objects become inaccessible except through promisor
objects (for example, if the branch pointing to them has moved to
point to the promisor object that refers to them), then GC will garbage
collect them. There are other ways to solve this, but the simplest
seems to be to enforce the invariant that we don't have promisor objects
referring to non-promisor objects.
This repacking is done from index-pack to minimize the performance
impact. During a fetch, the only time most objects are fully inflated
in memory is when their object ID is computed, so we also scan the
objects (to see which objects they refer to) during this time.
Also to minimize the performance impact, an object is calculated to be
local if it's a loose object or present in a non-promisor pack. (If it's
also in a promisor pack or referred to by an object in a promisor pack,
it is technically already a promisor object. But a misidentification
of a promisor object as a non-promisor object is relatively benign
here - we will thus repack that promisor object into a promisor pack,
duplicating it in the object store, but there is no correctness issue,
just an issue of inefficiency.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git notes add' and 'git notes append' a new '-e' flag,
instructing them to open the note in $GIT_EDITOR before saving.
* sa/notes-edit:
notes: teach the -e option to edit messages in editor
Documentation update to clarify that 'uploadpack.allowAnySHA1InWant'
implies both 'allowTipSHA1InWant' and 'allowReachableSHA1InWant'.
* ps/upload-pack-doc:
doc: document how uploadpack.allowAnySHA1InWant impact other allow options
An extra worktree attached to a repository points at each other to
allow finding the repository from the worktree and vice versa
possible. Turn this linkage to relative paths.
* cw/worktree-relative:
worktree: add test for path handling in linked worktrees
worktree: link worktrees with relative paths
worktree: refactor infer_backlink() to use *strbuf
worktree: repair copied repository and linked worktrees
“Trailer” is the preferred nomenclature in this project. Also add a
definite article where I think it makes sense.
As we can see the rest of the document already prefers this term. This
just gets rid of the last stragglers.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
These two commands are similar enough to acknowledge each other on their
documentation pages.
See the previous commit where we discussed that option-less update-ref
does not support updating symbolic refs but symbolic-ref does.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add a paragraph which just emphasizes that the command without any
options does not support refs in the final arguments. This is clear
already from the names `<new-oid>` and `<old-oid>` but the right balance
of redundancy makes documentation robust against stray interpretation.
This is also a good place to mention why `--stdin` has those `symref-*`
commands.
Suggested-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This paragraph interrupts the flow of the section by going into detail
about what a symbolic ref file is and how it is implemented. It is not
clear what the purpose is since symbolic refs were already mentioned
prior (“possibly dereferencing the symbolic refs”). Worse, it can
confuse the reader about what argument can be a symbolic ref since it
just says “it” and not which of the parameters; in turn the reader can
be lead to try `<new-oid>` and then get a confusing error since
update-ref will just say that it is not a valid SHA1.
gitglossary(7) already documents what a symref is, concretely, and quite
well at that.
Reported-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Move the discussion of file system symbolic links to a new “Notes”
section (inspired by the one in git-symbolic-ref(1)) since this is
mostly of historical note at this point, not something that is needed in
the main section of the documentation.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Remove paragraphs which explain that using this command is safer than
echoing the branch name into `HEAD`.
Evoking the echo strategy is wrong now under the reftable backend since
this file does not exist. And the ref file backend majority user base
use porcelain commands to manage `HEAD` unless they are intentionally
poking at the implementation.
Maybe this warning was relevant for the usage patterns when it was
added[1] but now it just takes up space.
† 1: 129056370a (Add missing documentation., 2005-10-04)
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The other paragraphs on options say “With <option>,”. Let’s be uniform.
Also add missing word “that”.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Used regex to find these typos:
(?<!struct )(?<=\s)([a-z]{1,}) \1(?=\s)
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Notes can be added to a commit using:
- "-m" to provide a message on the command line.
- -C to copy a note from a blob object.
- -F to read the note from a file.
When these options are used, Git does not open an editor,
it simply takes the content provided via these options and
attaches it to the commit as a note.
Improve flexibility to fine-tune the note before finalizing it
by allowing the messages to be prefilled in the editor and edited
after the messages have been provided through -[mF].
Signed-off-by: Abraham Samuel Adekunle <abrahamadekunle50@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Document how setting of `uploadpack.allowAnySHA1InWant`
influences other `uploadpack` options - `allowTipSHA1InWant`
and `allowReachableSHA1InWant`.
Signed-off-by: Piotr Szlazak <piotr.szlazak@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
A new configuration variable remote.<name>.serverOption makes the
transport layer act as if the --serverOption=<value> option is
given from the command line.
* xx/remote-server-option-config:
ls-remote: leakfix for not clearing server_options
fetch: respect --server-option when fetching multiple remotes
transport.c:🤝 make use of server options from remote
remote: introduce remote.<name>.serverOption configuration
transport: introduce parse_transport_option() method
Discussing the desire to make breaking changes, declaring that
breaking changes are made at a certain version boundary, and
recording these decisions in this document, are necessary but not
sufficient. We need to make sure that we can implement, test, and
deploy such impactful changes.
Earlier we considered to guard the breaking changes with a run-time
check of the `feature.git<version>` configuration to allow brave
users and developers to opt into them as early adoptors. But the
engineering cost to support such a run-time switch, covering new and
disappearing git subcommands and how "git help" would adjust the
documentation to the run-time switch, would be unrealistically high
to be worth it.
Formalize the mechanism based on a compile-time switch to allow
early adopters to opt into the breaking change in a version of Git
before the planned version for the breaking change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc update to clarify how periodical maintenance are scheduled,
spread across time to avoid thundering hurds.
* sk/doc-maintenance-schedule:
doc: add a note about staggering of maintenance
The way AsciiDoc is used for SYNOPSIS part of the manual pages has
been revamped. The sources, at least for the simple cases, got
vastly pleasant to work with.
* ja/doc-synopsis-markup:
doc: apply synopsis simplification on git-clone and git-init
doc: update the guidelines to reflect the current formatting rules
doc: introduce a synopsis typesetting
We can only check out commits or branches, not refs in general. And the
problem here is if another worktree is using the branch that we want to
check out.
Let’s be more direct and just talk about branches instead of refs.
Also replace “be held” with “in use”. Further, “in use” is not
restricted to a branch being checked out (e.g. the branch could be busy
on a rebase), hence generalize to “or otherwise in use” in the option
description.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explicitly avoid saying "ref <src>" when introducing the source
side of a refspec, because it can be a fully-spelled hexadecimal
object name, and it also can be a pattern that is not quite a "ref".
But we are loose when we introduce <dst> and say "ref <dst>", even
though it can also be a pattern. Let's omit "ref" also from the
destination side.
Clarify that <src> can be a ref, a (limited glob) pattern, or an
object name.
Even though the very original design of refspec expected that '*'
was used only at the end (e.g., "refs/heads/*" was expected, but not
"refs/heads/*-wip"), the code and its use evolved to handle a single
'*' anywhere in the pattern. Update the text to remove the mention
of "the same prefix". Anything that matches the pattern are named
by such a (limited glob) pattern in <src>.
Also put a bit more stress on the fact that we accept only one '*'
in the pattern by saying "one and only one `*`".
Helped-by: Monika Kairaitytė <monika@kibit.lt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
• Provide a commit message in the example command.
The command will hang since it is waiting for a commit message on
stdin. Which is usable but not straightforward enough since this is
example code.
• Use `||` directly since that is more straightforward than checking the
last exit status.
Also use `echo` and `exit` since `die` is not defined.
• Expose variable declarations.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis for `git config unset` mentions two positional arguments:
`<name>` and `<value>`. While the first argument is correct, the second
is not. Users are expected to provide the value via `--value=<value>`.
Remove the positional argument. The `--value=<value>` option is already
documented correctly, so this is all we need to do to fix the
documentation.
Signed-off-by: Josh Heinrichs <joshiheinrichs@gmail.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Utilize the `server_options` from the corresponding remote during the
handshake in `transport.c` when Git protocol v2 is detected. This helps
initialize the `server_options` in `transport.h:transport` if no server
options are set for the transport (typically via `--server-option` or
`-o`).
While another potential place to incorporate server options from the
remote is in `transport.c:transport_get`, setting server options for a
transport using a protocol other than v2 could lead to unexpected errors
(see `transport.c:die_if_server_options`).
Relevant tests and documentation have been updated accordingly.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, server options for Git protocol v2 can only be specified via
the command line option "--server-option" or "-o", which is inconvenient
when users want to specify a list of default options to send. Therefore,
we are introducing a new configuration to hold a list of default server
options, akin to the `push.pushOption` configuration for push options.
Initially, I named the new configuration `fetch.serverOption` to align
with `push.pushOption`. However, after discussing with Patrick, it was
renamed to `remote.<name>.serverOption` as suggested, because:
1. Server options are designed to be server-specific, making it more
logical to use a per-remote configuration.
2. Using "fetch." prefixed configurations in git-clone or git-ls-remote
seems out of place and inconsistent in design.
The parsing logic for `remote.<name>.serverOption` also relies on
`transport.c:parse_transport_option`, similar to `push.pushOption`, and
they follow the same priority design:
1. Server options set in lower-priority configuration files (e.g.,
/etc/gitconfig or $HOME/.gitconfig) can be overridden or unset in
more specific repository configurations using an empty string.
2. Command-line specified server options take precedence over those from
the configuration.
Server options from configuration are stored to the corresponding
`remote.h:remote` as a new field `server_options`. The field will be
utilized in the subsequent commit to help initialize the
`server_options` of `transport.h:transport`.
And documentation have been updated accordingly.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Liu Zhongbo <liuzhongbo.6666@bytedance.com>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These links should point to `.html` files, not to `.txt` ones.
Compare also to 4945f046c7 (api docs: link to html version of
api-trace2, 2022-09-16).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
