During interactive rebase, using 'drop' on a merge commit lead to
an error, which was incorrect.
* js/rebase-i-allow-drop-on-a-merge:
rebase -i: permit 'drop' of a merge commit
4c063c82e9 (rebase -i: improve error message when picking merge,
2024-05-30) added advice texts for cases when a merge commit is
passed as argument of sequencer command that cannot operate with
a merge commit. However, it forgot about the 'drop' command, so
that in this case the BUG() in the default branch is reached.
Handle 'drop' like 'merge', i.e., permit it without a message.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_set_multivar_in_file_gently()`. All callsites are adjusted
so that they use
`repo_config_set_multivar_in_file_gently(the_repository, ...)` instead.
While some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_set_in_file_gently()`. All callsites are adjusted so that
they use `repo_config_set_in_file_gently(the_repository, ...)` instead.
While some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_int()`. All
callsites are adjusted so that they use
`repo_config_get_int(the_repository, ...)` instead. While some callsites
might already have a repository available, this mechanical conversion is
the exact same as the current situation and thus cannot cause any
regression. Those sites should eventually be cleaned up in a later patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_string()`.
All callsites are adjusted so that they use
`repo_config_get_string(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up around object access API.
* ps/object-store:
odb: rename `read_object_with_reference()`
odb: rename `pretend_object_file()`
odb: rename `has_object()`
odb: rename `repo_read_object_file()`
odb: rename `oid_object_info()`
odb: trivial refactorings to get rid of `the_repository`
odb: get rid of `the_repository` when handling submodule sources
odb: get rid of `the_repository` when handling the primary source
odb: get rid of `the_repository` in `for_each()` functions
odb: get rid of `the_repository` when handling alternates
odb: get rid of `the_repository` in `odb_mkstemp()`
odb: get rid of `the_repository` in `assert_oid_type()`
odb: get rid of `the_repository` in `find_odb()`
odb: introduce parent pointers
object-store: rename files to "odb.{c,h}"
object-store: rename `object_directory` to `odb_source`
object-store: rename `raw_object_store` to `object_database`
Rename `oid_object_info()` to `odb_read_object_info()` as well as their
`_extended()` variant to match other functions related to the object
database and our modern coding guidelines.
Introduce compatibility wrappers so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In sequencer.c, caller only pass TODO_SQUASH or TODO_FIXUP to
update_squash_messages(), any other command passed in should be
considered as BUG. Replace `return error('unknown command')`
with `BUG('not a FIXUP or SQUASH')`.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefix '#' to the commit title in the "rebase -i" todo file, just
like a merge commit being replayed.
* en/sequencer-comment-messages:
sequencer: make it clearer that commit descriptions are just comments
Assorted fixes for issues found with CodeQL.
* js/misc-fixes:
sequencer: stop pretending that an assignment is a condition
bundle-uri: avoid using undefined output of `sscanf()`
commit-graph: avoid using stale stack addresses
trace2: avoid "futile conditional"
Avoid redundant conditions
fetch: avoid unnecessary work when there is no current branch
has_dir_name(): make code more obvious
upload-pack: rename `enum` to reflect the operation
commit-graph: avoid malloc'ing a local variable
fetch: carefully clear local variable's address after use
commit: simplify code
Code cleanup.
* jk/oidmap-cleanup:
raw_object_store: drop extra pointer to replace_map
oidmap: add size function
oidmap: rename oidmap_free() to oidmap_clear()
Every once in a while, users report that editing the commit summaries
in the todo list does not get reflected in the rebase operation,
suggesting that users are (a) only using one-line commit messages, and
(b) not understanding that the commit summaries are merely helpful
comments to help them find the right hashes.
It may be difficult to correct users' poor commit messages, but we can
at least try to make it clearer that the commit summaries are not
directives of some sort by inserting a comment character. Hopefully
that leads to them looking a little further and noticing the hints at
the bottom to use 'reword' or 'edit' directives.
Yes, this change may look funny at first since it hardcodes '#' rather
than using comment_line_str. However:
* comment_line_str exists to allow disambiguation between lines in
a commit message and lines that are instructions to users editing
the commit message. No such disambiguation is needed for these
comments that occur on the same line after existing directives
* the exact "comment" character(s) on regular pick lines used aren't
actually important; I could have used anything, including completely
random variable length text for each line and it'd work because we
ignore everything after 'pick' and the hash.
* The whole point of this change is to signal to users that they
should NOT be editing any part of the line after the hash (and if
they do so, their edits will be ignored), while the whole point of
comment_line_str is to allow highly flexible editing. So making
it more general by using comment_line_str actually feels
counterproductive.
* The character for merge directives absolutely must be '#'; that
has been deeply hardcoded for a long time (see below), and will
break if some other comment character is used instead. In a
desire to have pick and merge directives be similar, I use the
same comment character for both.
* Perhaps merge directives could be fixed to not be inflexible about
the comment character used, if someone feels highly motivated, but
I think that should be done in a separate follow-on patch.
Here are (some of?) the locations where '#' has already been hardcoded
for a long time for merges:
1) In check_label_or_ref_arg():
case TODO_LABEL:
/*
* '#' is not a valid label as the merge command uses it to
* separate merge parents from the commit subject.
*/
2) In do_merge():
/*
* For octopus merges, the arg starts with the list of revisions to be
* merged. The list is optionally followed by '#' and the oneline.
*/
merge_arg_len = oneline_offset = arg_len;
for (p = arg; p - arg < arg_len; p += strspn(p, " \t\n")) {
if (!*p)
break;
if (*p == '#' && (!p[1] || isspace(p[1]))) {
3) In label_oid():
if ((buf->len == the_hash_algo->hexsz &&
!get_oid_hex(label, &dummy)) ||
(buf->len == 1 && *label == '#') ||
hashmap_get_from_hash(&state->labels,
strihash(label), label)) {
/*
* If the label already exists, or if the label is a
* valid full OID, or the label is a '#' (which we use
* as a separator between merge heads and oneline), we
* append a dash and a number to make it unique.
*/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In sequencer.c:todo_list_rearrange_squash, if it fails, memory
allocated in `next`, `tail`, `subjects` and `subject2item` will leak.
Jump to cleanup label before return could fix this leak problem.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 3e81bccdf3 (sequencer: factor out todo command name parsing,
2019-06-27), a `return` statement was introduced that basically was a
long sequence of conditions, combined with `&&`, except for the last
condition which is not really a condition but an assignment.
The point of this construct was to return 1 (i.e. `true`) from the
function if all of those conditions held true, and also assign the `bol`
pointer to the end of the parsed command.
Some static analyzers are really unhappy about such constructs. And
human readers are at least puzzled, if not confused, by seeing a single
`=` inside a chain of conditions where they would have expected to see
`==` instead and, based on experience, immediately suspect a typo.
Let's help all of this by turning this into the more verbose, more
readable form of an `if` construct that both assigns the pointer as well
as returns 1 if all of the conditions hold true.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function does not free the oidmap struct itself; it just drops all
items from the map (using hashmap_clear_() internally). It should be
called oidmap_clear(), per CodingGuidelines.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been reported that "git rebase --rebase-merges" can create
corrupted reflog entries like
e9c962f2ea0 HEAD@{8}: <binary>�: Merged in <branch> (pull request #4441)
This is due to a use-after-free bug that happens because
reflog_message() uses a static `struct strbuf` and is not called to
update the current reflog message stored in `ctx->reflog_message` when
creating the merge. This means `ctx->reflog_message` points to a stale
reflog message that has been freed by subsequent call to
reflog_message() by a command such as `reset` that used the return value
directly rather than storing the result in `ctx->reflog_message`.
Fix this by creating the reflog message nearer to where the commit is
created and storing it in a local variable which is passed as an
additional parameter to run_git_commit() rather than storing the message
in `struct replay_ctx`. This makes it harder to forget to call
`reflog_message()` before creating a commit and using a variable with a
narrower scope means that a stale value cannot carried across a from one
iteration of the loop to the next which should prevent any similar
use-after-free bugs in the future.
A existing test is modified to demonstrate that merges are now created
with the correct reflog message.
Reported-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commit these functions will be called from pick_one_commit()
so move them above that function to avoid a forward declaration.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ps/object-file-cleanup:
object-store: merge "object-store-ll.h" and "object-store.h"
object-store: remove global array of cached objects
object: split out functions relating to object store subsystem
object-file: drop `index_blob_stream()`
object-file: split up concerns of `HASH_*` flags
object-file: split out functions relating to object store subsystem
object-file: move `xmmap()` into "wrapper.c"
object-file: move `git_open_cloexec()` to "compat/open.c"
object-file: move `safe_create_leading_directories()` into "path.c"
object-file: move `mkdir_in_gitdir()` into "path.c"
Remove remnants of the recursive merge strategy backend, which was
superseded by the ort merge strategy.
* en/merge-recursive-debug:
builtin/{merge,rebase,revert}: remove GIT_TEST_MERGE_ALGORITHM
tests: remove GIT_TEST_MERGE_ALGORITHM and test_expect_merge_algorithm
merge-recursive.[ch]: thoroughly debug these
merge, sequencer: switch recursive merges over to ort
sequencer: switch non-recursive merges over to ort
merge-ort: enable diff-algorithms other than histogram
builtin/merge-recursive: switch to using merge_ort_generic()
checkout: replace merge_trees() with merge_ort_nonrecursive()
The object layer has been updated to take an explicit repository
instance as a parameter in more code paths.
* ps/object-wo-the-repository:
hash: stop depending on `the_repository` in `null_oid()`
hash: fix "-Wsign-compare" warnings
object-file: split out logic regarding hash algorithms
delta-islands: stop depending on `the_repository`
object-file-convert: stop depending on `the_repository`
pack-bitmap-write: stop depending on `the_repository`
pack-revindex: stop depending on `the_repository`
pack-check: stop depending on `the_repository`
environment: move access to "core.bigFileThreshold" into repo settings
pack-write: stop depending on `the_repository` and `the_hash_algo`
object: stop depending on `the_repository`
csum-file: stop depending on `the_repository`
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `safe_create_leading_directories()` function and its relatives are
located in "object-file.c", which is not a good fit as they provide
generic functionality not related to objects at all. Move them into
"path.c", which already hosts `safe_create_dir()` and its relative
`safe_create_dir_in_gitdir()`.
"path.c" is free of `the_repository`, but the moved functions depend on
`the_repository` to read the "core.sharedRepository" config. Adapt the
function signature to accept a repository as argument to fix the issue
and adjust callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More precisely, replace calls to merge_recursive() with
merge_ort_recursive().
Also change t7615 to quit calling out recursive; it is not needed
anymore, and we are in fact using ort now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The do_recursive_merge() function, which is somewhat misleadingly named
since its purpose in life is to do a *non*-recursive merge, had code to
allow either using the recursive or ort backends. The default has been
ort for a very long time, let's just remove the code path for allowing
the recursive backend to be selected.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the compiler/linker cannot verify that an assert() invocation is
free of side effects for us (e.g. because the assertion includes some
kind of function call), replace the use of assert() with ASSERT().
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebase rewords a commit it picks the commit and then runs "git
commit --amend" to reword it. When the commit is picked the sequencer
tries to reuse existing commits by fast-forwarding if the parents are
unchanged. Rewording an empty commit that has been fast-forwarded fails
because "git commit --amend" is called without "--allow-empty". This
happens because when a commit is fast-forwarded the logic that checks
whether we should pass "--allow-empty" is skipped. Fix this by always
passing "--allow-empty" when rewording a commit. This is safe because we
are amending a commit that has already been picked so if it had become
empty when it was picked we'd have already returned an error.
As "git commit" will happily create empty merge commits without
"--allow-empty" we do not need to pass that flag when rewording merge
commits.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase todo editor has commands like `fixup -c` which affects
the commit messages of the rebased commits.[1] For example:
pick hash1 <msg>
fixup hash2 <msg>
fixup -c hash3 <msg>
This says that hash2 and hash3 should be squashed into hash1 and
that hash3’s commit message should be used for the resulting commit.
So the user is presented with an editor where the two first commit
messages are commented out and the third is not. However this does
not work if `core.commentChar`/`core.commentString` is in use since
the comment char is hardcoded (#) in this `sequencer.c` function.
As a result the first commit message will not be commented out.
† 1: See 9e3cebd97c (rebase -i: add fixup [-C | -c] command,
2021-01-29)
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Co-authored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reported-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git revert --reference <commit>` leaves behind a comment in the
first line:[1]
# *** SAY WHY WE ARE REVERTING ON THE TITLE LINE ***
Meaning that the commit will just consist of the next line if the user
exits the editor directly:
This reverts commit <--format=reference commit>
But the comment char here is hardcoded (#). Which means that the
comment line will inadvertently be included in the commit message if
`core.commentChar`/`core.commentString` is in use.
† 1: See 43966ab315 (revert: optionally refer to commit in the
"reference" format, 2022-05-26)
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rebase --update-ref` does not insert commands for dependent/sub-
branches which are checked out.[1] Instead it leaves a comment about
that fact. The comment char is hardcoded (#). In turn the comment
line gets interpreted as an invalid command when `core.commentChar`/
`core.commentString` is in use.
† 1: See 900b50c242 (rebase: add --update-refs option, 2022-07-19)
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow passing flags when setting up a transaction such that the
behaviour of the transaction itself can be altered. This functionality
will be used in a subsequent patch.
Adapt callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When interactively rebasing merge commits, the commit message is parsed to
extract a probably meaningful label name. For instance if the merge commit
is “Merge branch 'feature0'”, then the rebase script will have thes lines:
```
label feature0
merge -C $sha feature0 # “Merge branch 'feature0'
```
This heuristic fails in the case of octopus merges or when the merge commit
message is actually unrelated to the parent commits.
An example that combines both is:
```
*---. 967bfa4 (HEAD -> integration) Integration
|\ \ \
| | | * 2135be1 (feature2, feat2) Feature 2
| |_|/
|/| |
| | * c88b01a Feature 1
| |/
|/|
| * 75f3139 (feat0) Feature 0
|/
* 25c86d0 (main) Initial commit
```
yields the labels Integration, Integration-2 and Integration-3.
Fix this by using a branch name for each merge commit's parent that is the
tip of at least one branch, and falling back to a label derived from the
merge commit message otherwise.
In the example above, the labels become feat0, Integration and feature2.
Signed-off-by: Nicolas Guichard <nicolas@guichard.eu>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract load_branch_decorations from todo_list_add_update_ref_commands so
it can be re-used in make_script_with_merges.
Since it can now be called multiple times, use non-static lists and place
it next to load_ref_decorations to re-use the decoration_loaded guard.
Signed-off-by: Nicolas Guichard <nicolas@guichard.eu>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use of API functions that implicitly depend on the_repository
object in the config subsystem has been rewritten to pass a
repository object through the callchain.
* ps/config-wo-the-repository:
config: hide functions using `the_repository` by default
global: prepare for hiding away repo-less config functions
config: don't depend on `the_repository` with branch conditions
config: don't have setters depend on `the_repository`
config: pass repo to functions that rename or copy sections
config: pass repo to `git_die_config()`
config: pass repo to `git_config_get_expiry_in_days()`
config: pass repo to `git_config_get_expiry()`
config: pass repo to `git_config_get_max_percent_split_change()`
config: pass repo to `git_config_get_split_index()`
config: pass repo to `git_config_get_index_threads()`
config: expose `repo_config_clear()`
config: introduce missing setters that take repo as parameter
path: hide functions using `the_repository` by default
path: stop relying on `the_repository` in `worktree_git_path()`
path: stop relying on `the_repository` when reporting garbage
hooks: remove implicit dependency on `the_repository`
editor: do not rely on `the_repository` for interactive edits
path: expose `do_git_common_path()` as `repo_common_pathv()`
path: expose `do_git_path()` as `repo_git_pathv()`
rebase --exec doesn't obey --quiet and ends up printing messages about
the command being executed:
git rebase HEAD~3 --quiet --exec true
Executing: true
Executing: true
Executing: true
Let's fix that by omitting the "Executing" messages when using --quiet.
Furthermore, the sequencer code includes a few calls to
term_clear_line(), which prints a special character sequence to erase
the previous line displayed on stderr (even when nothing was printed
yet). For an user running the command interactively, the net effect of
calling this function with or without --quiet is the same as the
characters are invisible in the terminal. However, when redirecting the
output to a file or piping to another command, the presence of these
invisible characters is noticeable, and it may break user expectation as
--quiet is not being respected.
We could skip the term_clear_line() calls when --quiet is used, like we
are doing with the "Executing" messages, but it makes much more sense to
condition the line cleaning upon stderr being TTY, since these
characters are really only useful for TTY outputs.
The added test checks for both these two changes.
Reported-by: Lincoln Yuji <lincolnyuji@hotmail.com>
Reported-by: Rodrigo Siqueira <siqueirajordao@riseup.net>
Signed-off-by: Matheus Tavares <matheus.tavb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're not releasing the `todo_list` in `sequencer_pick_revisions()` when
hitting an error path. Restructure the function to have a common exit
path such that we can easily clean up the list and thus plug this memory
leak.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `get_replay_opts()`, we override the `gpg_sign` field that already
got populated by `sequencer_init_config()` in case the user has
"commit.gpgsign" set in their config. This creates a memory leak because
we overwrite the previously assigned value, which may have already
pointed to an allocated string.
Let's plug the memory leak by freeing the value before we overwrite it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We implicitly depend on `the_repository` in our hook subsystem because
we use `strbuf_git_path()` to compute hook paths. Remove this dependency
by accepting a `struct repository` as parameter instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation claims that "recursive defaults to the diff.algorithm
config setting", but this is currently not the case. This fixes it,
ensuring that diff.algorithm is used when -Xdiff-algorithm is not
supplied. This affects the following porcelain commands: "merge",
"rebase", "cherry-pick", "pull", "stash", "log", "am" and "checkout".
It also affects the "merge-tree" ancillary interrogator.
This change refactors the initialization of merge options to introduce
two functions, "init_merge_ui_options" and "init_merge_basic_options"
instead of just one "init_merge_options". This design follows the
approach used in diff.c, providing initialization methods for
porcelain and plumbing commands respectively. Thanks to that, the
"replay" and "merge-recursive" plumbing commands remain unaffected by
diff.algorithm.
Signed-off-by: Antonin Delpeuch <antonin@delpeuch.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A CPP macro USE_THE_REPOSITORY_VARIABLE is introduced to help
transition the codebase to rely less on the availability of the
singleton the_repository instance.
* ps/use-the-repository:
hex: guard declarations with `USE_THE_REPOSITORY_VARIABLE`
t/helper: remove dependency on `the_repository` in "proc-receive"
t/helper: fix segfault in "oid-array" command without repository
t/helper: use correct object hash in partial-clone helper
compat/fsmonitor: fix socket path in networked SHA256 repos
replace-object: use hash algorithm from passed-in repository
protocol-caps: use hash algorithm from passed-in repository
oidset: pass hash algorithm when parsing file
http-fetch: don't crash when parsing packfile without a repo
hash-ll: merge with "hash.h"
refs: avoid include cycle with "repository.h"
global: introduce `USE_THE_REPOSITORY_VARIABLE` macro
hash: require hash algorithm in `empty_tree_oid_hex()`
hash: require hash algorithm in `is_empty_{blob,tree}_oid()`
hash: make `is_null_oid()` independent of `the_repository`
hash: convert `oidcmp()` and `oideq()` to compare whole hash
global: ensure that object IDs are always padded
hash: require hash algorithm in `oidread()` and `oidclr()`
hash: require hash algorithm in `hasheq()`, `hashcmp()` and `hashclr()`
hash: drop (mostly) unused `is_empty_{blob,tree}_sha1()` functions
When the user adds to "git rebase -i" instruction to "pick" a merge
commit, the error experience is not pleasant. Such an error is now
caught earlier in the process that parses the todo list.
* pw/rebase-i-error-message:
rebase -i: improve error message when picking merge
rebase -i: pass struct replay_opts to parse_insn_line()
